• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.2
• /
• pp.208-213
• /
• 2007

The objective of the experiment was to determine the optimum cultural [moisture levels (55, 60 and 70%), days of fermentation (7, 14 and 21), temperature (25 and $35^{\circ}C$) of incubation)] and nutritional parameters (urea addition (0 and 2%) and variable levels of single super phosphate (0.25 and 0.50% SSP)) for bio-processing of the mustard (Brassica campestris) straw (MS) under solid-state fermentation (SSF) system. The performance of SSF was assessed in terms of favorable changes in cell wall constituents, protein content and in vitro DM digestibility of the MS. Sorghum based inoculum (seed culture) of Ganoderma lucidum to treat the MS was prepared. The 50 g DM of MS taken in autoclavable polypropylene bags was mixed with a pre-calculated amount of water and the particular nutrient in the straw to attained the desired levels of water and nutrient concentration in the substrate. A significant progressive increase in biodegradation of DM (p<0.001), NDF (p<0.01) and ADF (p<0.05) was observed with increasing levels of moisture. Among the cell wall constituents the loss of ADF fraction was greatest compared to that of NDF. The loss of DM increased progressively as the fermentation proceeded and maximum DM losses occurred at 28 days after incubation. The protein content of the treated MS samples increased linearly up to the day $21^{th}$ of the incubation and thereafter declined at day $28^{th}$, whereas the improvement in in vitro DM digestibility were apparent only up to the day $14^{th}$ of the incubation under SSF and there after it declined. The acid detergent lignin (ADL) degradation was slower during the first 7 days of SSF and thereafter increased progressively and maximum ADL losses were observed at the day $28^{th}$ of the SSF. The biodegradation of DM and ADL was not affected by the variation in incubation temperature. Addition of urea was found to have inhibitory effect on fungal growth. The effect of both the levels (0.25 and 0.50) of SSP addition in the substrate, on DM, NDF, ADF, cellulose and ADL biodegradation was similar. Similarly, the protein content and the in vitro DM digestibility remain unaffected affected due to variable levels of the SSP inclusion in the substrate. From the results it may be concluded that the incubation of MS with 60 percent moisture for 21 days at $35^{\circ}C$ with 0.25 percent SSP was most suitable for MS treatment with Ganoderma lucidum. Maximum delignification, enrichment in the protein content and improvement in in vitro DM digestibility were achieved by adopting this protocol of bioprocessing of MS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.123-137
• /
• 2015

This study was carried out to investigate the effect of pre-germination soaking on germination in 90 Korean soybean varieties and identification of protein in seeds of 7 soybean varieties. The results obtained that germination rate of soybean seeds was decreased as amount of soaking water and soaking duration in number of days. Difference in germination rate of soybean seeds was significant at three days soaking with water volume of 90 ml. Water absorption of seeds was rapidly increased during the first 6 hours, followed by slow increase until 24 hours and then decreased 24 to 48 hours after soaking soybean varieties for bean sprout soaked the lowest amount of water, while soybean varieties for cooking with rice showed the lowest seed water content. Dissolved oxygen (DO) in soaking water was rapidly decreased during the first 3 hours after soaking, and then slowly decreased. Soybean varieties for vegetable and early maturity showed the lowest DO during early soaking periods, but showed higher DO after 24 hours than other groups of soybean varieties. Electrical conductivity and Total Dissolved Solid (TDS) were increased as number of soaking days increased. Soybean varieties for vegetable and early maturity showed the highest electrical conductivity and TDS, followed by those for sauce and paste or cooking with rice, while showed the lowest electrical conductivity and TDS, varieties for bean sprout. Among 90 Korean soybean varieties, varieties which showed the highest germination rate were Jangsu-kong for sauce and paste, Sobaegnamul-kong for bean sprout, Seonheuk-kong for cooking with rice, Seunnokkong for vegetable and early maturity. On the ather hand varieties which showed the lowest germination rate were Iksan and Songhak-kong for sauce and paste, Pangsa-kong for bean sprout, Jinyeul-kong for cooking with rice, Sinlok-kong for vegetable and early maturity. Germination rates of soybean seeds were higher when electrical conductivity, TDS and water absorption of seeds were lower. There were negative correlations between electrical conductivity, TDS and water absorption of seeds and germination rate, while there were positive correlations among electrical conductivity, TDS and soybean seed weight.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.94-103
• /
• 2023

