• Journal of Korea Foresty Energy
• /
• v.19 no.1
• /
• pp.13-19
• /
• 2000

This study was aimed to investigate the effect of several stimulatory trements of flower and seed growth on the reproductive and vegetative growth of Tilia amurensis RUBP. The effects of mounded planting, girdling, root-pruning, bending and foliar fertilizer application on the fifteen to forty yead-old tress growing in the experimental plantation at the Konkuk University and the National forest at the Daegwanryung were measured. The following results were obtained: (1) The number and the longitydinal growth of internode were reduced by the treatments. The xylem growth of the longitudited more greatly than the bark growth by all the treatments. (2)The increasong rate of the brand angle as compared to that of the control was 2.11% in the girdling treatment, 31.61% in the mounded planting treatment, and 22.14% in root-pruning treatment. (3) The foliar application of fertilizer(N, P, K, and B) before flowering increased leaf and stem growth, that one after pollen fertilization increased the fruit growth. (4)The foliar application of fertilizer before flowering increased the xylem growth while that after pollen fertilization increased the bark growth. (5)The stimulatory effects of root pruning and branch bending on the flowering and seed growth were shown relatively less than that of mounded planting. The effect of the moinded planting on the yield of the seeds has remained continuously every year since planting the trees.

• Current Photovoltaic Research
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2014

We developed a method of growing thin Si film at $600^{\circ}C$ by hot wire CVD using a very thin large-grained poly-Si seed layer for thin-film Si solar cells. The seed layer was prepared by crystallizing an amorphous Si film by vapor-induced crystallization using $AlCl_3$ vapor. The average grain size of the p-type epitaxial Si layer was about $20{\mu}m$ and crystallographic defects in the epitaxial layer were mainly low-angle grain boundaries and coincident-site lattice boundaries, which are special boundaries with less electrical activity. Moreover, with a decreasing in-situ boron doping time, the mis-orientation angle between grain boundaries and in-grain defects in epitaxial Si decreased. Due to fewer defects, the epitaxial Si film was high quality evidenced from Raman and TEM analysis. The highest mobility of $360cm^2/V{\cdot}s$ was achieved by decreasing the in-situ boron doping time. The performance of our preliminary thin-film solar cells with a single-side HIT structure and $CoSi_2$ back contact was poor. However, the result showed that the epitaxial Si film has considerable potential for improved performance with a reduced boron doping concentration.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.283-292
• /
• 2017

Purpose: Japanese Apricot, a type of plum, has various medicinal and economical applications. Plums are quite popular worldwide, but their deseeding remains a serious impediment to their processing. Therefore, a plum (Japanese Apricot) seed remover (PSR) was developed that can use various types of cutters according to the purpose of the plum processing, and its performance was evaluated. Methods: The proposed PSR, which allows multipurpose cutters, namely, zero-, two-, and four-blade cutters, to be installed, was first designed and manufactured. To identify appropriate parameters related to the cutting pressure, plums were harvested from three regions during three harvesting periods, and their geometrical and mechanical properties were measured. After application of the parameters related to the cutting pressure, a performance test was carried out on both fresh and frozen plums by identifying the ratios of the flesh recovery, seed recovery, seed breakage, deseeding efficiency, and machine efficiency. Results: The results show that, using the proper calculation of the processing parameters, 100% deseeding efficiency was facilitated regardless of the type of cutter used. However, in the case of a four-blade cutter, there are significant differences in the flesh recovery ratio according to the plum setting angle. Between the fresh and frozen plums, all cutters showed a significantly better flesh recovery ratio for the case of fresh plums. Conclusions: This machine will advance the plum processing technology, and eventually help the plum industry flourish.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.446-452
• /
• 2005

