• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.36-36
• /
• 2003

In the present study, growth performances of the offspring from selected brood line were compared to those of the offspring from non-selected brood line of red sea bream. Offspring groups were mass produced separately from two brood lines, selected and non-selected Korean strain. Selected brood line have been selected by fish size for four generations (upper 5∼30% per generation) and non-selected brood line is the second generation of wild population at south sea in Korea. There's no significant difference in body length between offspring from selected and non-selected brood line during early growing stage (until 96-days old). However, offspring from selected brood line had superior body weight growth than offspring from non-selected brood line. At sea cages rearing trials with communal stocking, Offspring from selected brood line showed significantly better performance in body weight, body length, weight gain, specific growth rate and feed consumption (but not in feed conversion ratio) than offspring from non-selected brood line. At 24 months old, offspring from selected brood line grew faster 1.10 times in body length and 1.41 times in body weight than offspring from non selected brood line. The response to selection when compared to a non-selected line is on average of 10% in weight per generation at 24 months old.

• 한국수산과학회지
• /
• 제37권5호
• /
• pp.400-404
• /
• 2004

Growth performances of the selected and the non-selected red sea bream (Pagrus major) lines were evaluated up to marketable size. The offspring were mass-produced either from the selected line (the fourth generation of broods from mass selection) or the non-selected line (the second generation of wild broods). Early (59 to 103 days old, trial I) and late growth performances (4 to 24 months old, trial II) were evaluated based on communal rearing in land-based tanks and sea cages, respectively. In trial I, the selected line exhibited significantly higher values in both weight gain (WG) and specific growth rate (SGR) when compared to those observed in the non-selected line (P<0.05). In trial II comprising of three growth phases (4-9, 9-16 and 16-24 months old), selected line showed only slightly improved in WG and SGR at the beginning two growth phases (4-9 and 9-16 months old) (P>0.05), however, displayed significantly higher values at the last growth phase (16-24 months old) (P<0.05). Overall WG and SGR throughout the experiment (4-24 months) were also significantly higher in the selected line than the non-selected line (P<0.05). Consequently, mean body weight of the selected line at 24 months old was 1.4-fold (40.8{\%}\;increased) as compared to that of the non-selected line. This present result indicates that mass selection of this species against the growth traits might be quite effective, and the present advance has important Implication in the productivity enhancement of red sea bream aquaculture.

• Animal Bioscience
• /
• 제36권3호
• /
• pp.417-428
• /
• 2023

Objective: Few studies have genetically monitored chickens over time, and no research has been conducted on ducks. To ensure the sustainable management of key duck breeds, we used microsatellite markers to monitor Brown Tsaiya ducks over time genetically. Methods: The second, fourth, sixth to eighth generations of the Brown Tsaiya duck selected for feeding efficiency and control lines were included in this study to investigate the genetic variations, effective population size, population structure and the differentiation between populations over time with 11 microsatellite markers derived from Brown Tsaiya duck. Results: The results showed there were a slight decrease in the genetic variations and an increase in within-population inbreeding coefficient (F_IS) in both lines, but no consistent increase in F_IS was observed in each line. The effective population size in the second and eighth generations was 27.2 for the selected line and 23.9 for the control line. The change in allele richness showed a downward trend over time, and the selected line was slightly lower than the control line in each generation. The number of private alleles (N_p) in the selected line were higher than in the control line. Moderate differentiation was observed between the second and eighth generations in the selected line (F_ST = 0.0510) and the control line (F_ST = 0.0606). Overall, differentiation tended to increase with each generation, but genetic variation and structure did not change considerably after six generations in the two lines. Conclusion: This study provides a reference for poultry conservation and helps to implement cross-generation genetic monitoring and breeding plans in other duck breeds or lines to promote sustainable management.

• 한국멀티미디어학회논문지
• /
• 제11권3호
• /
• pp.292-300
• /
• 2008

본 논문에서는 점진적인 화소 확장을 이용하여 영상 내에 존재하는 선분을 찾아내는 선분 추출 알고리즘을 제안한다. 본 논문에서 제안하는 선분 추출 방법에서는 기존의 선분 추출 방법인 허프 변환 기반 방법이나 선분의 그룹화 기반 방법과는 다른 접근법을 사용하였다. 영상이 입력되면 케니 테두리를 구하고, 테두리 화소 중 임의의 점을 선택하여 선분을 근사화 시킨 기본 직선을 만든 후, 선택된 점에서 임의의 반경 내에 있는 테두리 화소들을 선택한다. 직선과의 거리 오차와 기울기 각의 오차를 이용하여 선택된 화소에 가중치를 부여한다. 가중치 합 비교에 의해 선택된 화소들이 떨어져 있는지를 판별한 후, 가중치를 적용한 최소자승법에 의해 선 맞춤을 하여 선분을 구하게 된다. 제안된 알고리즘은 기존에 제안된 방법들과 결과를 비교하였으며, 계산 속도가 빠르면서 실제 존재하는 선분 추출이 가능하다는 것을 실험 결과를 통해 제시한다.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.129-138
• /
• 2001

