• 제목/요약/키워드: sectional losses

검색결과 29건 처리시간 0.026초

원심형 터보기계의 임펠러-볼류트 유동간섭에 관한 실험적 연구 (Experimental investigation of impeller-volute interaction on a centrifugal turbomachinery)

  • 이경훈;주원구
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.219-225
    • /
    • 2000
  • Primary function of a centrifugal compressor volute is to serve the flow from the impeller and diffuser to pipe system. But losses in volutes at off-design lead to poor stage efficiency and reduction of operating range. This is largely caused by the interaction between the impeller and volute flow fields. The magnitude of distortion is increased as the operating point is away from the design point and, as a result, the interaction between the impeller and volute is stronger. The objective of present study is to find the characteristics of tile flow in the diffuser and volute of the centrifugal compressor with rectangular cross-sectional volute. The measurements are carried out in two cases with the existence and nonexistence of the volute casing. The detailed pressure is presented by comparing the experimental results obtained at two cases with each others.

  • PDF

인버터용 고주파 변압기의 효율 향상을 위한 코어 형상 최적화 설계에 대한 연구 (A Study on Core shape optimization to Improve The Efficiency of High Frequency Transformer for Inverter)

  • 유진형;정태욱
    • 조명전기설비학회논문지
    • /
    • 제28권4호
    • /
    • pp.29-35
    • /
    • 2014
  • The purpose of high frequency transformer in the inverter is to reduce the voltage and current stresses of switch components when it operates at the large conversion ratio. But the loss of transformer is the major contributor in the efficiency of inverter. This paper presents the method of core design to minimize the loss of transformer. The total loss of transformer is minimized by adjusting the effective cross-sectional areas of core. The component ratio of losses are compared by using the finite-element analysis.

구형 축열체를 사용한 축열기의 성능예측: 압력손실과 열전달의 관계 (Performance Prediction of Heat Regenerators with using Spheres: Relation between Heat Transfer and Pressure Drop)

  • 조한창;조길원;이용국
    • 에너지공학
    • /
    • 제12권1호
    • /
    • pp.35-41
    • /
    • 2003
  • 본 연구에서는 배가스의 현열회수를 통해 연소기기의 열효율을 향상시키는 축열연소시스템에서 구형축열체를 이용한 축열기내 열유동을 해석할 수 있는 수치해석 코드를 개발하였다. 이를 통해 축열기내 비정상 열유동을 해석하고 축열기 길이를 포함한 축열기 형상과 축열체 구경에 따른 배열회수와 압력손실의 관계를 파악해 보았다. 수치해석은 1차원 2상 유체역학 모델을 도입하여 MacCormack방식으로 해를 얻었으며, 실험적 경향과 일치함을 알 수 있었다. 개발된 수치코드를 통해 얻은 결론은 축열기 길이가 길고 입자구경이 작으며 축열기내 유체 유속이 빠른 경우에 많은 배열을 회수할 수 있으나 압력손실이 커짐을 알 수 있었다.

Microbiota and Physicochemical Analysis on Traditional Kocho Fermentation Enhancer to Reduce Losses (Gammaa) in the Highlands of Ethiopia

  • Dibaba, Adane Hailu;Tuffa, Ashenafi Chaka;Gebremedhin, Endrias Zewdu;Nugus, Gerbaba Guta;Gebresenbet, Girma
    • 한국미생물·생명공학회지
    • /
    • 제46권3호
    • /
    • pp.210-224
    • /
    • 2018
  • Warqe (Ensete ventricosum) has been traditionally fermented in an earthen pit to yield a carbohydrate-rich food product named kocho, for generations. A fermentation enhancer (gammaa) was added to this fermenting mass to enhance the fermentation process. The objectives of this study were to assess the physicochemical properties and microbiota of the kocho fermentation enhancer culture to reduce losses. Cross-sectional study design was implemented to collect 131 gammaa samples on the first day of fermentation. The samples were further classified into four groups according to the duration of fermentation (14, 21, 30, and 60 days) practised in various households traditionally. The results showed that the fermentation time significantly affected the physicochemical properties and microbial load of gammaa (p < 0.01). As the fermentation progressed from day 1 to 60, the pH decreased and the titratable acidity increased. The total coliform, Enterobacteriaceae, aerobicmesophilic bacteria (AMB), yeast, and mould counts were significantly reduced at the end of fermentation. In contrast, the number of lactic acid bacteria (LAB) increased significantly until day 30 of fermentation, because of the ability of the LAB to grow at low pH. Lactobacillus species from LAB isolates and Enter obacteriaceae from AMB isolates were the most abundant microorganisms in gammaa fermentation. However, the Enterobacteriaceae and Lactobacilli species count showed decreasing and increasing trends, respectively, as the fermentation progressed. These isolates must be investigated further to identify the species and strain, so as to develop gammaa at the commercial scale.

