• 한국작물학회지
• /
• 제45권4호
• /
• pp.237-240
• /
• 2000

This experiment was conducted to evaluate the effect of split application of nitrogen(N) on development of vascular bundle(VB) and yield components of rice. Two cultivars were used in this study; IR58, an indica type and Shinunbongbyeim a japonica type. The number and total cross sectional area of the VB in the peduncle and leaf blade were more and bigger in N split application than 100 percent basal fertilizer. Nitrogen split application at necknode differentiation stage increased the number and size of the VB. Nitrogen split application resulted in increased panicle number with application of N before transplanting and at tillering stage; increased spikelets number with N application at necknode differentiation stage; and increased spikelet fertility and 1000 grain weight with N application at necknode differentiation and heading stages. Grain yield increased 7-10% in N split as compared to all basal application. The total cross sectional area of VB in peduncle closely correlated with the number of spikelets per panicle. Nitrogen management can have an impact on spikelet differentiation through more and bigger VB and increase grain yield potential.

• 대한물리의학회지
• /
• 제5권4호
• /
• pp.615-621
• /
• 2010

Purpose : The purpose of this study was to compare chronic LBP patients and asymptomatic subjects on measures of multifidus size (cross-sectional area;CSA, thickness) and symmetry (proportional difference of relatively larger side to smaller side). Methods : Data were obtained from 12 asymptomatic subjects without a prior history of LBP (8 females, 4 males), and a retrospective audit was undertaken of records from 12 chronic low back pain patients (8 females, 4 males). CSA and Thickness of the lumbar multifidus muscles was measured from axial T1-weighted magnetic resonance images(MRI). Results : The results of the analysis showed that chronic LBP patients had significantly smaller multifidus CSA and thickness than asymptomatic subjects at L4-5 vertebral levels(p<.05). The asymmetry between sides was seen at L4- L5 vertebral level in patients with chronic low back pain presentations(p<.05). Conclusions : MRI provided a quantitative measure of change between asymptomatic subjects and chronic low back pain patients of multifidus muscle. MRI identified significant differences in cross-sectional area and thickness and helps to evaluate clinically and plan the treatment modalities of LBP.

• Journal of Chest Surgery
• /
• 제26권5호
• /
• pp.343-348
• /
• 1993

Growth of suture line and anastomosis is required for long-term success after the tracheal and bronchial surgery in infant and pediatric patient. We used various suture materials in these cases, but the results were differ. To select the adequate suture material in tracheal surgery, we tried next. Tracheal anastomoses were performed in 150 Sprague Dawley rats, aged 4 to 8 [mean 5.8] weeks and weight 62 to 106[mean 83.6] gram, to compare polydioxanone[PDS] 7-0, polyglactin 910[Vicryl]7-0, and polypropylene [prolene] 8-0 suture materials. In 150 rats, only 29[20%] were lived over 300 days, and the weight was 250 to 320[mean 289.5]gram. Cross sectional area of the anastomoses and two or three tracheal rings below anastomosis site were measured under microscope, and calculated and compared as Hsieh`s equition. Cross-sectional area,anastomosis site/normal site 100, were 89.4 $\pm$ 5.34% in PDS group[n=9], 75.7 $\pm$ 6.06% in Vicrylgroup [n = 10], and 80.8$\pm$ 4.06% in Prolene group[n = 10]. Histopathologic studies were done for all autopsies or put in death around 300 days postoperatively. PDS absorblion was not seen 16 weeks after suture but disappeared over 24 weeks slide. Vicryl absorbtion was noted postoperative 8 to 16 weeks, with marked tissue reaction. Prolene showed least tissue reaction, but the suture material was persisted with regional fibrotic capsule.Causes of death were respiratory failure in 76 cases, tracheal rupture in 22 cases, hemorrhage, biting, starvation and etc. in 23 cases. With the brief review of literatures, we report the results.

• Journal of Biosystems Engineering
• /
• 제18권2호
• /
• pp.100-109
• /
• 1993

The aim of this study was to provide the reasonable data for design of the nozzle which produces finer droplets on the same level of the effective travel distance or which transports droplets to the farther target on the reasonable atomization in comparison with the commercial nozzles being used much in Korean rural areas. Newly designed twin-fluid atomizers with some commercial nozzles were tested in this study, and their results were as follows : 1. The characteristics of the spray deposit distribution of No.1 nozzles for farther target were nearly same in the near or nearer travel distance less than 8m. Therefore it was reasonable to combine the characteristics of the spray deposit distributions of No.2 and No.3 nozzles to those of No.1 nozzle. 2. The effective travel distance was increased with increase of the sectional area of the jet ligament, and the maximum effective travel distance was reached to about 17m. 3. The droplet size was increased with increase of the sectional area of the jet ligament, and the maximum droplet size was produced in the front of the point of the maximum spray deposit distribution. 4. The atomization was excellent in the twin-fluid atomizer in comparison with the hydraulic atomizer and also the effective travel distances were nearly same level in both atomizers.

