• Korean Journal of Materials Research
• /
• v.17 no.1
• /
• pp.18-24
• /
• 2007

Mullite-PSZ composite was prepared by sol-gel method using $Al(sec-OC_4H_9)_3,\;Si(OC_2H_5)_4,\;ZrOCl_2\;8H_2O\;and\;Y_2O_3$. The sinterability ana mechanical properties of powder compacts sintered at $1,650^{\circ}C$ for 4 hrs were investigated for various PSZ contents. In result Al-Si spinel formed at $980^{\circ}C$ from amorphous dried gel, and zirconia as well as mullite crystal formed above $1,200^{\circ}C$. The sintered body was densified to $97{\sim}98%$ except the specimen containing 25vol% PSZ which showed the relative density of about 95% obtained by sintering at $1,650^{\circ}C$ for 4 h. The flexural strength of the sintered body was a maximum value of 290 MPa in 20 vol% PSZ, which was also considerably larger than the value of 200 MPa without PSZ. The value of the fracture toughness increased linearly with increase of PSZ content and showed a maximum value of $4.3MPam^{1/2}$ in 25 vol% PSZ, Namely this value was remarkably larger than the $value(2.6MPam^{1/2})$ of pure mullite without PSZ.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.2
• /
• pp.185-191
• /
• 1981

The purpose of this paper is to define and describe a series of growth stages for maize. cv. MTC-l (early) and Suweon No. 19 (late) that are easily identifiable by both professional agronomists and farmers. Plants were grown at a density of 60cm row with plant spacing of 15cm at six different seeding times in 1980. Leaf development indices with ten grades (LDI) were identified and defined in accordance with the development of a leaf blade. Leaf appearance rate (LAR) was ca. 3 days and it was not influenced by the variety or seeding time. The elongation of the first internode above the ground level began in a month after emergence and it corresponded to the 8th or 9th leaf stage. Internodes elongated in regular sequence of node position. The morphological change of silks related closely with the development of kernel. The duration of generative development was not influenced by varieties and seeding time but that of vegetative growth was influenced. A new scheme for the maize which was made by the developed leaves, visible nodes above ground level, morphological change of silks and development of kernel was proposed.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.5
• /
• pp.372-379
• /
• 2013

The present study was investigated the effect of planting density on plant growth and yield of Panax ginseng C. A. Meyer. Sowing density is one of the most important factors affecting yield. The value of roots have affected by shape, color, weight and degree of disease injury in ginseng. Also, it needed to minimize elapsed time for 5 years including pre-planting field management and cultivation period. We were conducted to evaluate that planting densities and varieties on the growth, yield and missing rate. The direct sowing was treated seeds density as a four levels (seeds; 72, 90, 120, 144) and 10 different varieties with 3 years old ginseng roots. Root weight was significantly affected by planting density and variety, but the number of lateral root and yield were affected by only planting density. Growth index was related to variety and planting density. Also, Root shape index was affected by both varieties and planting densities. Suitable planting density and variety were 120 plant per 1.62 $m^2$ and Gopoong, respectively. Results showed that it was also a significant difference (p=5%) in variety of planting density on growth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.38-43
• /
• 1998

This study examined root growth and distribution under the direct seeding of rice cultivars developed in Korea, Japan, and the U.S. Cultivars from the U.S., especially 'M202' and 'Caloro', had a high ratio of the dry matter partitioning for root and top plant components. Caloro had high root and top growth. 'Koshihikari' from Japan showed the lowest ratio of R/T (root/total dry matter) due to the small amount of root and top plant growth. Most Japanese cultivars except transplanted 'Hatsuboshi' showed low ratio of R/T. Patterns of root distribution for each soil block were recorded by the root box-pin board method. Roots of all cultivars were distributed in blocks A, C, and E in the middle of box, i.e., just below the plant base. Roots of 'Dongjin', M202, and Caloro were distributed deeper than the others. Roots of transplanted Hatsuboshi developed much better than direct seeded Hatsuboshi. Total root weight density was highest in Caloro followed by Dongjin, 'Gancheok', 'Calrose', and the others. The root density of Caloro was twice as much as those of the others except Dongjin. According to cumulative percentages of root distribution on each soil layer, roots of most cultivars were distributed below 20cm. The U.S. cultivars showed vertically well developed root systems as compared to others. A large amount of roots were distributed in the top 15cm of soil layer for Hatsuboshi and Koshinikari, and their root systems appeared to be shallow. In contrast, the rates of root distribution in the top 10cm of soil layer were low for Dongjin, Calrose, and Caloro. These cultivars had relatively deep root systems.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.2
• /
• pp.114-125
• /
• 2002

