• Journal of The Geomorphological Association of Korea
• /
• v.27 no.3
• /
• pp.53-73
• /
• 2020

Morphology and grain size distribution of coastal dunes should be well documented because they are critical to dune's buffering capacity and resilience against storm surges. The nationwide coastal dune survey produced the dataset, including beach-dune topographic profiles and grain size parameters for frontal beaches, foredunes, and inland dunes. This research investigated the dataset to describe geomorphic and textural properties of coastal dunes: foredune slopes, dune heights above approximately highest high water, mean size, and sorting, together with associated variables of coastal setting that influence coastal dunes. It also explores the possibility of a dune type scheme based on gran size trends. The results are as follows. First, the coast in which dunes are developed is the primary control on foredune morphology and sediment texture. Coastal dunes on the east coast were developed more alongshore rather than inland, with gentler slopes on the higher ground and out of coarser sand. The shore aspect contributes to this pattern because the east coast cannot benefit from prevailing northwesterly. Second, grain size trends from beaches through foredunes to inland dunes were little identified. Third, 12 dune types were identified from 69 dunes, showing the indicative capability for the status of beaches and dunes. We confirmed that the dataset could increase our understanding of the overall characteristics of coastal dune morphology and texture, though there is something to be improved, for example, establishing the refined and comprehensive field survey protocol.

• Fisheries and Aquatic Sciences
• /
• v.4 no.2
• /
• pp.51-57
• /
• 2001

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) were measured in sediment samples from 19 stations in the coastal areas of Korea from February to July 2000. PCDDs and PCDFs were detected in all sediment samples. The concentrations of these con­taminants ranged from 18.2 to 804.0 pg/g dry weight and I-TEQ concentrations varied from 0.1 to 5.5 pg/g dry weight. Examination of homologue groups showed that octachlorinated dibenzo-p-dioxin (OCDD) was predominant congener in Korean coast. This pattern was similar to homologue profiles of marine sediments in which the main source of PCDDs/DFs was derived from the atmospheric deposition of particulate matters generated from various industrial activities. Grain size and total organic carbon (TOC) distribution are one of the important factors governing PCDDs/DFs concentration in this study.

• Journal of Environmental Impact Assessment
• /
• v.13 no.5
• /
• pp.251-262
• /
• 2004

In order to investigate the geochemical characteristics of surface sediments in lower Yeongsan river system, sediment samples from the main stream of Yeongsan river, Gomakwon and Hampyeong streams were collected and analyzed for grain size and metal and organic carbon contents. The sediment types of the streams widely vary from pebble to mud. The metal contents in the sediments are mainly dependent on grain size of the sediments, geology around the streams and organic matter contents from the domestic sewage. Enrichment factor (EF) representing the degree of metal contamination in the sediments are relatively low in the study area. But, high Zn and Pb values seem to be from the study area, partly.

• Journal of the korean society of oceanography
• /
• v.32 no.3
• /
• pp.112-119
• /
• 1997

Coastal sediments collected near the Youngkwang Nuclear Power Plant were analysed for major(Al$_2$O$^_3$, Fe$^_2$O$^_3$, MgO, CaO, Na$^_2$O, K$^_2$O, TiO$^_2$, MnO), trace (Ba, Sr, V, Co, Cr, Cu, Ni, Zn, Pb) metal, and P$^_2$O$^_5$ contents. The composition of bulk metals from most stations fits within the range as those in the average crustal and sedimentary rocks, suggesting that the anthropogenic perturbation of these components is insignificant. The abundance and distribution of total contents for the majority of metals in the surface sediment could be explained by the grain size and were associated with mud (<63 ${\mu}$m) contents. However, distributions of Ca, K, Sr and Ba did not have any significant association with the sediment grain size. This may be due to the geochemical coherence among these metals in certain minerals abundant in coarse grained fractions. The distribution of Pb appears to be partly affected by the contribution from aerosol fallout. Using the R'-mode factor analysis, we show that the variance of the metal contents could be explained by four factors which account for 93.7% of the total variance. It appears that texturally controlled and/or sorting factors influenced by fine fraction are the most dominant factors which determine the relative abundance and distribution of metals in the study area.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.4
• /
• pp.62-74
• /
• 2002

The purpose of this study is to find the variation of sedimentation patterns before Saemangeum reclamation. Residual flow before Saemangeum reclamation was calculated diagnostically from the observed water temperature and salinity data in May 1992 by the Marine Development Institute of Kunsan National University and wind data which were obtained from spring 1969 through winter 1977 by the Gunsan Meteorological Observatory. Three dimensional movements of injected particles due to currents, turbulence and sinking velocity are tracked by the Euler-Lagrange method. Calculated sedimentation patterns of riverine materials are highly similar to the observed ones. When suspended sediments with the size of soil grain of 60 ${\mu}m$ are injected from the Mangyeong River, their dispersion range of sediment is about 25km for 24 hours after the injection, while about 35km for 72 hours after the injection. When suspended sediments with the size of soil grain of 200 ${\mu}m$ are injected, their dispersion range of sediment is about 18km for 24 hours after the injection, while about 21km for 72 hours after the injection.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.304-312
• /
• 2011

