• Economic and Environmental Geology
• /
• v.16 no.3
• /
• pp.223-243
• /
• 1983

palaeomagnetism is a major implement to define tectonic provinces and to estimate their past relative position quantitatively. In this sort of investigation it is tacitly assumed that the magnetization of the rocks under study was acquired at the time of their formation. However, because of the possibility of secondary alteration and/or replacement of magnetic minerals, this assumption is not always legitimate. To secure reliable palaeomagnetic data it is therefore fundamental to identify the carrier mineral of magnetization. This paper reviews magnetic mineralogy relevant to palaeomagnetism of terrestrial rocks. Under the heading of each mineral its genesis, crystal structure, magnetic properties, criteria for ore microscopic determination and secondary alteration are summerized. This paper should also be helpful in application of magnetic mineralogy to geothermometry and oxygen barometry in igneous petrology, diagenesis and provenance study in sedimentary petrology, metamorphic temperature determination and genesis study of ore deposits.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.7
• /
• pp.674-679
• /
• 2000

The Sirocco fan performance and its three-dimensional flow characteristics were numerically predicted by STAR-CD software. Turbulent flow computations were performed using approximately 500,000 mesh points, and the performance results of two computational methods, transient analysis and quasi-static analysis were compared with experimental data. At present, our attention was focused on localizing the three-dimensional flow characteristics of the Sirocco fin, especially the structure of the secondary flow in the scroll and the through-flow characteristics of the Sirocco fan blades. Also, for an optimization, the scroll passage was tilted with 10 degrees to change the flow characteristics and improve the performance of the Sirocco fan.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3148-3165
• /
• 1993

A cascade wind tunnel test for a turbine nozzle, which was designed for a small turbo jet engine in a previous study, has been conducted to evaluate its aerodynamic performance and losses. The large-scale blades were based on the mid-span profile of the nozzle. Oil film flow structure, and then 3-dimensional velocity components were measured in the flow passage with a 5-hold pressure probe, in addition to turbulent intensities at mid-span of cascade exit using a hot-wire anemometer. From this study, 3-dimensional growth of horseshoe and passage vortices in the downstream direction was clearly understood with near-wall flow phenomena. In addition, secondary flow and losses associated with the blade configuration were obtained in detail.

• Journal of Photoscience
• /
• v.8 no.2
• /
• pp.55-60
• /
• 2001

Ginseng (Panax genus) is one of the most medicinally important genera and consists of highly regarded medicines. Among the species of Panax, the ginseng species is widely known to have most medicinal quality. P. ginseng has 3 varieties, Jakyung, Chunggyung and Hwangsook, discovered in nature with different colors of stem and fruit, Jakyung has two cultivars, Yunpoong and Chunpoong. Rigorous phylogenetic analysis of these varieties and cultivars has been conducted with sequencing of rDNA region. The sequences of ITS1, ITS2 of every varieties and cultivars within P. ginseng were identical. The sequence of 5.8S rDNAs of Hwangsook variety were different from the sequences of 5.8S rDNAs of others by only one base pair at nucleotide position 14. In phylogenetic analysis and predicted RNA secondary structure study, it is assumed that evolution has proceeded from Hwangsook to other varieties. recently.

• Proceedings of the Korean Biophysical Society Conference
• /
• 1997.07a
• /
• pp.42-42
• /
• 1997

Local conformation of helical peptides in TFE solution are studied by NMR spectroscopy. One is a helix containing proline and the other is its alanine derivative in which alanine is substituted for the proline. Chemical shift and temperature coefficient In NMR spectroscopy can be used preliminarily to determine secondary structure in proteins and peptides.(omitted)

• Journal of Life Science
• /
• v.11 no.1
• /
• pp.43-47
• /
• 2001

A mutant tryptophan synthase $\alpha$-subunit, where Pro28 was replaced with Leu, tends to be expressed in recombinant E. coli. CD and fluorescence spectra of this protein indicate some changes in secondary and tertiary structure. Wild type protein was more or less affected by {TEX}$Ca^{2+}${/TEX} ion in regards of the fluorescent properties of its native, unfolded and intermediate forms, but the mutant protein was not at all. The dramatic structural changes may be related to the aggregation of this mutant protein.

• Journal of the Korean Magnetic Resonance Society
• /
• v.12 no.1
• /
• pp.40-50
• /
• 2008

Ghrelin is a unique peptide hormone that releases growth factor and it stimulates appetite. It comes from pre pro-ghrelin by the post translational modification process and its innate functions are known as food up-take and the growth hormone regulation. Therefore, the structural information of ghrelin precursor is of importance in understanding it function. From our results, we found that the solution structure of ghrelin is mostly random coil conformation at neutral pH value and the structural population changes with pH environments. Data from circular dichroism in different TFE concentrations revealed that the secondary structure changes from random coil to a-helix and the isodichroic point is observed at 202nm, implying that two equilibrium states exist between random coil and helical structure.

