• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1437-1442
• /
• 1994

Self propagating synthesis and thermal explosion of combustion reactions were applied to Al/K2Cr2O7/Al2O3 system as the first stage for a production of magnesia-chromium refractory. Several factors related to products made by two combustion reactions were considered and properties of products were characterised. Two processes were required to preheat upto at least 80$0^{\circ}C$ for the thermal explosion and the self propagating synthesis. These processes were so violent and explosive that alumina as diluent was added to the system in order to absorb the reaction heat and reduce the reaction rate. The products consisted of crystal phases of KAl5O8, Cr2O3, Al2O3, K2CrO4, and K2Al2O4.3H2O. The amount of KAl5O8 and K2Al2O4.3H2O crystal phases of products were decreased with further addition of alumina.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.385-392
• /
• 2023

A solution combustion process for the synthesis of hollandite (BaAl₂Ti₆O₁₆) powders is described. SYNROC (synthetic rock) consists of four main titanate phases: perovskite, zirconolite, hollandite and rutile. Hollandite is one of the crystalline host matrices used for the disposal of high-level radioactive wastes because it immobilizes Sr and Lns elements by forming solid solutions. The solution combustion synthesis, which is a self-sustaining oxi-reduction reaction between a nitrate and organic fuel, generates an exothermic reaction and that heat converts the precursors into their corresponding oxide products in air. The process has high energy efficiency, fast heating rates, short reaction times, and high compositional homogeneity. To confirm the combustion synthesis reaction, FT-IR analysis was conducted using glycine with a carboxyl group and an amine as fuel to observe its bonding with metal element in the nitrate. TG-DTA, X-ray diffraction analysis, SEM and EDS were performed to confirm the formed phases and morphology. Powders with an uncontrolled shape were obtained through a general oxide-route process, confirming hollandite powders with micro-sized soft agglomerates consisting of nano-sized primary particles can be prepared using these methods.

• 한국분말재료학회지
• /
• 제2권2호
• /
• pp.158-164
• /
• 1995

Synthesis of the NiTi shape memory alloy using the thermal explosion mode of the self-propagating high-temperature synthesis has been investigated. The significant fractions of intermetallics phases were found to form at the Ti/Ni powder interface during the heating to the ignition temperature and seemed to influence the relative fraction of phases in the final products. As the heating rate to the ignition temperature was increased, the combustion temperature and the fraction of NiTi in the final reaction products were increased. The synthesis reaction under 70 MPa compressive pressure yielded a reaction product with 98% theoretical density.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.659-665
• /
• 2015

The self-propagating high temperature synthesis approach was applied to synthesize amorphous boron nano-powders in argon atmospheres. For this purpose, we investigated the characteristics of a thermally induced combustion wave in the $B_2O_3+{\alpha}Mg$ system(${\alpha}=1.0-8.0$) in an argon atmospheres. In this study, the exothermic nature of the $B_2O_3-Mg$ reaction was investigated using thermodynamic calculations. Experimental study was conducted based on the calculation data and the SHS products consisting of crystalline boron and other compounds were obtained starting with a different initial molar ratio of Mg. It was found that the $B_2O_3$ and Mg reaction system produced a high combustion temperature with a rapid combustion reaction. In order to regulate the combustion reaction, NaCl, $Na_2B_4O_7$ and $H_3BO_3$ additives were investigated as diluents. In an experimental study, it was found that all diluents effectively stabilized the reaction regime. The final product of the $B_2O_3+{\alpha}Mg$ system with 0.5 mole $Na_2B_4O_7$ was identified to be amorphous boron nano-powders(< 100 nm).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.620-623
• /
• 2001

The peculiarities of using Self-propagating High-temperature Synthesis (SHS) and solid state phase synthesis for production of high temperature superconductor materials are discussed. Oxide superconductors with general formula $ReBa_2$$Cu_3$$O_{7-x}$ (Re= Y, Yb, Sm, Nd) have been made with using barium oxide initial powder instead of traditional barium carbonate. X-ray powder diffraction showed a single phase orthorhombic perovskite structure was produced in all reactions. Phenomena observed during the grinding of the reactant mixture are presented. Mechano-chemical activation - as a pretreatment of the reactant mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product.

• 화약ㆍ발파
• /
• 제33권3호
• /
• pp.21-28
• /
• 2015

본 연구의 목적은 연속적 폭굉속도(VOD) 측정시스템을 이용하여 상용 테르밋 반응 혼합제의 연속적인 연소전파거동을 측정하기 위한 방법을 제안하기 위함이다. 두 종류의 상용 VOD 센서(VOD PROBEROD-OS, VOD PROBEROD-HS)와 자체개발한 VOD 센서(VOD PROBEROD-ES)를 기존 연속적 VOD 측정시스템에 적용하여 테르밋 반응과정에서 발생하는 연소전파속도(VOC)를 측정한 결과, 자체 개발한 VOD PROBEROD-ES 센서만 정상적인 연속적 연소전파거동을 보여주었다. 결과적으로, 철재튜브 내 장전된 테르밋 반응 혼합제는 기폭점으로부터 100mm 이내에서 약 200m/s의 연소전파속도를 보였으며, 100mm와 300mm 구간에서 급작스럽게 증가하여 음속의 2배에 가까운 VOC를 나타내었다. 그 이후 서서히 증가하여 최종적으로 800m/s까지 증가하는 경향을 보였다. 이러한 결과는 테르밋 반응 혼합제를 이용하여 정상적인 VOC나 위력을 기대하기 위해서는 철재튜브 등으로 완전히 구속된 상태에 길이 300mm 이상 장전하여야 함을 의미한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.187-192
• /
• 2008

