• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.spc1
• /
• pp.223-230
• /
• 2006

We investigated the spring and summer community structure of meiobenthos in a tidal-falt near Iwon, Korea, in 2002 and 2003. In total, 12 meiofaunal groups were found in the study area among which nematodes were the most dominant. Benthic foraminiferans, harpacticoid copepods, polychaetes, and crustacean nauplli were also dominant groups at all sites. The total density of meiobenthos at each station was be 246-2,177 ind./$10cm^2$. As the depth of sediment increased, the density of meiobenthos at each station gradually decreased. Changes in the vertical distribution of meiobenthos in the study area occurred mainly near the sediment surface (0-1 cm). Generally, between spring and summer the density of nematodes increased, and the density of other dominant meiofaunal groups (benthic harpacticoids, crustacean nauplii, benthic foraminiferans) decreased near the sediment trap the control site of sediment traps compared to that at the control site. The results of cluster and multidimensional scaling plots indicate that the meiofaunal community changed following construction of a low artificial wood groin structure.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.399-403
• /
• 1998

Absorption coefficient per mass unit of particles, specific absorption coefficient, is one of main parameters in developing algorithms for ocean color remote sensing. Specific absorption coefficient of chlorophyll (a$^*_{ph}$) and suspended sediment (SS) were analyzed by "wet filter technique" and "Kishino method" for data sets observed in the Yellow and Mediterranean Seas. A new data-recovering method for the filter technique was also developed using spectrum slopes. This method recovered the baseline of spectrum that was often missed in the Kishino method. High a$^*_{ph}$($\lambda$) values in the oligotrophic Mediterranean Sea and low values in the Yellow Sea were observed, spanning over the range of 0.02 to 0.12 $m^2$/mg, at the chlorophyll maximum absorption wavelength 440nm. The empirical relationship between a$^*_{ph}$ and chlorophyll concentration was found to fit a power function, which was slightly different from that proposed by Bricaud et ai. (1995). Absorption specific coefficients for suspended sediment (a$^*_{SS}$) didn't show any relationship with concentrations of suspended sediment. However, the average value of a$^*_{SS}$ at 440nm was close to the specific absorption coefficient of soil (loess) measured by Ahn (1990). The more-pronounced variability of a$^*_{SS}$ than a$^*_{ph}$ perhaps can explain more wide range of size-distribution for SS, which were determined by their specific gravity and agitation of water mass in the sea surface.

• Journal of Marine Life Science
• /
• v.6 no.1
• /
• pp.9-22
• /
• 2021

We determined the composition of water and sediment bacterial assemblages from the East Sea using 16S rRNA gene sequencing. Total bacterial reads were greater in surface waters (<100 m) than in deep seawaters (>500 m) and sediments. However, total OTUs, bacterial diversity, and evenness were greater in deep seawaters than in surface waters with those in the sediment comparable to the deep sea waters. Proteobacteria was the most dominant bacterial phylum comprising 67.3% of the total sequence reads followed by Bacteriodetes (15.8%). Planctomycetes, Verrucomicrobia, and Actinobacteria followed all together consisting of only 8.1% of the total sequence. Candidatus Pelagibacter ubique considered oligotrophic bacteria, and Planctomycetes copiotrophic bacteria showed an opposite distribution in the surface waters, suggesting a potentially direct competition for available resources by these bacteria with different traits. The bacterial community in the warm surface waters were well separated from the other deep cold seawater and sediment samples. The bacteria exclusively associated with deep sea waters was Actinobacteriacea, known to be prevalent in the deep photic zone. The bacterial group Chromatiales and Lutibacter were those exclusively associated with the sediment samples. The overall bacterial community showed similarities in the horizontal rather than vertical direction in the East Sea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.4
• /
• pp.207-212
• /
• 1982

Soils and sediments have been uniquely tagged by radioactive isotopes as a result of nuclear test explosions in the 1950's and 1960's. Fallout $^{137}Cs$ strongly fixed to fine soil particles, was measured in sediment profiles in Larto Lake to calculate the sedimentation rate as a time dependence. The Lake sediment profiles indicated an average rate of 1.6 to 3.1 cm/yr of sediment deposition since 1958. The rate of sediment depositions clearly decreased with time. Particle size distribution in sediment was reflected almost fine particles in lake.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.3
• /
• pp.135-148
• /
• 2018

Reservoir sedimentation is a major environmental issue, and various sediment load controls and plans have been proposed to secure clean and safe water resources. The objectives of this study were to estimate soil loss in the upper basins and predict sediment deposition in Ipjang reservoir using hydrologic and hydraulic model. To do so, SWAT (Soil and Water Assessment Tool) and EFDC (Environmental Fluid Dynamics Code) was used to estimate soil loss in two upper basins and to predict spatial distribution and amount of sediment deposition in the Ipjang reservoir, respectively. The hydrologic modeling results showed that annual average soil loss from the upper basins was 500 ton. The hydraulic modeling results demonstrated that sediment particles transported to the reservoir were mostly trapped in the vicinity of the reservoir inlet and then moved toward the bank over time. If long-term water quality monitoring and sediment survey are performed, this study can be used as a tool for predicting the dredging amount, dredging location and proper dredging cycle in the reservoir. The study findings are expected to be used as a basis to establish management solutions for sediment reduction.