Seroprevalence and risk factors of sheep and goat pox virus in selected districts of Wolaita Zone, Southern Ethiopia

  • Fentaye Kassa;Haben Fesseha;Mesfin Mathewos;Selenat Getachew;Nato Hundessa;Saliman Aliye;Isayas Asefa Kebede
    • Journal of Veterinary Science
    • /
    • 제25권4호
    • /
    • pp.57.1-57.12
    • /
    • 2024
  • Importance: Sheep and goat pox (SGP) virus infection is a highly fatal viral infection of small ruminants that causes major production losses in sheep and goats in Ethiopia while also limiting international trade. Objective: This study aimed to estimate the seroprevalence of SGP infection and assess related risk variables. Methods: A cross-sectional study was conducted from February to August 2023 on 384 serum samples taken from sheep and goats. A serum neutralization test was conducted to detect the presence of antibodies against the SGP virus in Wolaita Sodo Regional Laboratory. Results: The overall seroprevalence rate of SGP was 4.95%. Factors such as sheep (8.26%), female sheep and goats (7.45%), older sheep and goats (8.33%), larger flock size of sheep and goats (10.47%), poorly conditioned sheep and goats (31.58%), sheep and goats with a tick on their skin (10.38%), and animals that had not been vaccinated (5.17%) were found to have higher seroprevalence. Furthermore, the seropositivity in sheep was five times greater than in goats (adjusted odds ratio [AOR], 4.73; 95% confidence interval [CI], 1.39-15.99). Additionally, large-sized flocks of sheep and goats were more likely to be seropositive to pox disease than small-sized flocks (AOR, 6.73; 95% CI, 1.58-28.67). Conclusions and Relevance: Thus, the study revealed the prevalence of SGP in the Wolaita zone. Additional research should be conducted to estimate the extent of the disease at the regional level, and management measures should be implemented to reduce the economic losses associated with this condition.

Evaluation of Depression in Newly Diagnosed Breast Cancer Cases in Hatay Province of Turkey in 2011

  • Nazlican, Ersin;Akbaba, Muhsin;Okyay, R. Azim
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제13권6호
    • /
    • pp.2557-2561
    • /
    • 2012
  • Breast cancer is the most frequently diagnosed cancer and the leading cause of cancer death in females in Turkey. The main problems experienced by women with breast cancer are physical losses, emotional distress and degradation in family, work and social roles. The purpose of this cross-sectional retrospective study was to investigate the socio-demographical characteristics and depressive symptoms of 125 newly diagnosed cases with breast cancer reported to cancer control department of Hatay provincial health directorate in 2011. To evaluate the depressive symptoms the Beck Depression Inventory (BDI) was used. All 125 cases who participated in the study were female. The mean age was $49.2{\pm}11.9$. The mean BDI score of the cases was $17.5{\pm}10.6$. The number of cases whose BDI scores were 17 and above was 65 (52.0%), and the number of cases whose BDI scores were under 17 was 60 (48.0%). The most striking finding in our study was that only 4 of the cases were receiving psychological help and support. The rate of depression was found high in our study and psychological support is a must for patients with a life threatening disease such as cancer.

프리스트레스트 콘크리트 휨 부재의 민감도 해석 (Sensitivity Analysis for Flexural Behaviors of PSC Members)

  • 이존자;이봉구;김민주;이용학
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제6권2호
    • /
    • pp.183-194
    • /
    • 2002
  • A general procedure to evaluate the sensitivity of design variables to stresses and strains in PSC flexural members is proposed. To accomplish the purpose of this study, long-term losses including creep, shrinkage, and PS steel relaxation are formulated based on the equilibrium states of the deformed sectional geometry. Thereby, the formulation follows the basic steps which consider the fundamental formulas adopted by CEB-FIP, ACI, and KCI rather than the age adjusted effective modulus concept. Twenty-one design variable including the material and geometrical properties of concrete, nonprestressing steel and prestressing steel, and the geometry of the cross section are considered in the sensitivity analysis. The gradients of the stresses and strains needed for the sensitivity assessment are calculated in a closed format. The derived formulation is applied to the T-type section PSC beam with prestressing and nonprestressing steels for the sensitivity analysis. The analytically calculated sensitivity results are compared with those numerically calculated to ensure the validity of the proposed procedure.