Cyanobacterial resting cells, such as akinetes, are important seed cells for cyanobacteria's early development and bloom. Due to their importance, various methods have been attempted to isolate resting cells present in the sediment. Ludox is a solution mainly used for cell separation in marine sediments, but finding an accurate method for use in freshwater is difficult. This study compared the two most commonly used Ludox methods (direct sediment treatment and sediment distilled water suspension treatment). Furthermore, we proposed a highly efficient method for isolating cyanobacterial resting cells and eDNA amplification from freshwater sediments. Most of the resting cells found in the sediment were akinete to the Nostocale and were similar to those of Dolichospermum, Cylindrospermum, and Aphanizomenon. Twenty times more akinetes were found in the conical tube column using the sediment that had no treatment than in the sample treated by suspending the sediment in distilled water. Akinete separated through Ludox were mainly spread over the upper and lower layers in the column rather than concentrated at a specific depth in the column layer. The mibC, Geo, and 16S rDNA genes were successfully amplified using the sediment directly in the sample. However, the amplification products of all genes were not found in the sample in which the sediment was suspended in distilled water. Therefore, 5 g to 10 g of sediment is used without pretreatment when isolating cyanobacterial resting cells from freshwater sediment. Cell isolation and gene amplification efficiency are high when four times the volume of Ludox is added. The Ludox treatment method presented in this study isolates cyanobacterial resting cells in freshwater sediment, and the same efficiency may not appear in other biotas. Therefore, to apply Ludox to the separation of other biotas, it is necessary to conduct a pre-experiment to determine the sediment pretreatment method and the water layer where the target organism exists.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.5
• /
• pp.295-303
• /
• 1997

To investigate the response on feeder cell cultures, protoplasts isolated from cell suspensions initiated from mature seed scutellum-derived callus of the Japonica rice variety Taipei 309, were cultured on filter membranes under various conditions. The effects of various factors, such as gelling agents, feeder cell and protoplast densities, species of feeder cells and heat shock treatment, have been investigated to improve protoplast plating efficiencies on filter membranes. Maximum protoplast plating efficiencies were obtained when protoplasts were cultured on KPR medium semi-solidified with Sea Plaque agarose at a density of $5\;\times\;10^{5}\;ml^{-1}$ protoplasts in the presence of Lolium multiflorum as feeder cells (0.5 ml pcv per 10 ml of protoplast culture medium). Pre-culture heat shock treatments for 1 min. and 5 min. to the protoplasts did not give any appreciable increase on the plating efficiency of protoplasts in the presence of feeder cells. Maltose-supplemented medium was superior for plant regeneration from protoplast-derived colonies compared with medium containing only sucrose. The plants were transferred to the glasshouse, flowered and were fertile.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.235-243
• /
• 2014

