• Ocean and Polar Research
• /
• v.24 no.3
• /
• pp.249-253
• /
• 2002

There is a great deal evidence concerning crustal uplift, after deglaciation, in the vicinity of Syowa Station $(69^{\circ}S,\;39^{\circ}E)$ from tide gauge data, seismic evidence, raised beaches, marine terraces, etc. The geomorphological and tide gauge data show that the crustal uplift is going on around Syowa Station. Seismic observations at Syowa Station started in 1959. Phase readings of the earthquakes have been published by National Institute of Polar Research once a year since 1968, as one of the Data Report Series. Eighteen local earthquakes were detected on short period seismograms at Syowa Station in 1990-2000. The seismicity during the period from 1990 to 2000 was lower than that from 1987 to 1989 when epicenters of local earthquakes were determined by tripartite seismic array. Local earthquake activity corroborates the crustal uplif4 which is an intermittent phenomenon. Sea level falling of 4.5 mm/y was found using data in 1975-1992. This felling rate is consistent with the geomorphological data. A route for repeat leveling survey was established in East Ongul Island. No appreciable change of sea level was observed for the last 14 years. A dynamics of the crustal uplift around Syowa Station has been discussed using geomorphological data, ocean tide, and seismic and leveling data, which is estimated to be an intermittent phenomenon. When local seismic activity is high, the crustal uplift is estimated to be going on. On the contrary, the crustal uplift is in dormancy when the local seismicity is low. Repeated leveling measurements suggest no significant changes, which further supports the idea that the crustal uplift in offshore is not a tilt trend movement but a block movement.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.581-594
• /
• 2014

A feasibility study on the seismic design of nuclear reactor buildings with application of a seismic isolation system is introduced. After the Hyogo-ken Nanbu earthquake in Japan of 1995, seismic isolation technologies have been widely employed for commercial buildings. Having become a mature technology, seismic isolation systems can be applied to NPP facilities in areas of high seismicity. Two reactor buildings are discussed, representing the PWR and BWR buildings in Japan, and the application of seismic isolation systems is discussed. The isolation system employing rubber bearings with a lead plug positioned (LRB) is examined. Through a series of seismic response analyses using the so-named standard design earthquake motions covering the design basis earthquake motions obtained for NPP sites in Japan, the responses of the seismic isolated reactor buildings are evaluated. It is revealed that for the building structures examined herein: (1) the responses of both isolated buildings and isolating LRBs fulfill the specified design criteria; (2) the responses obtained for the isolating LRBs first reach the ultimate condition when intensity of motion is 2.0 to 2.5 times as large as that of the design-basis; and (3) the responses of isolated reactor building fall below the range of the prescribed criteria.

• Journal of the Korean Geophysical Society
• /
• v.3 no.4
• /
• pp.261-268
• /
• 2000

Minimum magnitudes $(M_c)$ for estimation of seismicity parameters were analyzed for the earthquake catalog of Korea Meteorological Agency (KMA). The temporal variation of earthquake frequency suggests that a proper $M_c$ be 3.0 for the whole southern part of the Korean Peninsula. The b-value with $M_c$ of 3.0 is estimated to be 1.11, which is larger than those of the previous studies. To see the spatial variation of $M_c$, the southern part of the peninsula were divided into grids of $0.1{\times}0.1$ degree. At the greater portion of grid points, the local earthquake catalogs do not satisfy given statistical criteria. The grid points whose local earthquake catalogs meet the criteria mostly distribute in the eastern part. $M_c$ at these points range 2.4 to 3.5 and b values range 0.75 to 1.73 with the average of 1.08 which is comparable to that for the whole southern part of the peninsula.

