• 한국유체기계학회 논문집
• /
• 제10권5호
• /
• pp.20-26
• /
• 2007

Some gate valves are susceptible to pressure locking and thermal binding which prevent the safety function. The safety related gate valves susceptible to pressure locking and thermal binding shall be identified and taken preventive actions to ensure the safety function. The identification of the gate valves susceptible to pressure locking and thermal binding needs the evaluation of system design, valve and piping arrangement, test requirements, and operating conditions. Application of preventive methods should consider the system safety function, applicability, effectiveness, interface with system design, and cost. The selection procedure of valves susceptible to pressure locking and thermal binding can be effectively used in industry including nuclear power plants. In order to prevent the pressure locking, the hole can be drilled through the one disc of upstream side or down stream and the external equalizing line can be installed from bonnet to downstream or upstream. The double disc parallel seat valve type can be used instead of flexible wedge gate valve to prevent the thermal binding. The identification of gate valves susceptible to pressure locking and thermal binding, and preventive actions will meet the regulatory requirements and enhance the availability and safety of plants.

• 생태와환경
• /
• 제56권4호
• /
• pp.393-405
• /
• 2023

This study was conducted to select indicators for assessing national biodiversity. For this purpose, 140 biodiversity-related indicators were identified as a result of inventorying biodiversity-related indicators used in Korea and abroad, and when these indicators were applied to the pressure, status, and response indicator system, it was found that status indicators accounted for the largest number of indicators, with 29 pressure, 59 status, and 44 response. We also categorized the status indicators into genes, species, habitat, function, and quality, and found that species and habitat indicators accounted for the majority. Pressure indicators were categorized into direct exploitation, pollution, alien species, climate change, and habitat change. As a result, it was found that direct exploitation and pollution accounted for most of the pressure indicators. In addition, this study used internationally used indicator selection criteria to establish criteria for selecting domestic biodiversity assessment indicators. Using this list of indicators and indicator selection criteria, we evaluated the prioritization of domestically applicable biodiversity indicators through relevant expert consultations. 1) Vegetation class, 2) Land cover indicators, and 3) Change of protected area ranked highly. In fact, these indicators have been used in many studies due to the availability of assessable data. However, most of the highly scored indicators are based on ecosystem area, and further consideration of ecosystem functions and components(species) is needed.

• Parasites, Hosts and Diseases
• /
• 제55권2호
• /
• pp.175-183
• /
• 2017

Codon usage bias (CUB) is a unique property of genomes and has contributed to the better understanding of the molecular features and the evolution processes of particular gene. In this study, genetic indices associated with CUB, including relative synonymous codon usage and effective numbers of codons, as well as the nucleotide composition, were investigated in the Clonorchis sinensis tyrosinase genes and their platyhelminth orthologs, which play an important role in the eggshell formation. The relative synonymous codon usage patterns substantially differed among tyrosinase genes examined. In a neutrality analysis, the correlation between $GC_{12}$ and $GC_3$ was statistically significant, and the regression line had a relatively gradual slope (0.218). NC-plot, i.e., $GC_3$ vs effective number of codons (ENC), showed that most of the tyrosinase genes were below the expected curve. The codon adaptation index (CAI) values of the platyhelminth tyrosinases had a narrow distribution between 0.685/0.714 and 0.797/0.837, and were negatively correlated with their ENC. Taken together, these results suggested that CUB in the tyrosinase genes seemed to be basically governed by selection pressures rather than mutational bias, although the latter factor provided an additional force in shaping CUB of the C. sinensis and Opisthorchis viverrini genes. It was also apparent that the equilibrium point between selection pressure and mutational bias is much more inclined to selection pressure in highly expressed C. sinensis genes, than in poorly expressed genes.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.422-427
• /
• 2008

The major cause of Concrete Spalling at high temperatures can be divided into the Vapor Pressure Rising, caused by the increase in free water temperature within the concrete, and Pore Pressure Rising induced by the vapor moving into dense pores within the concrete. Although the occurrence of spalling within concrete caused by these pressure increases can be assessed experimentally, a close examination into Mechanistic influence against various spalling factors shall be carried out first by using Mathematical Modeling and Theoretical Equations. The Spalling Prospect Process by theoretical mechanism is expedited in order of the following; selection of heating condition (fire strength and flame heating direction), a selection of constituent elements, an analysis of heat transmission, an analysis of moisture movement, distribution of water content, an analysis of pore/vapor pressure, and assessment of spalling occurrence.

