• Geomechanics and Engineering
• /
• v.21 no.3
• /
• pp.269-277
• /
• 2020

In this study, numerical analyses were conducted to investigate the load transfer mechanisms and dynamic responses between the vertical shaft and the surrounding soil using a dynamic analysis method and a pseudo-static method (called response displacement method, RDM). Numerical solutions were verified against data from the literature. A series of parametric studies was performed with three different transient motions and various surrounding soils. The results showed that the soil stratigraphy and excitation motions significantly influenced the dynamic behavior of the vertical shaft. Maximum values of the shear force and bending moment occurred near an interface between the soil layers. In addition, deformations and load distributions of the vertical shaft were highly influenced by the amplified seismic waves on the vertical shaft constructed in multi-layered soils. Throughout the comparison results between the dynamic analysis method and the RDM, the results from the dynamic analyses showed good agreement with those from the RDM calculated by a double-cosine method.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.303-312
• /
• 2011

Analysis of high-resolution seismic profiles from the southeastern continental shelf of Korea reveals that the Holocene transgressive deposits consist of five sedimentary units characterized by retrograding or backstepping depositional arrangements. Unit I, forming a linear sediment body along the shelf margin, is an ancient beach/shoreface deposit formed during the early stage of transgression. During the transgression, the paleo-channels were backfilled with fluvial or coastal-plain sediments, forming Unit II as an incised-channel fill deposit. The near-surface sediment was reworked and eroded by shoreface erosion, forming a thin lag of sands (Unit III) on the midshelf. During the middle stage of the transgression, the shoreline may have stabilized at around 70 - 80 m below the present sea level for some period of time to allow the formation of sand ridge systems (Unit IV). Unit V in the inner shelf was deposited in an estuarine environment during the middle to late stage of transgression. Such transgressive stratigraphic architecture is controlled by a function of lateral changes in the balance among rates of relative sea-level rise, sediment input and marine processes at any given time.

• The Korean Journal of Petroleum Geology
• /
• v.6 no.1_2 s.7
• /
• pp.1-7
• /
• 1998

A multichannel seismic profile from the southwestern margin of the Ulleung Basin, East Sea, was analysed in detail to interpret the middle to late Miocene sequence stratigraphic evolution of the area. A regressive package is overlying a transgressive package which, in turn, is underlain by older uplifted and deformed sedimentary layers. A prominent condensed section separates the regressive and transgressive packages. The transgressive package is characterized by onlapping onto the underlying uplifted and deformed strata. The regressive package contains six prograding sequences composed of seismically resolvable lowstand, highstand, and transgressive systems tracts. Most of the depositional sequences comprise lowstand systems tracts consisting of basin-floor fan, slope fan, and prograding complex. Potential reservoirs in the regressive package are turbidite sands in basin-floor fans, channel-fill sands and overbank sand sheets in slope fans, and incised valley-fill sands in the shelf. The shallow marine sands in transgressive packages are another type of reservoir. Detailed sequence stratigraphic analysis, seismic data reprocessing, and 3-D seismic survey are suggested for the successful hydrocarbon exploration in the study area.

• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.349-358
• /
• 2010

For imaging complex subsurface structures such as salt dome, faults, thrust belt, and folds, seismic prestack reverse-time migration in depth domain is widely used, which is performed by the cross-correlation of shot-domain wavefield extrapolation with receiver-domain wavefield extrapolation. We apply the prestack reverse-time migration, which had been developed at KIGAM, to the seismic field data set of Block 5 in Jeju basin of Korea continental shelf in order to improve subsurface syncline stratigraphy image of the deep structures under the shot point 8km at the surface. We performed basic data processing for improving S/N ratio in the shot gathers, and constructed a velocity model from stack velocity which was calculated by the iterative velocity spectrum. The syncline structure of the stack image appears as disconnected interfaces due to the diffractions, but the result of the prestack migration shows that the syncline image is improved as seismic energy is concentrated on the geological interfaces.

• Geophysics and Geophysical Exploration
• /
• v.2 no.3
• /
• pp.149-153
• /
• 1999

The study was performed as a part of 3-D exploration project of the South Con Son basin, where Korea National Oil Co. (KNOC) and SHELL Company are performing joint operation. In the structurally complex area, seismic facies or lap-out patterns, which are usually the tools for the conventional seismic stratigraphy developed by Exxon Group (Vail et at., 1977), are not easily identifiable. Therefore, stratigraphic informations are mainly extracted from seismic attribute maps of each sequence or systems tracts, and isopach maps in correlation with the stratigraphic information from the wells. The attribute maps of the sequence or systems tract boundaries and isopach map describe the variations of paleodepositional environments. The shape of the attribute maps of the boundaries is a reasonable description of the shape of the paleodepositional surface. With other maps such as isopach and structural maps, the variations of the parasequences in the systems tracts can be projected using the surface attribute maps. The reflection intensity attribute at each sequence or system tract boundary can be related to lithology, facies or porosity distributions. The azimuth attribute of source rock sequence can be used to identify the hydrocarbon migration patterns into the prospects. The overall risks of reservoir rocks, cap rocks, structure and hydrocarbon migrations were computed using the results of the study.