This research was conducted to investigate the influence of leaching fractions (LF) in each irrigation or fertigation on plant growth and changes in chemical properties of root media during the production of seedling grafts of tomato. Two root media containing Sphagnum peat moss plus vermiculite (5:5, v/v, PV) and coir dust plus vermiculite (5:5, v/v, CV) were formulated and pre-planting fertilizers were incorporated during formulation. Then, each medium was packed into 50 cell (volume 33 cc) and 105 cell (volume 18 cc) trays and the rootstock (cv. J3B Strong) and scion (cv. Sunmyung) were grown, respectively. The seedlings were grafted at 31 days after sowing and then the cut seedling grafts (Sunmyung scion/J3B Strong rootstock) were planted into 50 cell plug trays containing each of the two root media. After induction of the graft union and new adventitious roots for 7 days, the seedling grafts were fed with fertilizer solution once a week containing 4 different N concentrations (0, 50, 100, $200mg{\cdot}L^{-1}$). When determined after 31 days from seed sowing, the highest fresh weights of the root stock seedlings were obtained with 0.75 LF in PV (8.96g/seedling) and CV (7.11g/seedling) mixes. The EC of the both mixes were 0.93 and $1.09dS{\cdot}m^{-1}$, respectively. The fresh weights of the scion seedlings 31 days after seed sowing were 4.29g with 0.50 LF in the PV and 3.13g with 0.50 LF in the CV. The root medium ECs of the two treatments were 0.76 and $1.34dS{\cdot}m^{-1}$, respectively. Fresh weights of the seedling grafts grown for 31 days were greatly influenced by post-planting fertilizer concentrations. The heavier plants were obtained in $100mg{\cdot}L^{-1}$ N treatment than any other treatments in same mixes. The substrate ECs in these two treatments were 0.98 and $1.93dS{\cdot}m^{-1}$, respectively, indicating that the desirable range of soluble salts in soil extracts is higher in the CV mix than the PV mix. Results of this study suggest that optimum EC range is different in each medium and LF need to be adjusted differently for each root medium to produce high quality seedling grafts of tomato.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.865-874
• /
• 2003

Red sorrel, as one of exotic weeds in Korea, was introduced along with imported cereals for concentrate feed or within the seed for forage production. The plant was dominated in grassland and reduced the quality of forage. In particular, this weed cause severe problem in alpine grassland. This study was carried out to investigate the effect and response of red sorrel and forage crops by foliar and soil applied herbicide application. Mecoprop(MCPP) and pendimethaline were selected by pre-field experiment trials and applied to control the red sorrel in grassland. Herbicidal activity of MCPP was 77.2% at 500$m\ell$/10a level and 82.8% at 750$m\ell$/10a level. However, seeds of red sorrel from bare land formed after foliar applied herbicide treatment were germinated and covered bare land. Pendimethalin was not reduced the rhizome growth grown from red sorrel root but retarded seedling growth of germinated red sorrel. The herbicidal activity of pendimethalin to the red sorrel seedling was 83.0%. 2 times application of MCPP at the rate of 750$m\ell$/10a was effective to control of red sorrel regrown from root and herbicidal activity was 93.2%. MCPP and pendimethaline treatment was not reduced growth of grass and have no herbicidal injury to forage crop seedling. Amount of MCPP and pendimethalin remained in grass plant was decreased from 20 days after herbicide treatment and could not be problem in livestock feeding.

• Journal of fish pathology
• /
• v.20 no.1
• /
• pp.41-47
• /
• 2007

To investigate the cause of the mass mortality during rockbream, Oplegnathus fasciatus seed production, the water quality and bacterial counts of sea water in breeding tanks was measured 20days post the hatch. During breeding of rockbream fry, the environmental factors of water quality were detected as pH, ammonia COD, phosphate at the supply of the food organisms and the seawater. pH was decreased from the 8.21 of the 1 day per hatch (dph) to 7.56 of the on the 7 dph. Ammonia was conversely increased 0.49 ppm of the 1 dph to 0.85 ppm of 10 dph. As the adding of the chlorella and the rotifer tanks, COD was increased the 3.3 times and 1.2 times than those of pre-adding respectively. The phosphate and the ammonia were also increased 1.7 and 2.3 times, with adding the chlorella respectively, which exceeded the second grade for sea water evaluation level, 0.015 ppm and 0.1 ppm respectively. Water quality was not improved by PSB (Photosynthetic Bacteria) treatment, which increased the value of COD in 1.7 times, phosphate in 2.7 times and ammonia in 1.4 times. The number of the bacteria was also increased along the dph. According to the treatment of chlorella, the number of total bacteria increased in 1.4 times and those of Vibrio sp. 1.6 times. The lethal concentration of ammonia was investigated that over than 10 ppm could killed the fry of rockbream within 28 hrs, but 40% in 2 ppm.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.