• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.04a
• /
• pp.23-30
• /
• 1998

An estimation of seismic risk parameters by seismic zones of the Korea Peninsula in order to calculate the seismic hazard values using these was erformed. Seven seismic source zones were selected in consideration of seismicity and geology of Korean Peninsula. The seismicity parameters that should be estimated are maximum intensity, activity rate and b value in the Gutenberg - Richter relation. For computation of these parameters, least square method or maximum likelihood method is applied to the earthquake data in two ways; the one for the data without maximum intensity and the other with maximum intensity. Earthquake data since Choseon Dynasty is regarded as complete and estimation of parameters was made for these data using above two ways. And recently, a new method is published that estimate the seismicity parameters using mixed data containing large historical events and recent complete observations. Therefore, this method is applied to the whole earthquake data of the Korean Peninsula. It turns out that the b value computed considering maximum intensity is slightly lower than that computed considering without maximum intensity, and it becomes still lower when the incomplete data prior to Choseon Dynasty is used. In the case of the activity rates, the values obtained without maximum intensity and that with maximum intensity are similar, though they are lower when the incomplete data is used. The values of maximum intensities are usually lower when considering incomplete data. In the seismic source zone including the Yangsan Fault zone, however, the values are higher when considering the incomplete data.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.359-366
• /
• 1999

This paper is a study on the seismic design and test of viscoelastic dampers in regions of moderate seismicity. First moderate seismic waves are generated with measured strong seismic data based on the theory of effective peak acceleration. Then their response spectrums are compared each other to estimate the required damping to attenuate the vibration. As relatively smaller damping is required in the regions of moderate seismicity than in the regions of strong seismicity proper viscoelastic dampers can be designed according to the estimated damping. Finally a test building model is designed and the viscoelastic dampers are installed for the experimental study under moderate and strong earthquakes, It is found that viscoelastic dampers with low damping capacity developed in this study are enough to reduce the building response in regions of moderate seismicity.

• Journal of the Korean earth science society
• /
• v.21 no.2
• /
• pp.159-167
• /
• 2000

We tested the randomness and estimated the degree of concentration for the earthquake occurrence in the Korean Peninsula by using the statistical methods for spatial data. For the randomness test, we applied both of the test statistics based method and the empirical distribution based method to the both of historical and instrumental seismicity data. It was found that the earthquake occurrences for historical and instrumental seismicity data are not random and clustered rather than scattered. A nonparametric density estimation method was used to estimate the concentration degree in the Peninsula. The earthquake occurrences show relatively high concentration on Seoul, Choongnam, Chonbook and Kyungbook areas for the historical seismicity data. Also,'L" shaped concentrations connecting Whanghaedo -the coast of Choongnam -the inland of Kyungbook area are revealed for the instrumental seismicity data.

• Communications for Statistical Applications and Methods
• /
• v.8 no.2
• /
• pp.499-505
• /
• 2001

Kim and Baek (2000) tested the spatial randomness for he earthquake occurrence in the Korean Peninsula by using the nearest-neighbor test statistics and empirical distribution functions. The K-function, however, has obvious advantages over the methods used in Kim and Baek (2000), such as it does not depend on the shape of the study region and is an effective summary of spatial dependence over a wide range of scales. We applied the K-function method for testing the randomness to both of the historical and the instrumental seismicity data. It was found that he earthquake occurrences for historical and instrumental seismicity data are not random and clustered rather than scattered.

• Tunnel and Underground Space
• /
• v.19 no.3
• /
• pp.174-180
• /
• 2009

This paper gives a brief review of seismicity and seismic monitoring in surface mines. A summary of various researches related to seismicity is presented. Our research focuses on the understanding of seismicity and the application of analytical techniques to seismicity. Seismic monitoring plays an important role in the identification of potential failure planes and thereby predict potential failures. Much of the instrumentation used in our research is derived from earthquake monitoring systems. The major aspects in seismic monitoring are an instrumentation used, size of the network and data acquisition systems. Seismic monitoring in surface mines could be successfully applied to the improvement of safety standards in slope stability.

• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1255-1262
• /
• 2009

This paper introduces the status of and issues related to the PSHA (Probabilistic Seismic Hazard Analysis) of Korean Nuclear Power Plant sites. PSHA was first introduced to the nuclear industry in the mid-1980s. The Korean PSHA is based on Cornell and accommodates the modem approach for eliciting expertise and statistical treatment. Due to the low seismicity in Korea, large uncertainties exist in the PSHA database including seismic source maps, seismicity parameters of seismic sources, and attenuation formulae. Though research in seismology, geology, and earthquake engineering since the mid-1990s has significantly reduced uncertainties, a considerable amount still exists. Considering the low seismicity of the Korean Peninsula, especially the lack of strong motion data, further reduction will take several decades.

• Economic and Environmental Geology
• /
• v.11 no.2
• /
• pp.69-80
• /
• 1978

The seismicity of the Korean peninsula (2A. D.-1977) is investigated temporally and spatially to estimate seismic hazard zones in the Korean peninsula, based on macroseismic data from description of the historical literature and reported data by JMA, ERI, World Data Center-A, and ISC.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.64-71
• /
• 1999

Seismicity of the Korean Peninsula shows intraplate seismicity that has irregular pattern in both time and space. Seismic data of the Korean peninsula consists of historical earthquakes and instrumental earthquakes. In this study we devide these data into complete part and incomplete part and considering earthquake size uncertainty estimate seismic hazard parameters - activity rate λ, b value of Gutenberg-Richter relation and maximum possible earthquake IMAX by statistical method in each major tectonic provinces. These estimated values are expected to be important input parameters in probabilistic seismic hazard analysis and evaluation of design earthquake.

• Journal of the Korean Geophysical Society
• /
• v.3 no.2
• /
• pp.91-98
• /
• 2000

The seismicity of the Korean Peninsula shows a very irregular pattern of strain release typical of the intraplate seismicity. The Korean Peninsula may be divided into several tectonic provinces of differing tectonics. In this analysis, seismicity parameters for each tectonic province are evaluated from historical as well as instrumental earthquake data of the Korean Peninsula to examine the differences in seismic characteristics among tectonic provinces. Statistical analysis of the earthquake data made of incomplete data before the Choseon Dynasty and complete data afterwards reveals that there exist no significant differences in seismic characteristics between the tectonic provinces. It turns out the b-value in the intensity-frequency relation for the whole peninsula is about 0.6 and the maximum earthquake is about MMI X. The results of this study may be used in the probabilistic seismic hazard analysis of the Korean Peninsula and in estimating the design earthquake in earthquake engineering.

• Journal of the Korean Geophysical Society
• /
• v.3 no.3
• /
• pp.201-212
• /
• 2000

Recent seismicity of the central region of South Korea is investigated by using the micro-earthquake data recorded at the seismic network of KNUE(Korea National University of Education) since December, 1997. About two earthquakes are observed each month, which indicates relatively low seismic activities of the region, without showing any temporal characteristics of seismicity. The b-value of the region obtained from the data we used is found to be about 1.15. The epicenters of the micro-earthquakes are mostly located in the Okchon Zone, especially around Munkyong area, Poeun-Sokri Mt.-Youngdong area, and Kunsan-Nonsan area.