• 방사선산업학회지
• /
• 제17권2호
• /
• pp.199-207
• /
• 2023

Since seeds can be directly used as food resources as well as for crop cultivation or preservation of genetic resources, it is essential to develop high-quality seed processing technology to increase agricultural productivity. Seed treatment means processing technologies of seeds through physical or chemical treatment processes from after harvesting seeds to before sowing of seeds to improve germination and growth rate, durability, and immunity, etc. Since chemical seed treatment technology using pesticides or plant growth regulators has problems of environmental pollution and human toxicity, it is desired to develop an alternative technology. As a physical seed treatment method, various technologies such as ionizing radiation, plasma, microwave, and magnetic field are being developed, and some of them are being used practically. In this paper, I will summarize the mechanism of seed priming and disinfection, and the advantages and disadvantages of application, focusing on these physical seed treatment methods. Low dose or moderate intensity ionizing radiation, microwave, low-temperature plasma, and magnetic field treatments often promoted seed germination and seedling growth. However, effective removal of direct seed pathogens at these treatment intensities appears to be difficult. And it has been shown that relatively high-dose electron beam treatment using low-energy electron beams kills microorganisms on the seed surface and hull layer while not damaging the inner tissue of the seed, and is also effectively used for seed treatment on a commercial scale. In order to put the physical seed treatment technology to practical use in Korea, it is necessary to develop an economical scale treatment device along with the development of individual treatment technology to each crop.

• 한국작물학회지
• /
• 제42권6호
• /
• pp.821-832
• /
• 1997

본 실험은 알파파 꽃 추출물로부터 Allelopathy와 Autotoxicity에 관련되는 활성물질을 분리, 동정하기 위하여 실시하였다. 알팔파 꽃 200g을 80% MeOH로 추출하여 $CHCl_3$층을 silica gel thin layer chromatography (TLC), microcrystalline cellulose thin layer chromatography (MCTLC)와 droplet countercurrent chromatography(DCCC)의 분획을 이용하여 생물검정을 행하고 DCCC의 생물검정에서 가장 억제력을 보였던 분획 5와 6은 HPLC로 활성물질을 동정하였다. HPLC분석 결과 분획 5에서는 ferulic acid, caffeic acid, vanillic acid, rutin, narringin 이, 분획 6에서는 ferulic acid, caffeic acid, vanillic acid, rutin, coumarin이 동정되었다. 이들 동정된 물질을 이용한 알팔파와 돌피에 대한 발아실험에서도 모두 알팔파와 돌피의 발아와 생육에 억제적으로 작용하였으며, 이중 coumarin의 처리가 가장 억제적이었다. 따라서 이들 물질이 알팔파와 돌피의 autotoxicity와 allelopathy에 관련하는 것으로 생각되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.252.2-252.2
• /
• 2013

ZnO nanostructures have a lot of interest for decades due to its varied applications such as light-emitting devices, power generators, solar cells, and sensing devices etc. To get the high performance of these devices, the factors of nanostructure geometry, spacing, and alignment are important. So, Patterning of vertically- aligned ZnO nanowires are currently attractive. However, many of ZnO nanowire or nanorod fabrication methods are needs high temperature, such vapor phase transport process, metal-organic chemical vapor deposition (MOCVD), metal-organic vapor phase epitaxy, thermal evaporation, pulse laser deposition and thermal chemical vapor deposition. While hydrothermal process has great advantages-low temperature (less than $100^{\circ}C$), simple steps, short time consuming, without catalyst, and relatively ease to control than as mentioned various methods. In this work, we investigate the dependence of ZnO nanowire alignment and morphology on si substrate using of nanosphere template with various precursor concentration and components via hydrothermal process. The brief experimental scheme is as follow. First synthesized ZnO seed solution was spun coated on to cleaned Si substrate, and then annealed $350^{\circ}C$ for 1h in the furnace. Second, 200nm sized close-packed nanospheres were formed on the seed layer-coated substrate by using of gas-liquid-solid interfacial self-assembly method and drying in vaccum desicator for about a day to enhance the adhesion between seed layer and nanospheres. After that, zinc oxide nanowires were synthesized using a low temperature hydrothermal method based on alkali solution. The specimens were immersed upside down in the autoclave bath to prevent some precipitates which formed and covered on the surface. The hydrothermal conditions such as growth temperature, growth time, solution concentration, and additives are variously performed to optimize the morphologies of nanowire. To characterize the crystal structure of seed layer and nanowires, morphology, and optical properties, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and photoluminescence (PL) studies were investigated.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 춘계학술발표강연 및 눈문개요집
• /
• pp.69-69
• /
• 1999

