• Corrosion Science and Technology
• /
• 제11권3호
• /
• pp.96-102
• /
• 2012

0.1 M NaOH 용액에 PbO첨가양이 증가함에 따라 Alloy 600에 형성되는 산화막의 부동태 피막 특성이 열화되었다. 또한 뚜렷한 2중층 구조의 산화막이 점차 사라지고, 산화막내 존재하는 납의 양이 증가하였다. 산화막 내부 납의 양이 증가함에 따라 산화막 내부 니켈의 결핍이 점차 커졌다. 납에 의해 산화막의 부동태 특성이 약화됨에 따라, 응력부식균열 저항성 또한 급감하였을 것으로 판단된다.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.12-19
• /
• 2016

The <100> oriented $Fe_{83}Ga_{17}$ alloys with various contents of NbC or B were prepared by directionally solidification method at the growth rate of $720mm{\cdot}h^{-1}$. With a small amount of precipitates, the columnar grains grew with cellular mode during directional solidification process, while like-dendrite mode of grains growth was observed in the alloys with higher contents of 0.5 at% due to the dragging effect of precipitates on the boundaries. The NbC precipitates disperse both inside grains and along the boundaries of $Fe_{83}Ga_{17}$ alloys with NbC addition, and the Fe2B secondary phase particles preferentially distribute along the grain boundaries in B-doped alloys. Precipitates could affect grain growth and improved the <100> orientation during directional solidification process. Small amount of precipitate element addition slightly increased the magnetostrictive strain, and a high value of 335 ppm under pre-stress of 15 MPa was achieved in the alloys with 0.1 at% NbC. Despite the fact that the effect on magnetic induction density of small amount of precipitates could be negligible, the coercivity markedly increased with addition of precipitate element for $Fe_{83}Ga_{17}$ alloy due to the retarded domain motion resulted by precipitates.

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.219-225
• /
• 2020

The directed energy deposition (DED) process of metal 3D printing technologies has been treated as an effective method for welding, repairing, and even 3-dimensional building of machinery parts. In this study, stainless steel 316L (STS316L) and Inconel 625 (IN625) alloy powders are additively manufactured using the DED process, and the microstructure of the fabricated STS316L/IN625 sample is investigated. In particular, there are no secondary phases in the interface between STS316L and the IN625 alloy. The EDS and Vickers hardness results clearly show compositionally and mechanically transient layers a few tens of micrometers in thickness. Interestingly, several cracks are only observed in the STS 316L rather than in the IN625 alloy near the interface. In addition, small-sized voids 200-400 nm in diameter that look like trapped pores are present in both materials. The cracks present near the interface are formed by tensile stress in STS316L caused by the difference in the CTE (coefficient of thermal expansion) between the two materials during the DED process. These results can provide fundamental information for the fabrication of machinery parts that require joining of two materials, such as valves.

• Journal of Ginseng Research
• /
• 제37권2호
• /
• pp.227-247
• /
• 2013

MicroRNAs (miRNAs) are a class of recently discovered non-coding small RNA molecules, on average approximately 21 nucleotides in length, which underlie numerous important biological roles in gene regulation in various organisms. The miRNA database (release 18) has 18,226 miRNAs, which have been deposited from different species. Although miRNAs have been identified and validated in many plant species, no studies have been reported on discovering miRNAs in Panax ginseng Meyer, which is a traditionally known medicinal plant in oriental medicine, also known as Korean ginseng. It has triterpene ginseng saponins called ginsenosides, which are responsible for its various pharmacological activities. Predicting conserved miRNAs by homology-based analysis with available expressed sequence tag (EST) sequences can be powerful, if the species lacks whole genome sequence information. In this study by using the EST based computational approach, 69 conserved miRNAs belonging to 44 miRNA families were identified in Korean ginseng. The digital gene expression patterns of predicted conserved miRNAs were analyzed by deep sequencing using small RNA sequences of flower buds, leaves, and lateral roots. We have found that many of the identified miRNAs showed tissue specific expressions. Using the insilico method, 346 potential targets were identified for the predicted 69 conserved miRNAs by searching the ginseng EST database, and the predicted targets were mainly involved in secondary metabolic processes, responses to biotic and abiotic stress, and transcription regulator activities, as well as a variety of other metabolic processes.

• 한국보건간호학회지
• /
• 제18권1호
• /
• pp.74-79
• /
• 2004

The purpose of this study was to evaluate the effects of smoking prevention programs offered to primary and secondary school students in Seoul, and to analyze factors related to smoking for these students. A quasi-experimental study design was employed and a total of 8,717 students for pre-test and 7,925 students for post-test were participated in the study. The smoking prevention programs included poster and slogan contests. smoking cessation workshop. distribution of smoking prevention pamphlets, reinforcement of smoking regulations, and operation of mobile smoking cessation booth. The results indicated that smoking prevalence decreased after the intervention. However. despite the reinforcement of the regulation related to sales of tobacco to adolescents. more than $50\%$ of the participants still purchased tobacco from stores, while $20.8\%$ obtained tobacco through their friends. Stress, juvenile delinquency, and pocket money were identified as significant factors associated with tobacco use for these students. In conclusion, smoking prevention programs with multiple intervention strategies were effective in decreasing the smoking prevalence among adolescents. Further study is recommended to conduct an experimental study using comparison group to control the effect of other social influences such as national smoking cessation campaigns.