The paper presents an implementation procedure of assembly line for ABS motor, which is composed of four subassemblies-yoke, grommet, housing and armature. The characteristics of ABS motor and its assembly processes are analysed, and the automation possibility of each process is examined in order to decrease assembly time. The assembly machines and facilities are then selected for automatic assembly, and the layout of the selected facilities is determined. Finally, task allocation of each worker is achieved by assembly line balancing to increase assembly productivity and efficiency. The line efficiency is also analyzed using simulation.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1998년도 Advances in Ginseng Research - Proceedings of the 7th International Symposium on Ginseng -
• /
• pp.96-102
• /
• 1998

A lot of individual ginseng plants were selected in the farmer's fields to develop new ginseng varieties with desirable traits. Among them, a promising line has been developed through comparative cultivation of several lines selected with pure line separation of local raced. It was then designated as "KC (denotes Korean Ginseng)" and tested in the regional yield and adaptation trials for 10 years. KG lines grew vigorously after 4 years of age. Especially, KG 102 line arson운 them showed traits of multiple and short stems. As for the root characters, the length of taproot of KG 101 line was longer than that of local race, Jakyung-jong, or other lines ailed the root weight of KG 102 line waIn 15 % higher than that of local race. In general, KG 101, KG 103, KG 104, and Hwangsauk-jong had good root shape. Total amount of ginsenosides of ginseng taproot was the highest in KG 103 line than in local race and other lines. In these studies, we, elected three superior lines, KG 101, KG 102, and KG 103, having characteristic of good root shape, high yield, and large amount of ginsenoside, respectively.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.580-583
• /
• 2007

Various matching methods have been introduced by investigators to improve digital elevation model (DEM) accuracy of satellite imagery. This study proposed an area-based matching method according to land cover property using correlation coefficient of pixel brightness value between the two images for DEM generation from IKONOS stereo imagery. For this, matching line (where "matching line" implies straight line that is approximated to complex nonlinear epipolar geometry) is established by exterior orientation parameters to minimize search area. The matching is carried out based on this line. Land cover classes are divided off into water, urban land, forest and agricultural land. Matching size is selected using a correlation-coefficient image in the four areas. The selected sizes are $81{\times}81$ pixels window, $21{\times}21$ pixels window, $119{\times}119$ pixels window and $51{\times}51$ pixels window in the water area, urban land, forest land and agricultural land, respectively. And hence, DEM is generated from IKONOS stereo imagery using the selected matching sizes and land cover map on the four types.

• 농업과학연구
• /
• 제38권1호
• /
• pp.7-10
• /
• 2011

In order to develop the new Miscanthus varieties for biomass, characteristics of collected materials were surveyed. Also, they were treated with S-azide(Sodium-azide) and DES(dethyl sulfate) for promising lines and 0.2% Colchicine for polyploidy, respectively. CNU-J1 line induced with chemical, DES and S-azide treatment showed shorter than others in stem height and stem diameter. CNU-N1 line treated with 10 mM DES showed earlier than non-treated lines in flowering as 7days. Among selected lines, the CNU-J1 line was crossed with DB-1 selected as a superior line and their hybrid was expected to be high in biomass than others. Especially, CNU-W1 line treated with 2.5~5.0 mM DES showed heading in M1 generation.

• 한국측량학회지
• /
• 제33권3호
• /
• pp.155-161
• /
• 2015

Dike lines are important features for describing the detailed shapes of dikes and for detecting topographic changes on dike surfaces. Historically, dike lines have been generated using only the LiDAR data. This paper proposes a new methodology for selecting an appropriate dike line on various dike surfaces using the topographic LiDAR data and multispectral orthoimages taken in the Nakdong River basins. The fi rst baselines were generated from the given LiDAR data using the modified convex hull algorithm and smoothing spline function, and the second baselines were generated from the given orthoimages by the Canny operator. Next, one baseline was selected among the two baselines at 10m intervals by comparing their elevations, and the selected baseline at 10m interval was defined as the dike line segment. Finally, the selected dike line segments were connected to construct the 3D dike lines. The statistical results show that the dike lines generated using both the LiDAR data and multispectral orthoimages had the improved horizontal and vertical accuracies than the dike lines generated only using the LiDAR data on the various dike surfaces.

• 한국지역사회생활과학회지
• /
• 제18권3호
• /
• pp.445-453
• /
• 2007

This study was to select the measurement points for the brassier and the waist-nipper. 15 subjects (ages 30-40) were chosen by % body fat to represent various physical types. Subjects put on each garment, brassier and a waist-nipper, in turns. Measurement points in the underwear were selected according to the parts of human body. The characteristics and surface area of each garment was considered carefully when the measurement points were selected. Selected measurement points on a brassier and a waist-nipper were chosen from the anterior midsagittal line, the side-seam line, and the posterior midsagittal line. Three points on the brassier and three points on the waist-nipper were selected as the measurement points. There was a highly significant correlation between % body fat and mean garment pressure. There were no significant relationships between thickness of subcutaneous fat and mean garment pressure by measured parts.