This study was designed to evaluate the influence of fibroblasts or connective tissue from mouse oral mucosa on differentiation of neonatal mouse calvaria-derived osteoblasts and mineralization of bone nodules. Primary cell cultures from mouse calvarial osteoblasts and 2-4 passaged fibroblasts from oral mucosa were co-cultured in monolayer cultures, devided into 6 experimental group according to cell density or cell confluency. Osteoblasts were also co-cultured with fibroblasts in $Transwell^{(R)}$ culture plate with different co-cultured period according to osteoblast differentiation. The alkaline phosphatase activity were measured in monolayer cultures and cultures using $Transwell^{(R)}$. The mineralized bone nodules were presented by Von Kossa staining and density of mineralized nodules was measured by image analysis. The connective tissues with or without osteoblast seeding were cultured and examined histologically by Von Kossa and Trichrome Goldner staining. The results were as follows; 1. Prolonged maturation of matrix and delayed mineralization of bone nodules were resulted in monolayer cultures. 2. Co-culture of fibroblast with osteoblast using $Transwell^{(R)}$ during osteoblast proliferation stage stimulated proliferation of osteoblasts and increased alkaline phosphatase activity and mineralization of bone nodules. 3. Co-culture of fibroblast with osteoblast using $Transwell^{(R)}$ during matrix mineralization stage decreased and delayed mineralization of bone nodules. 4. In vitro cultured connective tissue with osteoblast seeding resulted in proliferation of osteoblasts and matrix formation with mineralization.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.482-488
• /
• 1995

The phase transformation temperature from $\theta$- to $\alpha$-alumina was lowered from 1214$^{\circ}C$ to 114$0^{\circ}C$ in DSC by treating ${\gamma}$-alumina obtained by calcination of boehmite at $700^{\circ}C$ for 2hrswith $\alpha$-Al2O3 seeds (d50=0.36${\mu}{\textrm}{m}$) and 3wt% of the alumina sol. $\alpha$-Al2O3 seeds seemed to lower to the transformation temperature and the alumina sol suppressed the high temperature agglormeration. The effect was increased as the amount of the sol was increased, which was supported by TEM and particle size distribution. For an example, spherical ${\gamma}$-alumina powder with d50=0.54${\mu}{\textrm}{m}$ was prepared by treating the ${\gamma}$-alumina with 9 wt% of the alumina sol and 3wt% of the $\alpha$-Al2O3. It sintered to 99% of the theoretical density at 150$0^{\circ}C$ for 2hrs. and it had relatively homogeneous microstructure with 2~3${\mu}{\textrm}{m}$ sized grains.

• Korean journal of applied entomology
• /
• v.19 no.1 s.42
• /
• pp.31-34
• /
• 1980

In pot experiment, relations between soybean cyst nematode, Heterodera glycines, and growth and yield of soybean were followed. Soybean growth and nodule development in plots which inoculated more than 16 cysts were reduced greatly from two month after inoculation. Tolerance limit was about 20 cysts per 500g of soil at seeding period. There was $60\%$ loss of grain yield 낀hen nematode population was 1 cyst/g of soil at seeding period. Reproduction of soybean cyst :nematode was good when initial population had been low. So, the final population was no difference depend on inoculation density.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.8-15
• /
• 2006

The size of the superconducting domains and the critical current density inside these domains have to be enhanced for most of cryomagnetic applications of melt-textured YBCO bulks. To enlarge the size of the domains we studied the multi-seeding technique based on a well-established procedure for preparing high quality YBCO monoliths using self-made SmBCO seeds. The distance between the seeds was optimised as a result of the investigation of the effects of various seed distances on the characteristics of the grain boundary Junctions. The influences of a-b plane intersections and c-axis misalignments were researched. Thereby, a small range of tolerance of the misorientations between the seed crystals was found. Field mapping was applied to control the materials quality and the superconductor's grain structure was investigated using polarisation microscopy. YBCO function elements with iou. seeds in a line and an arrangement of making type (100)/(100) and (110)/(110) boundary junctions, respectively, were processed. The trapped field profile in both sample types shows single domain behaviour. To demonstrate the potential of the multi-seeding method a ring-shaped sample was processed by placing sixteen seeds in a way to make both (100)/(100) and (110)/(110) grain junctions at the same time. The results up to now are very promising to prepare large single domain melt-textured YBCO semi-finished products in complex shapes.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.355-361
• /
• 2022

In order to produce model ice sheets having targeted physical properties in accordance with the law of similitude, the ice model basin of Korea Research Institute of Ships and Ocean Engineering carries out a series of processes such as cooling, seeding, freezing, and tempering. Performance in ice field of ice going ships or marine structures is evaluated from model tests in ice conditions made out of a model ice sheet such as level ice, pack ice, brash ice, and ice rubble field, etc. In this study, we investigated effects of micro-bubble layers and seeding of ice nuclei included in the process generating a model ice sheet on change in physical properties of thickness, density, and flexural strength.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.10
• /
• pp.1749-1759
• /
• 2018

Recombinant (rec) prion protein (PrP) is an extremely useful resource for studying protein misfolding and subsequent protein aggregation events. Here, we report mass production of high-purity rec-polypeptide encoding the C-terminal globular domain of PrP; (90-230) for human and (89-231) for murine PrP. These proteins were expressed as His-tagged fusion proteins in E. coli cultured by a high cell-density aerobic fermentation method. RecPrPs recovered from inclusion bodies were slowly refolded under reducing conditions. Purification was performed by a sequence of metal-affinity, cation-exchange, and reverse-phase chromatography. The current procedure yielded several dozens of milligrams of recPrP per liter with >95% purity. The purified recPrPs predominantly adopted an ${\alpha}$-helix-rich conformation and were functionally sufficient as substrates to measure the seeding activity of human and animal prions. Establishment of a procedure for high-level production of high-purity recPrP supports the advancement of in vitro investigations of PrP including diagnosis for prion diseases.