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.29-37
• /
• 1999

Stratigraphic subdivision, correlation and depositional environments of Oligocene strata in the Cheju basin are studied using microfossils, wireline-log, trace elements from Geobuk-1, Okdom-1 and JDZ V-2 exploratory wells as well as seismic attributes. Application of these Integrated approaches is becoming increasingly an important tool in sedimentary and petroleum geology. The purpose of this study is to provide an integrated sequence-stratigraphic interpretation for petroleum system in the Cheju basin. During the last several years the Cheju basin has been studied for petroleum potential in terms of sequence stratigraphy. The strata assigned to be of the Early Miocene in the previous studies are reinterpreted to be of Oligocene in age. Depositional environments of these strata are also reinterpreted to have been influenced significantly by marine floodings. This interpretation is supported by the lines of evidence such as occurrences of abundant dinoflagellates and calcareous nannofossils, higher sulfur (1000-10000 ppm), TOC contents $(>1{\~}3{\%})$ and hydrogen index, and specific biomarkers such as dinostrane and $C_{30}$ 4-methyl steranes. Seismic facies, determined as a fairly continuous amplitude reflection, relatively parallel uniform strata, also provides a clue for recognizing marine transgressions during the Oligocene. Two 2nd--order stratigraphic cycles are observed in Oligocene strata based on well-log responses and the presence of microfossils. Each sequence comprises shallow marine deposits in the lower part and inner-outer neritic deposits in the upper part, thus showing a upward-deepening trend. In petroleum exploration point of view, the presence of marine strata would provide a better exploration potential for source rock and reservoir quality in the Cheju basin, offshore Korea.

• Journal of the Korean earth science society
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2012

Analysis on high-resolution seismic and core data reveals that the sedimentary strata in Gyeonggi Bay consists of four sedimentary units (Unit I-IV, from top to bottom) formed during the late Quaternary period. Unit I is interpreted as sediments of tidal flat and channel-fill deposits, formed during the Holocene transgression. Unit II is divided into shallow-marine facies unit in offshore area and channelized fluvial to estuarine facies unit in nearshore sand ridge and tidal flat. Unit III is considered as tidal flat deposits with the uppermost severely weathered and oxydized layers. This unit is composed of shallow marine sedimentary successions formed during the MIS-5 highstand. The lowermost Unit IV rests on Mesozoic basement rocks, considered as the shallow marine and shelf deposits formed before the MIS-5 lowstand.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.41-49
• /
• 2006

This paper demonstrates the feasibility of using shallow S-wave, high-resolution seismic reflection surveys to characterize geological structure and stratigraphy of basement rocks for civil engineering purposes. S-wave seismic reflections from depths less than 20 m were recorded along the top of steep readout slopes. Seismic reflection data were recorded using a standard CDP acquisition method with a 24-channel seismograph and a sledge-hammer SH-wave source. The data were acquired using a split-spread source-receiver geometry with a 2 m shot-and-receiver interval, and then were processed to enhance S/N ratio of the data, to improve resolvable power of the seismic section, and to get velocity information of the basement rock. The final seismic reflection profiles using the CDP technique has imaged surfaces as shallow as less than 1m and resolved beds as thin as 1m. The migrated reflection sections possess sufficient quality to correlate the prominent reflection events to the bedding planes and faults identified on the readout outcrops. Similar S-wave reflection surveys could also be used to produce the necessary details of a geological structure of shallow bedrocks to pinpoint optimum locations for monitor wells of civil engineering purposes.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.381-393
• /
• 2014

Seismic reflection data are integrated with fieldwork data in order to understand startigraphy, structural geology and hydrocarbon potentials of Cretaceous strata in the Mesopotamian basin, Northeastern Iraq. Cretaceous strata in the basin divided into the Qamchuqa, Kometan, Bekhme and Shiranish formations, which are composed of carbonates deposited in shallow marine environment. The geological structures in these formations are mainly recognized as thrusts, detachment folds, fault propagation folds and fault bend folds. As well, NW-SE trending fractures are regularly developed, and are horizontal or perpendicular to the structures. The distribution and frequency of fractures are related to the development of the thrusts. In terms of hydrocarbon potentials, Cretaceous strata in the basin have limited capacities for source rocks and seal rocks due to the lack of organic carbon content and the well-developed fractures, respectively. Although these carbonates have limited primary porosity, however, development of the secondary porosity derived from the fractures contributes to enhance the reservoir quality. Most important factor for the reservoir quality of Cretaceous strata seems to be the frequency and connectivity of fractures relative to locations of folds and faults. The results delineated in this study will use as reference for recognizing stratigraphy and structures of Cretaceous strata and will provide useful information on hydrocarbon potentials of Cretaceous strata in the Mesopotamian basin, NE Iraq.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.551-564
• /
• 2012

This study carried out palynological analysis and seismic interpretation to establish a stratigraphic and environmental reconstruction mainly based on fossil palynomorphs and seismic reflection data correlated with the oil exploation well (BP-1) located in the Sora Sub-basin. There were frequent environmental and floral changes due to sea level change in the Sora Sub-basin. The palynomorph assemblages found in the well sediments enabled paleoecological zonation of the well sediment sequence resulting in 4 zones: Ecozone III, Ecozone IV, Ecozone V, Ecozone VI. Index fossils among palynomorphs indicate geological ages of the units within the well ranging from Eocene to Pleistocene, and paleoenvironment varies from freshwater to inner neritic marine. Previous studies suggest that the marine deposits were slightly different in stratigraphic range from well to well. It is considered the difference is credited to geomorphological setting. This study also shows stratigraphic correlation between existing wells and BP-1 well to establishes a standard stratigraphy of the Domi Basin.