• Journal of Ecology and Environment
• /
• v.38 no.3
• /
• pp.319-326
• /
• 2015

This study investigates the behavioral characteristics and forms of phosphorus in the sediment according to the oxygen condition (aerobic/anaerobic). In the behavioral characteristics analysis, Al-P and Fe-P concentrations were the highest among the forms of inorganic phosphorus, and therefore had the strongest impact on sorption and release corresponding to environmental condition changes. In the experimental investigation of the inorganic forms of phosphorus in the sediment according to the oxygen condition, we determined that the forms of inorganic phosphorus did not greatly affect the sorption or release reaction because the distribution ratios of the inorganic forms remained constant corresponding to changes of dissolved oxygen (DO) conditions. In contrast, the forms of organic phosphorus in the sediments affected both sorption and release. Furthermore, labile-P and moderately labile-P forms were the major mechanisms of sorption in sediment. Moderately labile-P was the greatest contributor to phosphorus release action in sediment. As environmental changes are important for the behavioral characteristics of phosphorus in sediment, the forms of phosphorus should be considered to have a greater effect, especially in the organic phosphorus case. Therefore, based on the present study results, sediment evaluation aimed at controlling internal pollutants in reservoirs should include an examination of the forms of phosphorus present, as well as the release characteristics of environmental changes, which are influential factors of phosphorus control. Further research in this field is required.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.223-233
• /
• 2005

In this study, a two-dimensional model for identifying areas of erosion and deposition over a basin was developed based on the mass balance principle in a distributed model. The program consists of three steps: (a) estimation of soil erosion; (b) determination of flow amount and direction; and (c) estimation of mass balance. Soil erosion was estimated with USLE. A single-direction (SF) and a multi-direction flow algorithm (MF) were applied to estimate slope length (L). The Maximum Downhill Slope Method (MDS) and the Neighborhood Method (NBH) were used to estimate the slope degree (S). Sediment transport resulting from eroded soil was estimated using Ferro's (1998) and Swift's (2000) sediment delivery ratio (DR). The model was validated by comparing the predicted sediment yields for three basins with measured data. The developed algorithm showed that Ferro's DR method combined with the MDS and MF produced the best agreement with the dredging records of three agricultural reservoir basins in Korea.

• Korean Journal of Microbiology
• /
• v.38 no.2
• /
• pp.119-126
• /
• 2002

ATP concentrations far estimating total microbial biomass in the sediment were measured in three different marine sedimentary environments. ATP concentrations were highest in the surface sediment and decreased with increasing sediment depth and distance from the land. The results indicated that the benthic microbial biomass is primarily controlled by nutrient inputs from the overlying water column. Because of the longer residence time and adsorption to the sediment, the variations in organic carbon (OC) contents with sites and depths were not as distinct as that of ATP, and the correlation between OC and ATP was not significant in the coastal sediments. No significant correlation between OC and ATP in the coastal sediments also suggested that microbial biomass in the labile organic-enriched coastal sediment is suppressed by the grazing of higher trophic level such as meiofauna. Overall regional and vertical distribution of ATP indicated that h\`w can be a relevant tool for measuring total microbial biomass in various marine sedimentary environments.

• Journal of Environmental Science International
• /
• v.27 no.7
• /
• pp.477-488
• /
• 2018

In this study, heavy metal levels at the sediment monitoring network site upstream of the Gangjeong-Goryeong weir in the Nakdong River were surveyed from 2012 to 2016. We assessed the sediment pollution level using various pollution indexes based on ICP-MS analysis. The stream sediment pollution assessment standard, established through Regulation No. 687 of the National Institute of Environmental Research (2015), pollution load index (PLI), potential ecological risk index (RI), and mean PEL Quotient (mPELQ) were used to evaluate the sediment pollution level. We verified the representativeness of the monitoring point through the distribution of sedimentation and scour behavior by river bed surveying using anacousticDopplercurrentprofiler.

• Advances in concrete construction
• /
• v.4 no.1
• /
• pp.15-26
• /
• 2016

In Algeria, wastes are often stored in such conditions that do not meet standards. Today and more than ever, we really must implement an environmentally management of wastes. Recovery of waste in Algeria has a considerable delay due to the absence of a policy favorable to the development of waste management. But many researchers have shown the possibility to reuse dredged sediments in road construction. Through Europe, recent research works have been already performed on dam sediments. Present study fits into the context of the valorization of dredged sediments from Fergoug dam. They are found in considerable quantities and mainly composed of mineral phases, organic matters and water. The reservoir sedimentation poses problems for the environment and water storage, dredging becomes necessary. Civil engineering is a common way of recycling for such materials. Dredged sediments have not the required mechanical characteristics recommended by the standards as GTR guide (LCPC-SETRA 1992). So as to obtain mechanical performance, dredged sediment can be treated with cement, lime, or replaced materials like quarry sand. An experimental study has been conducted to determine physical and mechanical characteristics of sediments dredged from dam. Then different mixtures of sediment and/or quarry sand with hydraulic binders are proposed for improving the grain size distribution of the mixes. Finally, according these mixtures, different formulations have been tested as alternative materials with dredged sediments.