• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.3
• /
• pp.872-880
• /
• 2016

The purpose of this study is to find the research trends relating to flipped learning through keyword network analysis. For investigating this topic, final 100 papers (removed due to overlap in all 205 papers) were selected as subjects from the result of research databases such as RISS, DBPIA, and KISS. After keyword extraction, coding, and data cleaning, we made a 2-mode network with final 202 keywords. In order to find out the research trends, frequency analysis, social network structural property analysis based on co-keyword network modeling, and social network centrality analysis were used. Followings were the results of the research: (a) Achievement, writing, blended learning, teaching and learning model, learner centered education, cooperative leaning, and learning motivation, and self-regulated learning were found to be the most common keywords except flipped learning. (b) Density was .088, and geodesic distance was 3.150 based on keyword network type 2. (c) Teaching and learning model, blended learning, and satisfaction were centrally located and closed related to other keywords. Satisfaction, teaching and learning model blended learning, motivation, writing, communication, and achievement were playing an intermediary role among other keywords.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.2
• /
• pp.145-150
• /
• 2014

This study investigates the preparation of anti-reflective (AR) coating film to improve the efficiency of solar cell. The AR coating film was successfully obtained by dip-coating with AR coatings prepared by sol-gel method. Fluoroalkylsilane was additionally introduced into the coatings to give the self-cleaning effect of AR coating film. We performed the abrasion test, pencil scratch hardness test and cross-cut test to identify the mechanical strength of AR coating film. As the results, the transmittance of AR coating films with 9.07, 18.13 and 27.20 of IPA/MTMS molar ratios were 93.1, 93.6 and 95.3%, respectively. The water contact angle and transmittance of AR coating film increased by the introduction of hydrophobicity. The prepared AR coating film shows the high level of abrasion, hardness and adhesion. The IPA/MTMS molar ratio of 27.20 and the withdrawing speed range of 0.20 ~ 0.28cm/sec are the optimal coating condition in terms of the transmittance and mechanical strength of AR coating film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.4
• /
• pp.215-217
• /
• 2016

For the improvement of the anti-pollution properties of porcelain electrical insulators, in this study, we have applied the functional film to the surface of insulator. The functional films were coated on the ceramic substrates which components were like the porcelain electrical insulator. The coating material was applied to ceramic substrate by spray coating method and then the film was cured at around $300^{\circ}C$ for 10 minutes with different gas ambient, such as $O_2$, $N_2$, and only vacuum. We have measured the contact angle of the coated surface, and obtained the lowest angle ($8.9^{\circ}$) and a strong hydrophilic property at vacuum condition. The anti-pollution properties were measured, revealing that as the contact angle decreased, the anti-pollution properties improved. The mechanical hardness and adhesion were both excellent regardless of the annealing ambient.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.440-444
• /
• 2016

Titanium oxide ($TiO_2$) thin films were synthesized on polymer insulator and Si substrates by atomic layer deposition (ALD) method. The surface and electrical properties of $TiO_2$ films synthesized at various ALD cycle numbers were investigated. The synthesized $TiO_2$ films exhibited higher contact angle and smooth surface. The contact angle of $TiO_2$ films was increased with the increase of ALD-cycle number. Also, the rms surface roughness of films was slightly rough with the increase of ALD-cycle number. The leakage current on $TiO_2$ film surface synthesized at various conditions were uniformed, and the values were decreased with the increase of ALD-cycle number. In the results, the performance of $TiO_2$ films for self-cleaning critically depended on a number of ALD-cycle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.228.1-228.1
• /
• 2014