• 한국주조공학회지
• /
• 제26권2호
• /
• pp.85-91
• /
• 2006

Inclusions in Ti investment castings are generally known to have detrimental effects on the performance of the castings. However, actual inclusions are infrequent and hard to be located. As a result, it is extremely difficult to obtain sufficient amount of fatigue test specimens of titanium investment castings having inclusions in the gage section. Thus, in-depth research of the adverse influence of inclusions is also hindered. To address this problem, a new casting methodology of specimens containing hard alpha inclusions was developed in this study. To guarantee successful introduction of an inclusion and casting, a carefully designed mold with 8 legs and a special tool were employed. After solidification, castings were cut, and X-ray radiography determined that the inclusions were successfully incorporated into the castings. The castings were further prepared to obtain multiple test specimens and they were fatigue-tested consecutively. Fractography analysis confirmed that fatigue cracks initiated at the hard alpha inclusion. In a nonlinear regression model, the fatigue life can be modeled as an exponential function with a negative exponent of the cross-sectional area of an inclusion. The fatigue life of Ti specimens containing inclusions is inversely proportional to the cross-sectional area of an inclusion.

• Computers and Concrete
• /
• 제9권6호
• /
• pp.469-486
• /
• 2012

This paper presents Neuro-Fuzzy (NF) based empirical modelling of torsional strength of RC beams for the first time in literature. The proposed model is based on fuzzy rules. The experimental database used for NF modelling is collected from the literature consisting of 76 RC beam tests. The input variables in the developed rule based on NF model are cross-sectional area of beams, dimensions of closed stirrups, spacing of stirrups, cross-sectional area of one-leg of closed stirrup, yield strength of stirrup and longitudinal reinforcement, steel ratio of stirrups, steel ratio of longitudinal reinforcement and concrete compressive strength. According to the selected variables, the formulated NFs were trained by using 60 of the 76 sample beams. Then, the method was tested with the other 16 sample beams. The accuracy rates were found to be about 96% for total set. The performance of accuracy of proposed NF model is furthermore compared with existing design codes by using the same database and found to be by far more accurate. The use of NF provided an alternative way for estimating the torsional strength of RC beams. The outcomes of this study are quite satisfactory which may serve NF approach to be widely used in further applications in the field of reinforced concrete structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.403-408
• /
• 2003

The objective of this study is to understand the variables affected the confinement for the transverse reinforcement of the reinforced concrete structural walls with the T-shaped cross section subjected to cyclic lateral loads. The structural performance of T-shaped walls was advanced by the transverse reinforcement which restrained the concrete subjected to compressive stress. If the arrangement of transverse reinforcement was not suitable for the confinement, T-shaped walls happened the brittle failure by web crushing or bucking of vertical reinforcement at the compression zone. It is necessary to confine transverse reinforcement in order to prevent the these failure. But the location of neutral axis and the magnitude of ultimate strain vary according to the section shape, a ratio of axial load, a ratio of wall cross sectional area to the floor-plan area, an aspect ratio and the reinforcement ratio. Therefore, the objective of this research is to grasp the location of neutral axis and the range which needs for the confinement of transverse reinforcement through the results of the sectional analysis which varies the ratio of axial load and the ratio of vertical reinforcement.

• Journal of Acupuncture Research
• /
• 제35권1호
• /
• pp.4-10
• /
• 2018

The aim of this report was to show the effects of acupotomy in patients with carpal tunnel syndrome. Four patients were treated with acupotomy twice. Visual analogue scale (VAS), Tinel's sign, Phalen's test, Boston carpal tunnel syndrome questionnaire (BCTQ), muscular strength test, and a cross-sectional area of median nerve was measured using ultrasound before and after treatment. In all 4 cases, the VAS score, BCTQ score and cross-sectional area of median nerve, all decreased and muscular strength test score increased. Tinel's sign and the Phalen's test changed from a positive to a negative in most cases. This report shows that acupotomy is an effective treatment for carpal tunnel syndrome. Further larger are needed to fully evaluate the beneficial effects of this treatment.

• 대한수학회지
• /
• 제47권5호
• /
• pp.967-983
• /
• 2010

Let M be an n-dimensional complete simply connected Riemannian manifold with sectional curvature bounded above by a nonpositive constant $-{\kappa}^2$. Using the cone total curvature TC($\Gamma$) of a graph $\Gamma$ which was introduced by Gulliver and Yamada [8], we prove that the density at any point of a soap film-like surface $\Sigma$ spanning a graph $\Gamma\;\subset\;M$ is less than or equal to $\frac{1}{2\pi}\{TC(\Gamma)-{\kappa}^2Area(p{\times}\Gamma)\}$. From this density estimate we obtain the regularity theorems for soap film-like surfaces spanning graphs with small total curvature. In particular, when n = 3, this density estimate implies that if $TC(\Gamma)$ < $3.649{\pi}\;+\;{\kappa}^2\inf\limits_{p{\in}F}Area(p{\times}{\Gamma})$, then the only possible singularities of a piecewise smooth (M, 0, $\delta$)-minimizing set $\Sigma$ are the Y-singularity cone. In a manifold with sectional curvature bounded above by $b^2$ and diameter bounded by $\pi$/b, we obtain similar results for any soap film-like surfaces spanning a graph with the corresponding bound on cone total curvature.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.89-96
• /
• 2017

A cable tray is a structure made of metal or a non-combustible material that supports cables in the electrical wiring of buildings. Cable trays should be developed to meet the various requirements of the construction site. In this study, a design system was developed to calculate the maximum support load and the maximum deflection according to the cross-sectional shape of the cable tray. The cross-sections of cable trays were modeled by combining linear and arc elements, and cross-sectional characteristics such as the 2nd moment of area were calculated. The distributed load and the concentrated load were applied to the cable tray using the Euler beam theory, and then the deflection profiles and maximum stress were calculated. To verify the developed system, deflection distributions and maximum stresses for two types of cable trays were calculated and compared. The maximum deflection and maximum stress errors calculated from the developed system were found to be less than 4% compared with numerical analysis results.