• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.863-870
• /
• 2010

We investigated geographical condition and soil characteristic of ginseng cultivation site. At all sites, crown density adjusted by 80%. and Air and soil temperature were also measured. The geographical condition vary ato all sites. and soil shows similar characteristics with typical forest soil of Korea. The results shows the Air temperature needs to be higher than $15^{\circ}C$ for seed budding at April When soil temperature reach at 8, leaf of foest ginseng starts to bud. A forest ginseng is influenced by forest type, planting type and budding rates. In the case of a seedling planting, an seeding emergence rate is high, but the rate is decreased rapidly after three years On the other hand, direct seeding shows lower seedling emergence rate, but survival rate is higher than seedling-planting.

• Plant Resources
• /
• v.8 no.3
• /
• pp.258-262
• /
• 2005

In autumn, to determine the optimal planting date and plant density of rapeseed in southern areas of Korea, Yudal variety for autumn sowing, the highest yielding variety was grown under three different planting dates and five different plant densities. Yield components such as plant height, ear length, number of seedling stand per $m^2$, number of branches and pod length were highest at the plots with Sep. 30 of planting date and 30/20 cm drilling of plant density. Yield of seed, oil and 1,000 grains weight were highest at the Sep.30 of planting date and 30/20 cm drilling of plant density. Judging from the results reported above, at optimum planting date and plant density of rapeseed seemed to be Sep.30 of planting date and 30/20cm plant density in autumn sowing.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.277-284
• /
• 1998

This study was conducted to develop m automatic pot-seedling transplanter for plant factory. The transplanter consists of a gripper, row-spacing control device, nursing tray transfer system, growing trough transfer system, and gripper moving device. The gripper picks up pot-seedling. The gripper moving device moves the gripper between nursing tray and growing-flat. Nursing trays are moved to workspace by the nursing tray transfer system. The growing trough transfer system was developed to move growing trough to workspace. The row-spacing control device was used to adjust the distance between adjacent plants traversely. The results of this study are as follows. The transplanting capacity of the developed transplanter was 7.1 seconds per cycle or 1.18 second per pot-seedling. Successful planting was 98.9% without seedlings and 95.8% with seedlings.

• Korean Journal of Plant Resources
• /
• v.33 no.1
• /
• pp.24-32
• /
• 2020

This study was aimed to establish the most effective approach for the cultivation of Veronica rotunda var. subintegra (Nakai) T.Yamaz. plants, which was expected as new ornamental plants. We conducted an experiment using plug seedlings, varied the seeding container type and seeding rate. We also varied seedling quality, planting container, soil type, and shading ratio. Seedling quality was used seedlings produced from different seeding containers and seeding rates. The seedling quality were seeding growth using 162, 200, and 288 trays, and seedings rate was used seedlings produced by sowing 1, 2, 4 and 6 seeds. As a result, 162 trays of seedlings were suitable for use in this study. Plants grown with one seed per cell in individual cells exhibited increased individual growth, but those grown with four seeds per cell exhibited better growth for the whole plant. According to seedling quality, seedlings produced in the 162 trays or with four seeds per cell showed higher growth than other seedlings. In the cultivation of V. rotunda var. subintegra (Nakai) T.Yamaz., seedling growth increased depending on container capacity for both shoot and root parts. Container material had no significant impact on seedling growth. Seedlings grew the best on horticultural substrate, and showed better growth on mixed soils with high decomposed granite content than on peatmoss.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1021-1030
• /
• 1996

The mechanism of the mulch film cutter assembly designed as an integral part of a rice transplanting device was developed for mulching cultivation of early season culture rice. This mulch film cutter assembly was directly attached to the transplanting device of the rotary type Japanese transplanter. The principle is that the knife cut a planting slit on the polyethylene film while the planting finger immediately plants seedling into the soil through the planting slit. Computer results implied that the knife of the mulch film cutter assembly can make appropriate planting slit on the polyethylene film as the planting finger effectively plants the seedlings into the paddy soil through the same planting slits.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.338-349
• /
• 2022

This study aims to investigate whether modular community planting, which entailed planting a variety of species of seedlings at high density, was more effective in restoring natural forests than the existing mature tree planting. We also investigated whether the planting density of the modular community planting facilitates growth or improves the tree layer coverage. We conducted outdoor experiments in which the samples were divided into a mature tree planting plot (control plot), where mature trees were planted at wide intervals, and a modular community planting (MCP) plot (treatment plot), where multiple seedlings were planted in high density. The MCP plot was further divided into the plot in which 3 seedlings were planted per m² and the plot of 1 seedling per m². We measured the specimens' survival rate, growth rate (tree height, crown width, and root collar diameter), and cover rate for 26 months from May 2019 and the predicted future tree height growth using the measured tree height. The survival rate and relative growth rate of the MCP were higher than those of the mature tree planting plot. The vertical coverage rate of the tree crown in the MCP exhibited complete coverage of the ground before 23 months, while the coverage rate of the mature tree planting decreased due to transplantation stress. The seedlings in the MCP, which were planted at high density, grew well and were predicted to grow higher than the mature trees in the large tree planting plot within 5 to 6.5 years after planting. It was due to multiple species, seedlings, high-density planting, and planting foundation improvements, such as soil enhancement and mulching. In other words, the seedlings planted in the MCP had a higher survival rate as their environmental adaptation after planting was better, and their early growth was also larger than the trees in the mature planting plot. The high-density mixed planting of various native species not only mitigated the inter-complementary environmental pressures but also facilitated growth by inducing competition between species. Moreover, the planting foundation improvement effectively increased the seedlings' viability and growth rate. A reduction in follow-up management costs is expected as the tree layer coverage sharply increases due to the higher planting density. In the MCP (3 seedlings per m² and 1 seedling per m²), the tree height growth was promoted with the higher planting density, and the crown width and root collar diameter tended to be larger with the lower planting density, but these differences were not statistically significant.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.5
• /
• pp.356-360
• /
• 2002