• Earthquakes and Structures
• /
• v.8 no.1
• /
• pp.153-184
• /
• 2015

Most damaging earthquakes come as complex sequences characterized by strong aftershocks, sometimes by foreshocks and often by multiple mainshocks. Complex earthquake sequences have enormous seismic hazard, engineering and societal implications as their impact on buildings and infrastructures may be much more severe at the end of the sequence than just after the mainshock. In this paper we examine whether historical sources can help characterizing the rare earthquake sequences of pre-instrumental times in full, including fore-, main- and aftershocks. Thanks to the its huge documentary heritage, Italy relies on one of the richest parametric earthquake catalogues worldwide. Unfortunately most current methods for assessing seismic hazard require that earthquake catalogues be declustered by removing all shocks that bear some dependency with those identified as mainshocks. We maintain that this requirement has led most modern historical seismologists to focus mainly on mainshocks rather than also on the fore- and aftershocks. To shed light onto major earthquake sequences of the past, rather than onto individual mainshocks, we investigated 10 damaging earthquake sequences ($M_w$ 4.7-7.0) that hit the L'Aquila area and central Abruzzo from the 14th to the 20th century. We find that most of the results of historical research are important for modern seismology, yet their rendering by the current parametric catalogues causes most information to be lost or not easily transferred to the potential users. For this reason we advocate a change in current strategies and the creation of a more flexible standard for storing and using all the information made available by historical seismology.

• Tunnel and Underground Space
• /
• v.32 no.3
• /
• pp.203-218
• /
• 2022

A hydro-mechanical study was performed to analyze the relationship between the magnitude of injection-induced seismicity and shut-in. In hydraulic analysis, the suspension of fluid injection makes the pore pressure gradient smaller while the pore pressure at the pressure front can reach the critical value for several hours after shut-in, which leads to the additional slip with wider area than during injection. The hydro-mechanical numerical analysis was performed to model the simplified fault system, and simulated the largest magnitude earthquake during shut-in stage. The effect of the abrupt suspension of fluid injection on the large magnitude earthquake was investigated in comparison with the continuous injection. In addition to the pore pressure distribution, it was found that the geometry of multiple faults and the stress redistribution are also important in evaluating the magnitude of the induced seismicity.

• Journal of the Korean Geophysical Society
• /
• v.1 no.1
• /
• pp.3-22
• /
• 1998

Korea boasts of abundant historical earthquake records of almost 1900 events. The epicenters and intensities of these earthquakes are determined on the basis of descriptions and felt areas of the events. It turns out that most of the earthquakes occurred on major faults or tectonic boundaries of the peninsula except for the northeastern part which had been the least disrupted by tectonic disturbances during the Mesozoic. It appears that the crustal layers of the southern and northwestern parts of the peninsula had been severely ruptured during the Mesozoic disturbances and some of the faults thus generated have been active since. The seismicity of the peninsula had been rather low from the first to the fourteenth century, but unusually high from the fifteenth to the eighteenth century, and have been rather low since. This period of unusually high seismicity of the peninsula coincides with that of the northeastern part of China, suggesting the two areas are seismologically closely connected. It appears that most of the seismicity of the peninsula results from the high stress propagating from the Himalayas where the Eurasian and Indian plates collide. The data file of Korean historical earthquakes is not yet complete and supplementary studies are under way. The main purpose of this paper is to provide the data file of Korean historical earthquakes analyzed up to date for geoscientists and engineers in need of this file.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.815-820
• /
• 2001

This paper provides an overview of the unreinforced masonry in Australian Standard, especially places the focus on a seismic code. Australia, like Korea, is a country of lower seismicity, and strengthens the code of unreinforced masonry since Newcastle earthquake of magnitude 5.6 in 1989. It is useful in establishing Korean code for unreinforced masonry to compare Australian Standard to Korean.

• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.139-142
• /
• 2001

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.222-227
• /
• 1998

• Earthquakes and Structures
• /
• v.15 no.1
• /
• pp.29-44
• /
• 2018

A ground-motion prediction equation (GMPE) for the Korean Peninsula, especially for South Korea, is developed based on synthetic ground motions generated using a ground motion model derived from instrumental records from 11 recent earthquakes of $M_L$>4.5 in Korea, including the Gyeongju earthquake of Sept. 12. 2016 ($M_L$5.8). PSAs of one standard deviation from the developed GMPE with $M_W$ 6.5 at hypocentral distances of 15 km and 25 km are compared to the design spectrum (soil condition, $S_B$) of the Korean Building Code 2016 (KBC), indicating that: (1) PSAs at short periods around 0.2 sec can be 1.5 times larger than the corresponding KBC PSA, and (2) SD's at periods longer than 2 sec do not exceed 8 cm. Although this comparison of the design spectrum with those of the GMPE developed herein intends to identify the characteristics of the scenario earthquake in a lower-seismicity region such as South Korea, it does not mean that the current design spectrum should be modified accordingly. To develop a design spectrum compatible with the Korean Peninsula, more systematic research using probabilistic seismic hazard analysis is necessary in the future.