• 정보처리학회논문지A
• /
• 제19A권1호
• /
• pp.45-50
• /
• 2012

최근 내장형 프로세서가 다양한 휴대 기기에서 사용이 급격히 증가됨에 따라, 빠른 수행 속도와 저전력을 지원하는 내장형 프로세서를 제작하기 위해 대상 응용 프로그램에 최적환 된 설계가 요구되고 있다. 이를 위해, 프로세서들은 다중 출력 명령어형태의, 특별한 명령어들을 추가하고 있다. 여기서 다중 출력 명령어란 다수의 결과값을 병렬적으로 출력하는 명령어를 말한다. 하지만, 이러한 다중 출력 명령어들은 기존 컴파일러에서 생성하지 못하는 문제점이 있다. 그래서, 이를 위한 컴파일 알고리즘이 개발되었지만, 이 알고리즘에서는 register pressure를 고려하지 않아서 최적의 성능을 발휘할 수가 없었다. 본 논문에서는 register pressure를 고려하는 알고리즘을 새롭게 제안하고, 그 결과 기존 알고리즘에 비해서 평균 3%의 코드 사이즈 감소와 2.7% 수행 시간 향상을 더 이룰 수 있었다.

• 한국공작기계학회논문집
• /
• 제10권2호
• /
• pp.48-55
• /
• 2001

An accumulator in hydraulic systems stores kinetic energy during braking action, and then that control hasty surge pres-sure. This study suggests a method to select the capacity of accumulator to control surge pressure to a desired degree. The selection method is based upon a trial and error approach and computer simulation. A mathematical dynamic model of the system was derived and the parameters in the model were identified from experimental data. A series of computer simulation were done for the brake action. The results of the simulation work were compared with those of experiments. These results of the computer simular-tion and experiments show that the proposed method can be applied effectively to control the surge pressure of the hydraulic regenerative brake systems.

• Wind and Structures
• /
• 제8권4호
• /
• pp.283-294
• /
• 2005

This paper describes the work of the Working Group on wind pressure coefficients on low-rise structures, one of the groups set up by the International Association of Wind Engineering in 1999. General aspects of wind loading on low-rise structures are summarized. The definition, derivation and codification of loading coefficients is described. Comparisons of pressure coefficients on low rise structures are made between a selection of wind loading standards. Recommendations for consistency and for the harmonization of these coefficients are given.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.485-501
• /
• 1997

Pressure control is possible driving a simple ON/OFF 3-way valve of hydraulic servo system by pulse width modulation signal. But the pressure varies according to the duty ratio and carrier frequency and repeated on-off action induces pressure fluctuation. So equations for mean pressure and ripple amplitude are theoretically derived as a function of on/off time, the system parameters which decide the pressure characteristics are arranged and they are verified by experimental study. As the result selection criteria for the major design parameters are established and the basic strategy to suppress the unnecessary fluctuation can be provided for a hydraulic pressure control system using these type of valves.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.7-14
• /
• 2010

Ultra high pressure system, which can be generally increased over 1,000bar, needs to have sealing mechanism to protect leakage and selection of the materials used in the intensifier. Components such as pressure vessel, hydraulic hose assembly, accumulator, hydraulic cylinder, hydraulic valve, pipe, etc., are tested under the impulse-pressure conditions. Components need to be tested under 1.5 to 3 times of rated pressure to check the tolerance even though rated pressure range of these components are not ultra high pressure. So, the ultra high pressure system needs to be equiped to test components. In this study, safety assessments of ultra high pressure system which are using failure analysis of components, changing the types of the control system, and finite element analysis with static condition, are investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.107-111
• /
• 1997

Pressure control is possible by pulse width modulation signal driving a simple ON/OFF 2-way valve of hydraulic servo system. But it indices pressure fluctuation due to repeated on-off action and the pressure varies according to the duty ratio and carrier frequency. So mean pressure and ripple amplitude are arranged by experimental study as the driving signal change which decides the pressure characteristics. As the result selection criteria of the major design parameters may be established and the basic strategy to suppress the unnecessary flucturion may be provided for a hydraulic pressure control system.