• Nuclear Engineering and Technology
• /
• v.38 no.6
• /
• pp.489-504
• /
• 2006

A review has been made for the previous studies on safety of a geologic repository for high-level radioactive wastes (HLW) related to autocatalytic criticality phenomena with positive reactivity feedback. Neutronic studies on geometric and materials configuration consisting of rock, water and thermally fissile materials and the radionuclide migration and accumulation studies were performed previously for the Yucca Mountain Repository and a hypothetical water-saturated repository for vitrified HLW. In either case, it was concluded that it would be highly unlikely for an autocatalytic criticality event to happen at a geologic repository. Remaining scenarios can be avoided by careful selection of a repository site, engineered-barrier design and conditioning of solidified HLW. Thus, criticality safety should be properly addressed in regulations and site selection criteria. The models developed for radiological safety assessment to obtain conservatively overestimated exposure dose rates to the public may not be used directly for the criticality safety assessment, where accumulated fissile materials mass needs to be conservatively overestimated. The models for criticality safety also require more careful treatment of geometry and heterogeneity in transport paths because a minimum critical mass is sensitive to geometry of fissile materials accumulation.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.27-34
• /
• 1998

According to growing interest in environmental quality with improvements of a standard of living site selection problems such as waste landfill sites, caused regional conflicts. This study investigates a waste landfill estimation method that was used to for storage, management, analysis and display of environmental information provided by geo-spatial information system(GIS) and analytic hierarchy process(AHP) as a decision-making method. If GIS is integrated with AHP, site selection problems of environmental hatred facilities shall be able to be very useful, because of AHP with flexibility which appropriately reflects opinions of the related group.

• Journal of Korean Society of Transportation
• /
• v.19 no.5
• /
• pp.99-108
• /
• 2001

A framework of using and integrating GIS and OR tools for determining the best site selection has been provided. In this research, we demonstrated that both the P-Median heuristic method and MIP method can be successfully applied to the optimum site selection problem of oil tank location selection. Furthermore, the results identified by both approaches are identical. To accomplish this, both GIS road and maritime networks have been constructed and combined to calculated the minimum distance matrix, which is required by both approaches. After the application to the Korean peninsula, the facility locations chosen are Kunsan, Yosu, Busan, and Okgye for each district. As has been shown, the power of GIS and both algorithm have been demonstrated throughout the research and further similar research can also be conducted using the power of GIS and Operations Research tools.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1302-1304
• /
• 1999

This Paper Proposes the FACTS site selection method using subtransmission system reduction. A general method which uses the sensitivity of the variation in voltage and reactive Power has been used to determine the location of shunt type FACTS device, but there is a difficulty to find a proper location due to the overestimation of the effect of sub-transmission systems. Therefore, there is a need to reduce sub-transmission system for finding an effective location of shunt type FACTS devices such as SVC(Static Var Compensator), STATCOM(Static Synchronous Compesator), and so on.

• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• v.1 no.1
• /
• pp.9-27
• /
• 2013

Nagra was established in 1972 by the Swiss nuclear power plant operators and the Federal Government to implement permanent and safe disposal of all types of radioactive waste generated in Switzerland. The Swiss Nuclear Energy Act specifies that these shall be disposed of in deep geological repositories. A number of different geological formations and sites have been investigated to date and an extended database of geological characteristics as well as data and state-of-the-art methodologies required for the evaluation of the long-term safety of repository systems have been developed. The research, development, and demonstration activities are further supported by the two underground research facilities operating in Switzerland, the Grimsel Test Site and the Mont Terri Project, along with very active collaboration of Nagra with national and international partners. A new site selection process was approved by the Federal Government in 2008 and is ongoing. This process is driven by the long-term safety and feasibility of the geological repositories and is based on a step-wise decision-making approach with a strong participatory component from the affected communities and regions. In this paper a brief history and the current status of the Swiss radioactive waste management program are presented and special characteristics that may be useful beyond the Swiss program are highlighted and discussed.