In order to examine the natural distribution variations between groups of the Stewartia koreana, the leaf form characteristics of the investigation sites were analyzed by each group. As a result, the Mt. Kumsan group showed a smaller value in leaf length, width, area, and the number of veins, but not in the petiole length and serration number. Among each character, the coefficient of variation(CV) of the characters excluding petiole length and leaf area was in a comparatively narrow range, from 11.6~17.4%. On the other hand, the CV of petiole length and leaf area between the groups was 34.9% and 28.4% respectively. The CV of these characters within the group was also extraordinary- petiole length showed 29.5~42% and leaf area showed 27.7~40.7%. Also, the simple correlation analysis between 12 leaf characteristics showed that the correlation between leaf width and leaf area was high (r=0.975). The correlations between leaf length and leaf area, between leaf length and leaf width were 0.971 and 0.969, respectively. A negative correlation between angle of leaf base and ratio of leaf length to leaf width was discovered (r= -0.843), meaning that the ratio of leaf length to leaf width decreases as angle of leaf base increases. A cluster analysis was enforced among leaf characteristics of the selected group as a standard on the similarity of quantitative, qualitative measurements. The results showed that at a 0.4 distance level, the subjects could be classified into 4 groups. Group 1 was the Mt. Jogyesan and Mt. Kayasan group, group 2 was Mt. Paegunsan, group 3 was Mt. Unmunsan and Mt. Mudungsan, and group 4 was Mt. Kumsan. At a distance level of 0.6, the subjects were classified into two groups. Group 1 was the Mt. Ktimsan group and group 2 was Mt. Mudungsan, Unmunsan, Paegunsan, Kayasan, and Cogyesan. Especially the Mt. Kumsan group had the smallest value in the leaf characteristics of leaf length, width, area, and the number of veins, showing an obvious difference from the other five groups. There were five principal components that had a meaningful eigenvalue over 1.0 among the 12 extracted components. The explanatory power of the top two main components (leaf length and width) on the total variation was 52.7%. The explanatory power was 91.3% when all 5 main components were included.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.8-15
• /
• 2006

The size of the superconducting domains and the critical current density inside these domains have to be enhanced for most of cryomagnetic applications of melt-textured YBCO bulks. To enlarge the size of the domains we studied the multi-seeding technique based on a well-established procedure for preparing high quality YBCO monoliths using self-made SmBCO seeds. The distance between the seeds was optimised as a result of the investigation of the effects of various seed distances on the characteristics of the grain boundary Junctions. The influences of a-b plane intersections and c-axis misalignments were researched. Thereby, a small range of tolerance of the misorientations between the seed crystals was found. Field mapping was applied to control the materials quality and the superconductor's grain structure was investigated using polarisation microscopy. YBCO function elements with iou. seeds in a line and an arrangement of making type (100)/(100) and (110)/(110) boundary junctions, respectively, were processed. The trapped field profile in both sample types shows single domain behaviour. To demonstrate the potential of the multi-seeding method a ring-shaped sample was processed by placing sixteen seeds in a way to make both (100)/(100) and (110)/(110) grain junctions at the same time. The results up to now are very promising to prepare large single domain melt-textured YBCO semi-finished products in complex shapes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.427-430
• /
• 1985

Extrusion degree of stigma, numbers of opened florets at different time during anthesis, angle of opening florets and outcrossed seed set percent were investigated in four male sterile rices having background of Korean cultivars; Suwon 296A, Suwon 304A, Suwon 310A and Suwon 296GMS, and the Chinese cytoplasmic genetic male sterile rice Zhenshan 97A as control in order to get basic informations for hybrid rice breeding. The results obtained were summarized as follows; Extrusion degree of stigma in the four Korean male sterile lines tested was lower than in the Chinese one Zhenshan 97A. The better extrusion of stigma showed the higher outcross rate in male sterile rices. There were almost no relationships between peak of anthesis and outcrossed seed set in the male sterile rices tested. Large anthesis angle with long anthesis duration appeared to be essential for high outcrossed seed set of the male sterile rices. The genetic male sterile line showed the larger anthesis angle than the cytoplasmic and genetic male sterile one in the lines having the same background to the Korean rice cultivar Suwon 296.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.288-292
• /
• 2009