투명전도성 산화물(TCO,Transparent Conductive Oxide) 물질로 널리 사용되는 ITO 박막은 산화물 반도체를 평판 디스플레이용 투명전극 재료로 개발하기 위한 많은 연구가 진행되고 있다. ITO (Indium tin oxide)는 약 3.5 eV 정도의 넓은 밴드갭을 가진 축퇴반도체로서 전기적 및 광학적 특성이 우수하기 때문에 대표적 투명전도성 박막으로 가장 많이 사용되고 있다.현재 양산화된 ITO의 조성비는 90:10WT%인 타겟을 사용하는대 투명전극은 비저항이 $1{\times}10-3{\Omega}/sq$이하로 면저항이 $103{\Omega}/sq$전기전도성이 우수하고 380에서 780 nm의 가시광선 영역에서의 투과율이 80% 이상이라는 두 가지 성질을 만족시키는 박막이다. 본 실험에서는 SnO2 1~5wt% 인 ITO타겟을 제작하고 RF-Magnetron Sputtering을 사용하여 영구자석을 이용한 고밀도 플라즈마로 높은 점착성과, 균일한 박막 및 대면적 공정이 가능한 RF-magnetron sputtering방법으로 기판인 Slide glass위에 ITO를 증착하여 광학적 특성 및 전기적 특성에 대하여 측정하였다. 전기적, 광학적 특성 등 XRD을 통해 분석하였다. 그리고 증착된 모든 ITO 박막에서 가시광 투과율을 측정하기 위해 UV-Vis spectrophptometer을 이용하여 분석한 결과 90%이상의 높은 투과율이 측정되었다. ITO박막은 Anti-Fogging, Self-Cleaning, Solar cell 및 디스플레이소자 등 다양한 산업에 이용 가능할 것으로 생각된다.

• Journal of Biosystems Engineering
• /
• v.42 no.1
• /
• pp.12-22
• /
• 2017

Purpose: This aim of this study was to develop a pick-up type pulse crop harvester for harvesting cut and dried pulse crop. Methods: The pick-up type pulse crop harvester was designed and constructed. Its specifications and operating performance were investigated. Results: Compared with conventional bean harvesters, the pick-up type pulse crop harvester adopted seven rows of chains with tines to pick-up the cut and dried pulse crop on a flat or ridged field, two transverse threshing drums with steel wire teeth to reduce the threshing speed, and a tilt plate and plastic bucket elevator for conveying clean grain to reduce damage. The threshing speed and the oscillating frequency of the separating and cleaning parts according to crop type and condition could be varied easily to efficiently use engine power and to improve harvesting performance. The harvester showed forward speed ranges of 0 ~ 1.5 m/s during harvesting operation, and 0 ~ 2.5 m/s during road travelling. The pick-up width of the harvester was about 1 m. Conclusions: The pick-up type self-propelled 51.5 kW harvester was designed and constructed to harvest cut and dried pulse crop. The effective field capacity of the harvester was predicted as above 40 a/h.

• The Journal of Korean Physical Therapy
• /
• v.22 no.2
• /
• pp.31-38
• /
• 2010

Purpose: We investigated the relationship of depression and the ability to engage in activities of daily living in the elderly. Methods: Subjects (n = 182) were 60 years or older and who attended the Senior College of Gimhae Senior Welfare Center. We collected data via a questionnaire, through a Self- recording method and through individual interviews. We collected data on personal and general characteristics, level of depression, and activities of daily living. Results: Among all subjects, 51.1% reported having depressionMild depression was reported by 29.7% (54 subjects), moderate depression by 13.2% (24 subjects), and severe depression by 8.2% (15 subjects). Activities of daily living, including walking, climbing stairs, standing from a chair and sitting on and using toilets, using a telephone, bathing, shopping, cleaning house, and managing money were significantly lower in elderly subjects who were depressed (p<0.05). The greater the level of depression, the less able they were to engage in activities of daily living. Conclusion: These findings may help us achieve early detection of depression in the elderly and provide mediated arbitration so that they can have better health condition and greater ability to engage in activities of daily living.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.185-188
• /
• 2013

This study was carried out for microfiltration tubular membrane module equipped with self-designed air injection nozzle in order to determine the permeate flux due to the effect of membrane fouling reduction. The 0.1 wt% yeast particle solution was used as a feed solution and permeation tests were performed for the cases with and without air injection. Permeation fluxes were measured and analyzed to examine the effect of membrane fouling reduction. While the permeation flux without air injection decreased continuously, that with air injection was improved more than 30 percent than that of no air injection case.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.273-273
• /
• 2012