점적관개용 디스크 여과기의 디스크 홈 단면 형상에 따른 수두 손실 특성 분석 (Analysis of Disk Filter Head Losses due to the Shapes of Disk Grooves in Drip Irrigation System)

  • 정승연;최원;최진용;김마가;이윤희
    • 한국농공학회논문집
    • /
    • 제60권2호
    • /
    • pp.25-36
    • /
    • 2018
  • Drip irrigation system is a low energy cost method which can efficiently save and supply water by dropping water slowly on the crop's root zone during crop growth. In the drip irrigation system, disk filters take an important role to physically remove impurity (inorganic and suspended organic) particles present in agricultural water which can cause emitter clogging. For the purpose, both top-and-bottom surfaces of the disk are grooved in micron size flowing from outside to inside. However, many congested flow paths in disk filter media incur higher head loss of inflow water resulting in relatively decreasing velocities depending on operation time than sand and mesh filters. Therefore, it is important to optimize the structure of disk filter in micro irrigation system. The head loss of disk filter media takes also charge of more than 60 % of total head loss in whole disk filter. This study is to find the appropriate cross-sectional shape of the disk groove to minimize the head loss by executing the experiment. The experiment used three disk filters that have similar filter body but have a half-elliptic and two kinds of triangular cross sections. The experimental results showed that the disk filter with half-elliptic cross sections of disk grooves have less head loss than the disk filter with regular triangular one.

Minimally Invasive Transforaminal Lumbar Interbody Fusion Using a Single Interbody Cage and a Tubular Retraction System : Technical Tips, and Perioperative, Radiologic and Clinical Outcomes

  • Lee, Chang-Kyu;Park, Jeong-Yoon;Zhang, Ho-Yeol
    • Journal of Korean Neurosurgical Society
    • /
    • 제48권3호
    • /
    • pp.219-224
    • /
    • 2010
  • Objective : A minimally invasive transforaminal lumbar interbody fusion (MIS TLlF) has recently been introduced. However, MIS TLlF is a technically challenging procedure. The authors performed retrospective analysis about MIS TLlF using a single interbody cage. Methods : Twenty-eight consecutive patients were treated by MIS TLlF. Of these 28 patients, 20 patients were included in this retrospective study. Perioperative, clinical, and radiologic outcomes were assessed. Clinical outcomes were assessed using Oswestry Disability Index (ODI) and Visual Analogue Scores (VAS). Fusion rates and cross-sections of operated spinal canals were assessed by CT. Results : Twelve patients underwent MIS TLlF at one segment and 8 patients at two segments (L3/4: 4, L4/5: 17, L5/S1: 7). Operation time for a single segment was 131.7 min and for two segment was 201.4 min, and corresponding blood losses were 208.3 mL and 481.2 mL, respectively. ODI and VAS scores were significantly improved at 6 months postop (ODI from 30.32 to 15.54, VAS from 7.80 to 2.20, p = 0.001) Twenty-two segments (78.6%) achieved grade I fusion, 4 segments (14.3%) achieved grade II, 2 segments (7.1%) achieved grade III and 0 segments achieved grade IV at 12 months. Postoperatively at 12 months, spinal canal cross sectional areas at disc spaces significantly increased from 157.5 to $294.3\;mm^2$ (p = 0.012). Conclusion : MIS TLlF achieved good clinical outcomes and high fusion rates. Our findings show that MIS TLlF performed with a single Interbody cage and a tubular retractor system can be used as a standard MIS TLlF technique.

발전소에서 활선 고전력 케이블의 운전 부하전류에 따른 도체 및 피복표면의 온도 분석 (Examination of Conductor and Sheath Temperatures Dependent on the Load Currents through High-Power Live Cables at a Power Station)

  • 엄기홍
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권1호
    • /
    • pp.213-218
    • /
    • 2017
  • 발전소에서 전기를 생산 및 공급하기 위하여 고전압 전력 시스템이 동작하고 있다. 고전압 시스템은 저전압 시스템과 비교하여 구조가 복잡하고, 규모가 크고, 가격이 비쌀 뿐만 아니라. 사고 발생시 저압 시스템을 포함하는 대부분의 설비들에 정전사고가 발생하여 막대한 경제적 손실을 초래한다. 설계부터 시공 및 관리를 더욱 철저히 해야 한다. 설치환경 및 사용 조건 부하량 등에 따라 차이가 있겠지만, 증설과정, 부적절한 설계 등으로 인하여 케이블의 단면적이 부족할 경우가 발생하며, 운전 전류에 의하여 초과된 허용온도는 케이블의 열화 상태를 초래한다. 우리는 케이블의 사고를 체계적으로 감시 및 예방하기 위한 측정 장비를 개발, 한국서부발전 주식회사(Korean Western Power Co. Ltd.)에 설치하여 활선 케이블을 진단하였다. 이 논문에서 우리는 케이블의 부하전류를 측정하고, 측정된 부하전류에 의한 온도 특성을 예측 연구한 결과를 제시한다. 이 온도 값을 해석하여 케이블의 열화에 미치는 영향을 예측할 수 있다.