• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.319-323
• /
• 2013

Red rice (Oryza sativa L.) is one of the most important weeds in most of rice cultivating area. Seed germination related experiments were done to evaluate germination percentage, emerging speed, and initial growth by seeding depth and soil moisture level. The four experiments, 1) temperature, 2) seeding depth, 3) soil moisture level, and 4) seeding position, were done with combination each other on phytotron for germination and seedling growth related experiments of redrice. The treatments levels were: 1) Temperatures were 20/15(Low), 25/20 (Mid.), $30/25{\circ}C$ (High), (day/night), 2) seeding depths were 0, 3, 6 cm, 3) soil moisture levels were 25, 35, 45, 55, 65% (VWC, %), and seeding position were furrow, ridge, ridge-top. The germination percentage and germination speed of red rice were higher and faster than Daeanbyeo in low temperature. Yoeongcheon redrice of seed germination percentage and seedling length was more vigor than Hapcheon red rice. Red rice was not germinated on 6 cm seeding depth until 11 days after seeding except high temperature treatment. Germination percentage increased with increasing soil water percentage in low temperature, however it was greatest in 45% in high soil moisture level between 25% to 65% in low temperature. Seed germination percentage and seedling length were not significantly different among the soil water level in mid- and high temperature levels. In conclusion, red rice could germinate in top soil (<6 cm) in mid- and high temperature range, so we might be control red rice by spraying herbicide after germination of red rice combined with delayed rotary cultivation.

• Korean Journal of Agricultural Science
• /
• v.46 no.2
• /
• pp.341-350
• /
• 2019

Garlic is one of the most popular seasoning bulb vegetables in Korea and is the most commonly used food ingredient. However, the cultivation areas are decreasing every year as the price drops due to imported garlic, and labor is insufficient to produce garlic by conventional methods. Cultivation requires various tasks until garlic is harvested. Seeding is one of the important and laborious tasks; thus, mechanization is necessary. When seeding garlic, the sprout should face upwards; otherwise, it may rot or produce poor quality garlic. This study investigated the extent of growth of northern- and southern-type garlic in eight different positions. The results show when the roots were not planted properly, the stems were weak, and the garlic bulbs were small. A simple garlic planter was manufactured with a crank-press mechanism to plant garlic in an upright position. Using this machine, a three-fold experiment was carried out with 100 strips of garlic. The test results showed that 99.4% of the planted garlic strips were positioned upright or close to being upright, and 0.6% failed to take root. An image processing algorithm was developed to locate the root part of the garlic, and the result showed a success rate of 81%. A future study will develop an automatic garlic upright planting system with a viewing system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.123-130
• /
• 1996

Experiments were conducted to effect of seeding rates and growth regulator (KIM-112) application on lodging resistance and yield in direct seeding on flooded paddy surface. The number of seedlings per $m^2$ were ranged from 61 to 143, and seedling ratios were from 71.7 to 76.1％. The culm length was increased with the higher seeding rates. The culm length was significantly shortened by KIM-112 application, and the shortened effect of internodes were various with application times. The leaf angles with the culm and top leaves were errected and position of light reception by KIM-112 application, also the weight of culm base was increased. The bending moment at breaking of culm and culm diameter were decreased according to the higher seeding rates. The number of panicles per $m^2$ were increased according to the higher seeding rates. The ripened grain rate and 1, 000 grains weight became higher than the untreated control.

• Journal of Biosystems Engineering
• /
• v.32 no.3
• /
• pp.179-189
• /
• 2007

Most of the seeds of cucurbitaceous rootstock species used for grafting were mainly sown by hand. This study was carried out to develop an on-line discriminating algorithm of seed direction using machine vision and an automatic seeding system. The seeding system was composed of a supplying device, feeding device, machine vision system, reversing device, seeding device and system control section. Machine vision was composed of a color CCD camera, frame grabber, image inspection chamber, lighting and personal computer. The seed image was segmented into a region of seed part and background part using thresholding technique in which H value of HSI color coordinate system. A seed direction was discriminated by comparing position between the center of circumscribed rectangle to a seed and the center of seed image. It took about 49ms to identify and redirect seed. Line-up status of seed was good the more than 95% of a sowed seed. Seeding capacity of this system was shown to be 10,140 grains per hour, which is three times faster than that of a typical worker.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.223-230
• /
• 1982

To obtain the information on the germination and initial growth of the sesame, the seed of 6 sesame cultivars obtained from upper and lower position of plants were seeded and the results on the germination and initial growth were summarized as follows; 1. When the seeding time was delayed, the days to flower of all sesame cultivars were significantly decreased. And the shortening rate of days to flower by delaying seeding time showed significant differences among the sesame cultivars. 2. At all cultivars excluding IS 103, the germination percentage of the seeds obtained from lower position of sesame plant was significantly higher than those from upper position. 3. Germination percentage of IS 103 seeds from lower position of sesame plant was 20.0% at petri dish experiment and 75.0% at pot experiment and those from upper position of the stem was 17.0% at petri dish experiment and 72.5% at pot experiment, respectively. 4. The germination speed of all cultivars showed a same tendency as germination percentage, but the germination speed of cultivars at pot experiment was higher than those at petri dish experiment. 5. The sesame seedlings from lower position seed were increased in stem length, root length, leaf length and fresh weight than those from upper position seed. The germination percentage and the initial growth showed significant differences by the seed weight in same cultivar, however did not show any varietal differences.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.2
• /
• pp.185-191
• /
• 1981