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.181-192
• /
• 2005

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.75.2-75.2
• /
• 2010

We studied the fabrication of polycrystalline silicon (pc-Si) films as seed layers for application of pc-Si thin film solar cells, in which amorphous silicon (a-Si) films in a structure of glass/Al/$Al_2O_3$/a-Si are crystallized by the aluminum-induced layer exchange (ALILE) process. The properties of pc-Si films formed by the ALILE process are strongly determined by the oxide layer as well as the various process parameters like annealing temperature, time, etc. In this study, the effects of the oxide film thickness on the crystallization of a-Si in the ALILE process, where the thickness of $Al_2O_3$ layer was varied from 4 to 50 nm. For preparation of the experimental film structure, aluminum (~300 nm thickness) and a-Si (~300 nm thickness) layers were deposited using DC sputtering and PECVD method, respectively, and $Al_2O_3$ layer with the various thicknesses by RF sputtering. The crystallization of a-Si was then carried out by the thermal annealing process using a furnace with the in-situ microscope. The characteristics of the produced pc-Si films were analyzed by optical microscope (OM), scanning electron microscope (SEM), Raman spectrometer, and X-ray diffractometer (XRD). As results, the crystallinity was exponentially decayed with the increase of $Al_2O_3$ thickness and the grain size showed the similar tendency. The maximum pc-Si grain size fabricated by ALILE process was about $45{\mu}m$ at the $Al_2O_3$ layer thickness of 4 nm. The preferential crystal orientation was <111> and more dominant with the thinner $Al_2O_3$ layer. In summary, we obtained a pc-Si film not only with ${\sim}45{\mu}m$ grain size but also with the crystallinity of about 75% at 4 nm $Al_2O_3$ layer thickness by ALILE process with the structure of a glass/Al/$Al_2O_3$/a-Si.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.9-12
• /
• 2015

Nano-structured electrodes were fabricated to develop efficient photoelectrochemical conversion systems for the synthesis of hydrogen from water and hydrocarbon fuels from $CO_2$. In this work, we compared the photoactivity of rutile $TiO_2$ nanorods grown on FTO and SEED/FTO by a hydrothermal method. An analysis of the microstructures showed that the density of nanorod/SEED/FTO samples, which showed only the (002) peak in their x-ray diffraction patterns, was two times higher than that of a nanorod/FTO sample. The photocurrent density of nanorod/SEED/FTO samples was increased by as much as 40% of the photocurrent density of the nanorod/FTO sample due to the increased specific density of the nanorods. However, the transient time for a recombination of photogenerated electrons and holes was 20 times faster in the nanorod/SEED/FTO. The seed layers are discussed as possible recombination sites.

• 한국식품영양과학회지
• /
• 제24권6호
• /
• pp.948-955
• /
• 1995

겨자의 항균성을 조사하기 의하여 추출용매에 따른 겨자의 항균성을 비교하고, 항균물질을 동정한 결과물, 메탄올 및 헥산에 대한 겨자 추출물의 항균성은 물 및 메탄올 추출물이 실험균주 모두에서 나타났으나 헥산에 의한 겨자 추출물은 항균활성이 거의 나타나지 않았다. SDE장치를 이용한 겨자 추출물의 항균성은 증류성분에서 항균활성이 아주 크게 나타났고, 메탄올에 의한 잔사 추출물도 항균활성이 조금 나타났으나 물층은 항균활성이 거의 나타나지 않았다. 겨자로 부터 3-iso-thiocynate-1-propene, 4-isothiocyanato-1-butene 및 4-ios-thiocyanatoethyl benzene과 같은 3종류의 isothiocyanate를 포함하여 30여종의 증류성분이 동정되었다.

• 한국자기학회지
• /
• 제23권1호
• /
• pp.7-11
• /
• 2013

본 연구에서는 $TiO_2$/Co/Pd 구조의 다층박막을 마그네트론 스퍼터링으로 GaAs(100), MgO(100), MgO(111), Si(100), glass와 같은 다양한 종류의 기판에 대해 제작하여 수직 자기 이방성에 대해서 연구하였다. 산소 분압 등의 $TiO_2$ 층의 증착 조건과 기판의 종류에 따른 Co/Pd 층의 수직 자기 이방성을 측정하였다. 그 결과, $TiO_2$ 층이 5 nm 이하 일 때는 기판의 종류에 영향을 받지만, 그 이상의 두께에 대해서는 MgO(111)을 제외한 기판의 영향이 크지 않음을 확인하였고, 이는 $TiO_2$ 씨앗층의 성장조건과 계면의 거칠기, 결정방향 등과 관련이 있음을 발견하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.41-41
• /
• 1998

Rare earth metal films have been used as a buffer layer for growing ferroelectric t thin film or a seed layer for magnetic multilayer. But when it was deposited on s semiconductor substrates for the application of magneto-optic (MO) storage media, it i is difficult to exactly measure magnetic cons떠nts due to shunting current, and so it n needs to grow metal films on insulator substrate to reduce such effect. Recently, it w was reported that ultra-thin Pt layer were epitaxially grown on A12O:J by ion beam s sputtering in 비떠 high vacuum and it can be used as a seed layer for the growth of C Co-contained magnetic multilayer. In this stu$\phi$, Pt thin film were epi떠xially grown on AI2D3 ($\alpha$)OJ) by RF magnetron s sputtering. The crystalline structure was analyzed by transmission electron microscope ( (TEM) and Rutherford Back Scattering (RBS)/Ion Channeling. In TEM study, Pt was b believed to be twinned on AI잉3($\alpha$)01) su$\pi$ace about Pt(ll1) plane.Moreover, RBS c channeling spectra showed that minimum scattering yield of Pt(111)/AI2O:J(1$\alpha$)OJ) was 4 4% and Pt(11J)/AI2D3($\alpha$)OJ) had 3-fold symmetry.