The seedlings of yacon (Polymnia sonchifolia Poeppig ＆ Endlicher), which were cuttings, plug seedling (PS), crown bud before sprouting (CBBS), crown bud after sprouting (CBAS), and divided seedling after budding (DSAB) were planted at 70$\times$50 cm planting distance on ridge; that was interow spacingintrarow spacing, and about 28,500$\pm$71 plants/ha. CBBS didn't need work and equipment to raise seedlings. PS and DSAB grew taller to 140.5 and 143.3cm, respectively, than others at 150 days after planting. In the changes of plant height, PS and DSAB showed taller than others during growth period, cuttings, CBBS, and CBAS grew rapidly in middle growth stage. Excepting main stem and petiole length, other characters were significant for seedling. Fresh weights were different among seedlings. Even though the yield of plants grown from CBAS and CBBS were lower with 34.7 and 36.4 ton/ha, respectively, than 3.6 ton/ha of DSAB; its yield index were over 95%, hence, those of plants grown from cutting and PS were lower with 73 and 87%, respectively. The ratio of tuberous roots over 200g to total tuberous roots per plant was the highest from DSAB. Most of tuberous roots were under 200g per tuberous root from cuttings. CBBS, CBAS, and DSAB are suitable to use seedlings for high yield of yacono. Yacon plant by DSAB much produced tuberous root of over 200g.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.147-151
• /
• 2003

Normal seed tubers and plug seedlings raised from stem cutting and mini-tubers ($10\pm3$ g) were planted or transplanted on August 20,2001 in bare soil or under transparent and black polyethylene film mulches to evaluate the effects of mulch material and seedling type on the growth and tuber yield of fall-grown potato (Solanum tuberosum L. cv. Dejima) in Jeju region. Total tuber number per plant was 4.6 regardless of mulch treatment, and direct planting seed potatoes resulted in the greatest tubers (5.14)/plant and followed by transplanting seedlings raised from cutting and mini-tubers (4.15 and 5.15 tubers/plant). Transparent and black polyethylene film mulches increased total tuber yield by 16 and 8%, respectively, and average tuber weight by 14 and 12%, respectively, compared with no mulch (21.16 t/ha and 72.2 g/tuber). Transplanting plug seedlings raised from cutting resulted in the greatest tuber yield, followed by transplanting plug seedlings raised from mini-tubers and direct planting seed potatoes.

• Journal of Bio-Environment Control
• /
• v.26 no.2
• /
• pp.56-63
• /
• 2017

This study was carried out to establish qualities of watermelon seedling (Citrullus lanatus) according to raising seedling period (RSP; 40, 45, 50, 55, 60, and 65 days) and was carried out to investigate growth characteristics after planting of the seedlings. In seedling qualities according to RSP, Plant height, stem diameter, leaf area of seedling with RSP 65 treatment were significantly increased. Fresh and dry weight in the above of corp showed a significant difference among the seedlings with RSP 40-45, RSP 50-60 and RSP 65 treatment, and that in of root were significantly higher in the seedlings with RSP 40, 45, 65 treatments than with other RSP treatments. S/R ratio was lower in the seedlings with RSP 40 and 45 treatments than with other RSP treatments. RSP affected to the leaf area and S/R ratio of seedling. After 11 weeks after planting of a various seedlings, except that height and node number of plant with 45 RSP treatment was lower than other RSP treatments, other growth characteristics were not significantly different amon RSP treatments. Leaf area, fresh weight, dry weight and S/R ratio were lowest in plant with RSP 65 treatment. Relative growth rate and net assimilation rate of planted watermelon tended to decrease and leaf area ratio was continuously increased until 9th week in the all treatments. The lighter and heavier fruit were produced in plants with RSP 40 and RSP 65 treatments (9.7 kg and 9.9 kg) and in RSP 50 and RSP 55 treatments (both 11.0kg), respectively. Fruit sugar contents was highest in fruit with RSP 45 treatment, and was lowest in RSP 50 and RSP 60 treatments. RSP showed a polynomial regression relation with the increment of fruit weight and the weight of harvested fruit. Considering the increment and weight of fruit, the most for RSP of watermelon seedling for planting were 50-55 days.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.217-221
• /
• 2007

To provide the basic data essential for developing varieties of broad-leaved tree, the study investigated the utmost growth requirement for the growth characteristic and biomass production in accordance with planting density of Styrax obassia. The planting density of seedling can be a significant factor in contributing growth of seedling for tree growing in general. While growth of tree according to $1m^2$ planting density of Styrax obassia showed an excellent growth in tree height and the root collar diameter from $49no./m^2$, those low planting density showed decreased tendency with tree height growth while increasing the root collar diameter growth. As similar to the growth characteristic, the biomass production showed significant and statistic difference in $49no./m^2$, showing high volume of biomass production which is $3.12{\pm}0.80g$ compare to other processing section and high figure with T/R ratio which is 1.59. The special trait of photosynthetic also showed relatively high photosynthetic rate in $49no./m^2\;and\;64no./m^2$ of Styrax obassia and as the density increase, photosynthetic efficiency decreased. The plant showed stable and physiological planting pattern, displaying the best photosynthetic rate, which was the final metabolism through reserving proper space in the growth and development environment condition. This obstacle of required space essential for growth substantially deteriorated planting and ultimately, it demonstrated lower tendency of photosynthetic rate, which is the highest level of metabolism.