The purpose of this paper is to define and describe a series of growth stages for maize. cv. MTC-l (early) and Suweon No. 19 (late) that are easily identifiable by both professional agronomists and farmers. Plants were grown at a density of 60cm row with plant spacing of 15cm at six different seeding times in 1980. Leaf development indices with ten grades (LDI) were identified and defined in accordance with the development of a leaf blade. Leaf appearance rate (LAR) was ca. 3 days and it was not influenced by the variety or seeding time. The elongation of the first internode above the ground level began in a month after emergence and it corresponded to the 8th or 9th leaf stage. Internodes elongated in regular sequence of node position. The morphological change of silks related closely with the development of kernel. The duration of generative development was not influenced by varieties and seeding time but that of vegetative growth was influenced. A new scheme for the maize which was made by the developed leaves, visible nodes above ground level, morphological change of silks and development of kernel was proposed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.68-76
• /
• 1989

The effect of characteristic of mixture sowing combination on the development of botanical composition was conducted for 12 years on the meadow experiment. The results of this study were summarized as follows. 1. Festuca pratensis lost the expected position of a dominant species. Its vegetation ratio decreased gradually until the last survey year. 2. Arrhenatherum elatius, known as a typical 2-cutting grasss, developed to a dominant species only in the 3- cutting plot without limitation. 3. Alopecurus pratensis, whose feeding value diminishes rapidly, developed to a dominant species regardless of N-fertilization under the condition of 3-cutting, even though the same small amount of seeding was introduced as usual. 4. Trisetum flavescens which causes calcinose exceeded the 40% of vegetation ratio which was the approved rate for feeding at the high N-level (2OOKgIha). 5. Among the introduced, the species showed the significance in quantity were Lotus corniculafus solely in the 2-cutting plot, and Trifolium repens solely in the 3-cutting plot. In the 3-cutting plot legume yet remained under N-fertilization. 6. The appropriate ratio of vegetation for the subordinate species in the mixture sowing combination was easily attained from the least amount of seeding (Gramineae with max. 3Kg/ha, Leguminosae with max. 2kgIha). 7. Into the mixture sowing combination, infiltrated unintroduced species marked more noticeably in the 2- cutting plot than in the 3-cutting plot.

• Journal of Biosystems Engineering
• /
• v.27 no.2
• /
• pp.143-150
• /
• 2002

Several researches for site-specific weed control have tried to increase accuracy of weed detection with machine vision technique. However, there is a problem which needs substantial time to perform site-specific spraying. Therefore, new technology for real-time precision spraying system is needed. This research was executed to develope the new technology to estimate weed density and size in real time, and to conduct a real-time site-specific spraying. It would effectively reduce herbicide amounts applied for a crop field. The real-time precision spraying system consisted of a Differential Global Positioning System (DGPS) with an error of 2 cm, a machine vision system, a geomagnetic sensor for correction of view point of CCD camera and an automatic sprayer with separately controlled nozzle. The weed density was calculated with comparison between position information and a pre-designed electronic map. The position information was obtained in real time using the DGPS and the machine vision. The electronic map contained a position database of crops automatically constructed when seeding. The developed system was tested on an experimental field of Seoul National University. Success rate of the spraying was about 61%.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.156-156
• /
• 2017

Most crop damages have been occurred by vermin(e.g., wild birds and herbivores) during the period between seeding and the cotyledon level. In this study, to minimize the damage by vermin and acquire the benefits such as protection against weeds and maintenance of water content in soil, immediately vinyl mulching after seeding was devised. Vinyl mulching has been generally covered with black color vinyl, that crop seeding locations cannot be detected by visible light range. Before punching vinyl, non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. For this study, the spline method was relatively faster than the other polynomial interpolation methods, because it has a lower maximum order of formulation when using a system such as the tridiagonal linear equation system which provided the capability of real-time processing. The temperature distribution corresponding to the distance between the crops was 10 cm, and the more clearly the leaf pattern of the crop was visually confirmed. The frequency difference was decreased, as the number of overlapped pixels was increased. Also the wave pattern of points where the crops were recognized were reduced.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.117-125
• /
• 2017

Purpose: Damage to pulse crops by wild birds is a serious problem. The damage is to such an extent that the rate of damage during the period between seeding and cotyledon stages reaches 54.6% on an average. In this study, a crop-position detection method was developed wherein infrared (IR) sensors were used to determine the cotyledon position under a vinyl mulch. Methods: IR sensors that helped measure the temperature were used to locate the cotyledons below the vinyl mulch. A single IR sensor module was installed at three locations of the crops (peanut, red lettuce, and crown daisy) in the cotyledon stage. The representative thermal response of a $16{\times}4$ pixel area was detected using this sensor in the case where the distance from the target was 25 cm. A spatial image was applied to the two-dimensional temperature distribution using a non-integral moving-average method. The collected data were first processed by taking the moving average via interpolation to determine the frame where the variance was the lowest for a resolution unit of 1.02 cm. Results: The temperature distribution was plotted corresponding to a distance of 10 cm between the crops. A clear leaf pattern of the crop was visually confirmed. However, the temperature distribution after the normalization was unclear. The image conversion and frequency-conversion graphs were obtained based on the moving average by averaging the points corresponding to a frequency of 40 Hz for 8 pixels. The most optimized resolutions at locations 1, 2, and 3 were found on 3.4, 4.1, and 5.6 Pixels, respectively. Conclusions: In this study, to solve the problem of damage caused by birds to crops in the cotyledon stage after seeding, the vinyl mulch is punched after seeding. The crops in the cotyledon stage could be accurately located using the proposed method. By conducting the experiments using the single IR sensor and a sliding mechanical device with the help of a non-integral interpolation method, the crops in the cotyledon stage could be precisely located.