Hydrophobic/hydrophilic patterned substrates were fabricated on a glass substrate by a liquid phase deposition (LPD) method. Hydrophobic surface was obtained by modifying ZnO thin films with a rough surface using a fluoroalkyltrimethoxysilane (FAS) and hydrophilic surface was prepared by decomposing FAS on an exposed to UV light. The hexagonal ZnO rods were perpendicularly grown by LPD method on glass substrates with a ZnO seed layer. The diameter and thickness of hexagonal ZnO rods were increased as a function of increases of immersion time. The surface morphology, thickness, crystal structure, transmittance and contact angle of prepared ZnO thin films were measured by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), UV-visible spectrophotometer (UV-vis) and contact angle measurement. Hydrophilic ZnO thin films with a contact angle of $20^{\circ}{\sim}30^{\circ}$ were changed to a hydrophobic surface with a contact angle of $145^{\circ}{\sim}161^{\circ}$ by a FAS surface treatment. Prepared hydrophobic surface was pattered by an irradiation of UV light using shadow mask with $300\;{\mu}m$ or 3 mm dot size. Finally, the hydrophobic surface exposed to UV light was changed to a hydrophilic surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.7
• /
• pp.673-679
• /
• 2006

A sublimation method using the SiC seed crystal and SiC powder as the source material is commonly adopted to grow SiC bulk single crystal. However, it has proved to be difficult to achieve the high quality crystal and the process reliability because SiC single crystal should be grown at very high temperature in closed system. In this study, SiC crystal boules were prepared with different angles in trapezoid-shaped graphite seed holders using sublimation physical vapor transport technique (PVT) and then their crystal quality was systematically investigated. The temperature distribution in the growth system and the crystal shape were varied with angles in trapezoid-shaped graphite seed holders, which was successfully simulated using 'Virtual Reactor'. The SiC polytype proved to be the n-type 6H-SiC from the typical absorption spectrum of SiC crystal. The micropipe densities of SiC wafers in this study were measured to be < $100/cm^2$. Consequently, SiC single crystal with large diameter was successfully achieved with changing angle in trapezoid-shaped graphite seed holders.

• Korean Journal of Geomatics
• /
• v.5 no.1
• /
• pp.27-34
• /
• 2005

Unsupervised classification is an important area of research in image processing because supervised classification has the disadvantages such as long task-training time and high cost and low objectivity in training information. This paper focuses on unsupervised classification, which can extract ground object information with the minimum 'Spectral Angle Distance' operation on be behalf of 'Spectral Euclidian Distance' in the clustering process. Unlike previous studies, our algorithm uses the unit vector, not the spectral distance, to compute the cluster mean, and the Single-Pass algorithm automatically determines the seed points. Atmospheric correction for more accurate results was adapted on the Hyperion data and the results were analyzed. We applied the algorithm to the Hyperion and ETM+ data and compared the results with K-Means and the former USAM algorithm. From the result, USAM classified the water and dark forest area well and gave more accurate results than K-Means, so we believe that the 'Spectral Angle' can be one of the most accurate classifiers of not only multispectral images but hyperspectral images. And also the unit vector can be an efficient technique for characterizing the Remote Sensing data.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.5
• /
• pp.661-673
• /
• 1994

We have gathered a fatty acid to recycle the waste oil of food manufacturing process, and then made a soap from the waste oil by alkali saponification. Effects of the washing elements such as the concentration of the soap, temperature and time were evaluated to find out the optimum washing conditions, and results are as follows. 1. We could find soaps made from the soybean oil (A), corn oil (B), rape seed salad oil (C), cotton seed oil (D) and a soap consisting of the each oil 25% respectively (I) had the lowest surface tension at the concentration of 0.225% -0.25%. Compared with the single fatty-acid soap, the multi-component soap I showed the lower surface tension at the cmc. 2. All the samples of A-I showed the lowest contact angle for the solid material at the concentration of 0.25%. The multi-component soap of I showed higher contact angle than the single.component soaps of A, B, C and D. 3. The soap G, made from the waste oil, show lower surface tension than 5, made from the complex raw fats of the eatable fatty oil acid and H, commercial soap. 4. The washing efficiency depends on the washing time. Especially the 25-minute was found to be the optimum washing time. 5. The highest washing efficiency was found at the 0.25% cont. reagardless of the washing temperature. At 0.15% concentration level the washing efficiency reduces as washing tem- perature increases. At 0.3% concentration level the highest washing efficiency was found between $50^{\circ}$-$60^{\circ}$. 6. The soap made from the waste oil showed the highest washing efficiency in terms of concentration, temperature, and time. 7. The soap made from the waste oil showed the similiar concentration of hydrogen ion to the synthetic detergent. 8. The hand value of the fabric washed by the soap made from the waste oil was a little lower value than those washed by the synthetic detergent.