A simplified model for an isolated aluminum particle burning in air is presented. Burning process consists of two stages, ignition and quasi-steady combustion (QSC). In ignition stage, aluminum which is inside of oxide film melts owing to the self heating called heterogeneous surface reaction (HSR) as well as the convective and radiative heat transfer from ambient air until the particle temperature reaches melting point of oxide film. In combustion stage, gas phase reaction occurs, and quasi-steady diffusion flame is assumed. For simplicity, 1-dimesional spherical symmetric condition and flame sheet assumption are also used. Extended conserved scalar formulations and modified Shvab-Zeldovich functions are used that account for the deposition of metal oxide on the surface of the molten aluminum. Using developed model, time variation of particle temperature, masses of molten aluminum and deposited oxide are predicted. Burning rate, flame radius and temperature are also calculated, and compared with some experimental data.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1096-1102
• /
• 1993

Titanium nitride was synthesized by reacting Ti powder with nitrogen gas using SHS method. In this process, the effects of nitrogen pressure, dilution with TiN, or additiion of titanium hydride(TiH1.924) on the conversion of Ti to TiN were investigated. In particular, much effects were given to solve the problem of the conversion drop due to partial melting and subsequent sintering of Ti parciels, by controlling combustion temperature and combustion wave velocity via mixing Ti powder with TiN or/and TiH1.924. For the diluted titanium powders with TiN, the conversion close to 100% was resulted when the nitrogen pressure was over 8atm and with diluent content of 60wt%, and the self-propagating reaction was not sustained when the diluent content was higher than 60wt%. For samples mixed to be 55wt% in Ti component in the mixture of Ti, TiH1.924, and 45% TiN, the conversion was closed to 100% when the amount of titanium hydride added was over 7wt% and the nitrogen pressure was higher than 5atm. The combustion reaction, however, was not sustained when titanium hydride added was more than 10wt%.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.97-104
• /
• 2002

The conventional regenerative system has a high thermal efficiency as well as energy saving using the high preheated combustion air. in spite of these advantages, it can not avoid high nitric oxide emissions. Recently, flameless combustion has received much attention to solve these problems. In this research, numerical analysis is performed for flow-combustion phenomena in the self regenerative burner. In this analysis we used Fluent 6.0 code. the that is developed for commercial use, Methane gas is used as a fuel and two-step reaction model for methane and Zeldovich mechanism for NO generation are used. the velocity of the preheated combustion air is used as a parameter and we analyze the characteristics of flow-field, temperature distributions and NO emissions. Due to the increased recirculation rate, the maximum temperature of flame is significantly increased and NOx emissions is reduced

• 한국자기학회지
• /
• 제9권2호
• /
• pp.78-84
• /
• 1999

고온연소합성법(self-propagating high temperature synthesis)을 이용하여(Ni, Zn)Fe2O4 분말을 제조하고 초기 분말의 크기와 산소압에 따른 생성물의 미세조직과 자기적 특성을 조사하였다. (Ni, Zn) 페라이트 분체는 다양한 입도의 Fe, Fe2O3, NiO, ZnO의 원료 분말을 n-hexane 용액에서 습식으로 spex mill을 사용하여 5분 혼합하고 12$0^{\circ}C$ 진공로에서 24시간 건조한 후 0.5~10기압의 산소압에서 고온연소합성 반응으로 제조하였다. 성형 압력이 없는 경우 평균 연소온도와 연소속도는 최대 약 125$0^{\circ}C$와 9.8mm/sec였으며 산소압과 ZnO입도가 감소하면 감소하였다. 고온연소합성된 시료는 다공질 구조를 갖고 있으며 X-선 회절 시험으로 시편들의 spinel구조를 관찰하였다. ZnO입도와 산소압이 증가하면 보자력, 최대자화, 잔류자화, 각형비 및 큐리 온도는 각각 13.24Oe, 43.88emu/g, 1.27emu/g, 0.0034emu/gOe, 37.8$^{\circ}C$에서 11.83Oe, 68.87emu/g, 1.23emu/g, 0.00280emu/gOe, 439.$^{\circ}C$와 7.99Oe, 75.84emu/g, 0.791emu/g, 0.001937emu/gOe, 53.8$^{\circ}C$로 변화하였다. 산소압에 따른 겉보기 활성화에너지를 고려하면 페라이트의 연소합성 반응은 ZnO입도와 산소압에 크게 의존한다.