• Journal of Ginseng Research
• /
• v.37 no.4
• /
• pp.491-495
• /
• 2013

Wood-cultivated ginseng, including roots in its dried form, is produced in forest land without using artificial facilities such as light barriers. To identify suitable sites for the propagation of wood-cultivated ginseng, factor combination technique (FCT) and linear combination technique (LCT) were used with geographic information system and the results were superimposed onto an actual wood-cultivated ginseng plantation. The LCT more extensively searched for suitable sites of cultivation than that by the FCT; further, the LCT probed wide areas considering the predominance of precipitous mountains in Korea. In addition, the LCT showed the much higher degree of overlap with the actual cultivation sites; therefore, the LCT more comprehensively reflects the cultivator's intention for site selection. On the other hand, the inclusion of additional factors for the selection of suitable cultivation sites and experts' opinions may enhance the effectiveness and accuracy of the LCT for site application.

• New & Renewable Energy
• /
• v.18 no.4
• /
• pp.54-63
• /
• 2022

This study compared and analyzed major policies and operational processes of countries that introduced the Renewable Energy Plan Site, through literature analysis of published governmet data, and previous research results. The procedures of the Renewable Energy Plan Site were classified into planned location designations, selection of power generation business operators, designation of the business' district and development and evaluating the factors derived for each procedure. Four contries were selected to be compared and analyzed, namely: Denmark, Germany, the United Kingdom and Japan. This was based on the criteria used to introduce and operate the Renewable Energy Plan Site, activate renewable energy supply and check the applicability of Korea's policies. It was analyzed that the priority of the planned location for the procedure was different for each country depending on the conditions there.

• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.83-91
• /
• 2011

The purpose of this study is to select appropriate location factors for wind power plant, provide detailed classification criteria, and find out appropriate sites for installing wind power plant in Gangwondo. In this study, the following 11 factors were extracted for site selection of wind power plant : wind resource, topography (valley angle, distance to the ridge), forest density, land use, preservation area, national park, Baekdu-Daegan, noise, shade, Transmission Line, and approaching roads. Each factor had relatively different level of importance so that AHP (Analytic Hierarchy Process) technique was used to calculated the weighted value per factor. For overlay analysis, classification criteria were prepared for each factor and each factor was classified into 3 grades : very appropriate, intermediate, poor. According to overlay analysis, the areas which received the highest grade (grade 5) was only in 0.16% of the total area of Gangwondo and had a tendency to exist along the mountain ridge over 600-meter elevation. Through analyzing the yearly average of wind power density, it was proved that the wind power density of areas with grade 4 or 5 had abundant wind resource over $400W/m^2$.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.49
• /
• pp.99-113
• /
• 1999

This paper describes a study which was undertaken in Ulsan City. It attempted to develop stepwise procedures that would aid Ulsan City in making decision of primary importance: what is the optimal site location for establishing a new Industrial Technology Research Park for public development\ulcorner The presented modeling procedures are an adaption of a number of exiting methods for the evaluation of industrial site potential. The procedures to determine the best site location can be divided into three phases : (i)defining the information necessary to compare potential sites, (ii) collecting the information for each site and (iii)evaluation potential sites utilizing the location model.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.287-295
• /
• 2015

modern logistics are required to carry out functions such as timely adjustment and swift adaptation to changing patterns, and this leads to the emphasis on forming logistics parks. Logistics parks make profits using the efficiency of time and space. Such logistics parks play an important role in a corporation creating operating profits as well as acting as a method of alternative investment for individuals. Logistics parks no longer simply store materials, but have become a place that plays an important role in various areas of corporate and individual activities, and thus the analysis of the selection of the location of logistics parks and the related characteristics is extremely important. There are many existing studies on the selection of locations of logistics parks but work on the factors related to location selection by industry seem lacking. As such, in the course of this study we have used preceeding studies to draft a questionnaire on which selection factors affect the selection of logistics park location in different industries and conducted empirical analysis of the questionnaire results to uncover the factors that affect the selection of the locations of logistics parks in different industries.