최근 스마트 윈도우, 자가세정(Self-Cleaning), 김서림방지(Anti-Fogging), 디스플레이 표시장치, 대전방지 코팅 등 다각적으로 활용이 가능한 PTFE (Ploytetrafluoroethylene)를 Sol-gel, Sputtering, Spin-Coating, CVD (Chemical vapor deposition)방법을 이용하여 낮은 표면에너지와 나노사이즈의 표면 거칠기를 가지는 $150^{\circ}$ 이상의 초-발수성 표면에 대한 많은 연구가 진행되고 있다. 본 실험에서는 영구자석을 이용한 고밀도 플라즈마로 높은 점착성과, 균일한 박막 및 대 면적 공정이 가능한 RF-magnetron sputtering방법을 이용하여 Plasma etching으로 표면적의 거칠기와 낮은 표면에너지를 만든 뒤, 발수특성을 가진 PTFE를 증착하여 접촉각 변화와 구조적 및 광학적 특성을 측정하였다. AFM (Atomic Force Microscope)측정결과 100 w에서 가장 높은 1.7 nm의 RMS(Root mean square)값이 측정되었고, 접촉각 측정결과 Plasma etched glass는 25 w에서 125 w로 증가함에 따라 친수성을 나타내었으며, 100 w에서 가장 낮은 $15^{\circ}$의 접촉각을 나타내었다. PTFE박막을 증착하였을 때는 100 w에서 $150^{\circ}$의 초발수 특성을 나타내었고, 투과율 측정 결과 85%이상의 높은 투과율을 나타내었다. Plasma etching을 이용한 PTFE 발수 특성은 비가 오면 자동으로 이물질이 씻겨 내리는 자동차 유리등의 개발이 가능하고, 높은 투과율이 요구되는 액정표시장치(LCD)같은 차세대 대형 디스플레이의 표면 코팅에 사용이 가능 할 것이라 사료된다. 본 연구는 중소기업청에서 지원하는 2011년도 산학연 공동기술개발 지원사업의 연구수행으로 인한 결과물임을 밝힙니다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.89.2-89.2
• /
• 2012

$150^{\circ}$ 이상의 접촉각을 가지는 초소수성 표면은 self-cleaning, anti-fingerprint, anti-contamination 등의 특성을 가지므로 전자, 도료, 자동차 등 다양한 산업에서 활용될 수 있다. 재료 표면의 친/소수성은 물리적 요인과 화학적 요인 두 가지 요인을 조절함으로써 제어할 수 있다. 즉, 표면의 거칠기를 크게 하거나 표면에너지를 낮춰줌으로써 초소수성 표면을 구현할 수 있다. 실리카는 자연계에 매우 풍부하게 존재하고 있으며, 생체무해하며 내구성과 내마모성, 화학적 안정성, 고온 안정성 등을 지니고 있어 박막소재로 이용하기에 우수한 특징을 지니고 있다. 이러한 실리카 초소수성 코팅층을 형성하는 방법으로 본 연구에서는 전기분무법으로 마이크로 크기의 실리카 입자로 형성된 코팅층을 형성하였다. 이러한 마이크로 구조의 표면거칠기를 더욱 높이기 위하여 금 나노입자를 부가적으로 형성시켜 마이크로-나노구조 혼성의 계층구조를 만들고자 하였다. 금 나노입자는 자외선 조사 광환원법을 사용하였고, 이러한 계층구조에 플루오린 처리를 하여 계층구조 초소수성 코팅층을 형성하였다. 계층구조를 가지는 실리카 코팅층은 물 이외에 표면장력이 낮은 용액에서도 높은 접촉각을 보였고, 이러한 코팅층의 고온 안정성과 내구성, UV 저항성 등을 조사하여 실제 응용 가능성을 검토하였다.