Grain size analysis was conducted for a total of 402 surface sediments collected from 67 sites along three (upper, middle, and lower) transects corresponding to the high-, mid-, and low-intertidal zone of beach on the Sinjado, Nakdong River estuary in Nov. 2005 and May 2006. Sinja-do beach sediments showed uni-modal grain size distributions, in which the mode of $3.0{\phi}$ was dominant in 2005 whereas the mode of $2.5{\phi}$ in 2006. This coarsening trend was more remarkable in the western side of beach as well as in the mid- and low-intertidal zone. In this study, we focused on investigating characteristics of sediment size changes on the basis of transect data that differ in tidal elevation. For this purpose, a statistical test was applied for transect by transect comparison of grain size parameters such as mean, sorting, and skewness. Mean values between middle and lower transect, sorting values between upper and lower transect, and skewness values over the beach reflected statistically significant temporal changes. Also, mean and skewness parameters showed an inverse relationship which was more stronger in 2006 than in 2005. Temporal changes in Sinja-do beach sediments resulted in decrease of mean and sorting values but increase of skewness values, intensifying the inverse relationship between mean and skewness parameters.

• The Korean Journal of Quaternary Research
• /
• v.18 no.2 s.23
• /
• pp.19-22
• /
• 2004

Seasonal changes of topograpy, sediment grain size and accumulation rate on the Gomso-Bay tidal flat(Fig. 1), west coast of Korea, have studied in order to understand the seasonal accumulation pattern and preservation potential of tidal-flat sediments. Seasonal levelings across the tidal flat show that the landward movement of both intertidal sand shoals and cheiers accelerates during the winter and typhoon period, but it almost stops in summer when mud deposition is instead predominant on the middle to upper tidal flat. Seasonal variations of mean grain size were largest on the upper part of middle tidal flat where summer mud layers were eroded during the winter and typhoon periods(Fig. 2). Measurements of accululation depths from sea floor to basal plate reveal that accumulation rates were seasonally controlled according to the elevation of tidal-flat surface(Table 1) : the upper flat, where the accumulation rate of summer was generally higher than that of winter, was characterized by a continuous deposition throughout the entire year, whereas on the middle flat, sediment accumulations were concentrated in winter realtive to summer, and were intermittently eroded by typhoons. The lower tidal flat were deposited mostly in winter and eroded during summer typhoons. Cancores taken across the tidal flat reveal that sand-mud interlaers resulting from such seasonal changes of energy regime are preserved only in the upper part of the deposits and generally replaced by storm layers downcore(Fig. 3). Based on above results, it is suggested that the storm deposits formed by winter stors and typhoons would consist of the major part of the Gomso-Bay deposits(Fig. 4).

• 한국해양학회지
• /
• v.27 no.1
• /
• pp.55-65
• /
• 1992

Ninety-seven surface sediment samples, collected from the southeastern part of the Yellow Sea, were analyzed for their contents of five metallic elements, including Fe, Mn, Ni, Cu and Pb as well as their grain-size and calcium carbonate content. The result showed a contrasting behaviour among the five metallic elements. with respect to their relationship with the sediment grain0size. contents of nickel and copper demonstrated a fairly linear relationship with the pediment grain-size whereas those of manganese and lead did not. This different behaviour in these metals was interpreted as being the result of the anthropogenic inputs (for Pb) and modification during the early diagenesis (for Mn). The R0mode factor analysis result also confirmed the different behaviour of manganese and lead from that of copper and nickel. Based on this different behaviour in metals the (Mn+Pb)/(Cu+Ni) ratio was suggested as a possible criterion for distinguishing the fine sediments in the study area, which originated from two different source area. China and Korea.

• Journal of Environmental Science International
• /
• v.24 no.8
• /
• pp.969-980
• /
• 2015

In order to certificate the distribution and pollution of heavy metal of surface sediments in Nakdong River were collected and analyzed for grain size, water content, ignition loss and heavy metal content. Surface sediments mainly composed of sand(avg. 94.6%) and water content and ignition loss were 20.46%, 1.53% on average. Grain size were relatively fine and organic matter content were relatively high in the Hoichun and Sunakdonggang. Most of heavy metal content(Zn > Cr > Pb > Ni > Cu > Hg) in the Deokcheongang and Sunakdonggang were higher than the other streams. The Igeo were non polluted(less than 0) in all streams and the EF were relatively high in the small stream and PLI were non polluted(less than 1). In addition, organic matter, heavy metal content and pollution were highly correlation with grain size. Surface sediments in study area, heavy metal pollution of the Sunakdonggang were relatively high compared to the other stream but these results were not serious pollution that exceed the sediment pollution evaluation standard of river and lake in Korea and pollution levels adversely affected the majority of benthos were not.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.4
• /
• pp.27-41
• /
• 2017

In this study, geomorphological and geological research has been carried out to estimate the possibility of ancient port location near Hwaseong Dangseong. Geomorphological characteristics around Eunsupo were analyzed through comparison of past and present topographic maps and field survey. Grain size, age dating, and geochemical analysis on surface sediments and borehole sediments were performed. Through the geomorphological characteristics analysis, it was interpreted that Eunsupo area was submerged in seawater especially at high tide in the past, and that ships could approach to the inside of the area through the tidal channel which were developed in the area. It is also assumed that ships were anchored at a low elevation point in the area. The paleo-environmental change in the area was analyzed based on the classification of sedimentary environment using grain size distribution of surface and borehole sediments and geochemical analysis. It was confirmed that the geomorphological interpretation for the possibility of ancient port location coincided well with the paleo-environmental change interpreted through sediment analysis. This study is a basic study for estimating ancient port location, and it is expected that more accurate paleo-environmental changes will be restored through detailed geomorphological survey and additional borehole analysis in the future research.