• Journal of Chest Surgery
• /
• v.8 no.2
• /
• pp.125-134
• /
• 1975

The record of 137 patients with spontaneous pneumothorax seen at Busan National University Hospital during past 3years were reviewed to study the possible pathogenesis and its effective management. and the results obtained as follows; 1] The incidence of the "spontaneous" pneumothorax which developed without underlying pathology was 13-1%. The majority of those cases was considered as the result of rupture of subpleural blebs. 2] The incidence of secondary pneumothorax which developed with underlying pathology was 50.0%, in which 42.3% was combined with pulmonary tuberculosis and 8, 0% was combined with pulmonary infection. The traumatic pneumothorax was developed in 36-5% of total series. 3] In age distribution, there was pronounced difference between spontaneous and secondary pneumothorax. The majority of spontaneous pneumothorax cases was 20-30 decade and tall and tall and thin in body structure. In secondary pneumothorax, however, the incidence was relatively high in age group more than 50 years old. 4] The incidence of pneumothorax combined with pulmonary tuberculosis was particularly high in our country, and the cause of pneumothorax was seemed due to the rupture of subpleural caseous foci in some cases, but the majority was seen due to the rupture of emphysematous blebs which were formed with a pathological process of chronic tuberculosis. 5]Closed [tube] thoracotomy was the main therapeutic approach of choice in the great majority ,of pneumothorax in our series with the relapse rate of 19.6%. However, open thoracotomy and adequate surgical procedures should be undertaken in patients with continuous air leakage over 7 days and recurrent attack of pneumothorax.

• Computers and Concrete
• /
• v.31 no.4
• /
• pp.337-348
• /
• 2023

Shear wall is commonly used as a lateral force resisting system of concrete mid-rise and high-rise buildings, but it brings challenges in providing relatively large space throughout the building height. For this reason, the structure system where the upper structure with bearing, non-bearing and/or shear walls that sits on top of a transfer plate system supported by widely spaced columns at the lower stories is preferred in some regions, particularly in low to moderate seismic regions in Asia. A thick reinforced concrete (RC) plate has often been used as a transfer system, along with RC transfer girders; however, the RC plate becomes very thick for tall buildings. Applying the post-tensioning (PT) technique to RC plates can effectively reduce the thickness and reinforcement as an economical design method. Currently, a simplified model is used for numerical modeling of PT transfer plate, which does not consider the interaction of the plate and the upper structure. To observe the actual behavior of PT transfer plate under seismic loads, it is necessary to model whole parts of the structure and tendons to precisely include the interaction and the secondary effect of PT tendons in the results. This research evaluated the seismic behavior of shear wall-type residential buildings with PT transfer plates for the condition that PT tendons are included or excluded in the modeling. Three-dimensional finite element models were developed, which includes prestressing tendon elements, and response spectrum analyses were carried out to evaluate seismic forces. Two buildings with flat-shape and L-shape plans were considered, and design forces of shear walls and transfer columns for a system with and without PT tendons were compared. The results showed that, in some cases, excluding PT tendons from the model leads to an unrealistic estimation of the demands for shear walls sit on transfer plate and transfer columns due to excluding the secondary effect of PT tendons. Based on the results, generally, the secondary effect reduces shear force demand and axial-flexural demands of transfer columns but increases the shear force demand of shear walls. The results of this study suggested that, in addition to the effect of PT on the resistance of transfer plate, it is necessary to include PT tendons in the modeling to consider its effect on force demand.

• Journal of Environmental Science International
• /
• v.25 no.12
• /
• pp.1673-1688
• /
• 2016

Gyeonghuigung palace is an important site as it was the secondary palace in Hanyang from the $17^{th}$ century to the mid-$19^{th}$ century. Its original state was lost because a number of buildings were damaged and the palace area was reduced. The entire palace can be seen only in "Seogwoldoan" a drawing of the western palace. With "Seogwoldoan" to show the complete configuration of Gyeonghuigung palace in detail as the main data and other relevant data used as supplementary sources, the aim of this work was to identify the figurative features around the plantings and the space configuration of the royal garden in Gyeonghuigung palace. The space configuration observed in the royal gardens in Gyeonghuigung palace deviated from the norms and strict systems of royal palaces. The free and uninhibited configuration of the royal garden was allowed in Gyeonghuigung palace because it was built as a secondary palace in a lower hierarchy. Furthermore, a royal garden characterized by unique and unlimited planting was created, with several spaces acting as both royal garden and rear garden as the rear gardens could not be separately configured due to the narrow space of Gyeonghuigung palace.