• 한국지반공학회논문집
• /
• 제21권7호
• /
• pp.5-12
• /
• 2005

화강풍화토의 강도와 변형특성을 조사하기 위하여 불포화배수 삼축압축실험을 실시하였다. 본 실험을 위하여 야마구치현의 시모노세키에서 화강풍화토를 구하였으며 주응력방향과 다짐방향을 0,45, 90도의 세가지 방향성을 갖도록 하였다. 등방압축시 발생하는 압축변형률은 다짐각도에 따라 크게 영항을 받는다. 이차압축시의 변형거동에 관한 시간의존성은 다짐각도와 관계가 없다. 다짐각도가 압축강도와 변형에 미치는 영향은 특히 낮은 구속압력시에 크다. 다짐각도가 다르다 하더라도 다일러틴시 비율은 다일러턴시로 인한 강도증가와 상관하여 변화한다. 따라서 다짐풍화토는 초기 비등방성 조직을 갖고 있는 모래와 같이 비등방성 역학적 성질을 갖는다고 할 수 있다.

• Journal of Ginseng Research
• /
• 제39권4호
• /
• pp.406-413
• /
• 2015

Background: Pathogenesis-related 10 (PR-10) proteins are small, cytosolic proteins with a similar three-dimensional structure. Crystal structures for several PR-10 homologs have similar overall folding patterns, with an unusually large internal cavity that is a binding site for biologically important molecules. Although structural information on PR-10 proteins is substantial, understanding of their biological function remains limited. Here, we showed that one of the PgPR-10 homologs, PgPR-10.3, shares binding properties with flavonoids, kinetin, emodin, deoxycholic acid, and ginsenoside Re (1 of the steroid glycosides). Methods: Gene expression patterns of PgPR-10.3 were analyzed by quantitative real-time PCR. The three-dimensional structure of PgPR-10 proteins was visualized by homology modeling, and docking to retrieve biologically active molecules was performed using AutoDock4 program. Results: Transcript levels of PgPR-10.3 expressed in leaves, stems, and roots of 3-wk-old ginseng plantlets were on average 86-fold lower than those of PgPR-10.2. In mature 2-yr-old ginseng plants, the mRNA of PgPR-10.3 is restricted to leaves. Ginsenoside Re production is especially prominent in leaves of Panax ginseng Meyer, and the binding property of PgPR-10.3 with ginsenoside Re suggests that this protein has an important role in the control of secondary metabolism. Conclusion: Although ginseng PR-10.3 gene is expressed in all organs of 3-wk-old plantlets, its expression is restricted to leaves in mature 2-yr-old ginseng plants. The putative binding property of PgPR-10.3 with Re is intriguing. Further verification of binding affinity with other biologically important molecules in the large hydrophobic cavity of PgPR-10.3 may provide an insight into the biological features of PR-10 proteins.

• 대한정형도수물리치료학회지
• /
• 제15권2호
• /
• pp.93-97
• /
• 2009

Anatomy: Facet joint syndrome most often affects the lower back and neck and refers to pain that occurs in the facet joints, which are the connections between the vertebrae in the spine that enable the spine to bend and twist. Many physicians have believed that the usual lesion of facet syndrome was an anatomical impairments of facet joint itself.. Facet joint injection using local anesthetics is a reliable method for the diagnosis and treatment for facet syndrome. Etiology: One of many possible causes is imbalances that can occur in stress levels, hormone levels, and nutritional levels. These imbalances can adversely affect posture, which can lead to neck and back pain. The common disorder called facet syndrome exhibits lower back pain, with or without, radiating pain to buttock and thigh due to facet joint arthropathy. Pain in the facet joint is supposedly the secondary effect of narrowing of joint space by sustained muscle contracture around joints. Syndrome: Facet joint syndrome tends to produce pain or tenderness in the lower back that increases with twisting or arching the body, as well as pain that moves to the buttocks or the back of the thighs. Other symptoms include stiffness or difficulty standing up straight or getting out of a chair. Pain can be felt in other areas such as the shoulders or mid-back area. Treatment: Non-drug treatments include hot packs, ultrasound, electrical stimulation, and therapeutic exercises. Stimulating blood flow using massage or a hot tub may also help. Alternative treatments include yoga and relaxation therapy. If your pain persists after trying these treatments, a surgical procedure called radiofrequency rhizotomy, which destroys the sensory nerves of the joint, may bring relief. Facet joint injection has been helpful in diagnosis and therapy for this facet syndrome. Radiofrequency thermocoagulation of medial branches is known to be an effective method of relieving pain caused by facet joint problems. We conclude that spasmolytic treatment of muscles connecting the two vertebral articular space would be better for treatment and diagnosis of facet syndrome rather than facet block with local anesthetic and steroid only.

• 동국한의학연구소논문집
• /
• 제5권
• /
• pp.33-52
• /
• 1996

The purpose of this study was to investigate efficient treatment in obesity. In order to help clinical application in obesity treatment, this study was performed to investigate the cause and treatment in obesity. The main finding of this study were as follows. 1. In the cause of oriental medicine in obesity, that were moisture(濕), phlegm(痰), gore(瘀), the productive heat(積熱), overeating, supemutrition, underaction, heredity and habitude, psychologic factor(stress) etc. 2. In the western medicine, the cause of obesity were genetic cause, endocrine disorder, hypothalamic extraodinary and secondary effect of drug. But simple obesity is the greater part. Also there were psychologicai and environmental causes. 3. Ear acupuncture of wide application were Naebunbi, Sinmun, Taejang, $ij{\check{o}}m$, $Pyej{\check{o}}m$, $Bij{\check{o}}m$ etc. 4. Body acupuncture of application were $Naej{\check{o}}ng$, $Sangg{\check{o}}h{\check{o}}$, Pungnyung, Kokchi, $Sam{\check{o}}mgyo$, $Umn{\check{o}}ngch{\check{o}}n$ etc. 5. In oriental medical treatment of obesity, Bangpungtongs ngsan(防風通聖散), Daesihotang(大柴胡湯), Seungkitang(承氣湯), Bangkihwangkitang(防己黃?湯), Richulsaryeungtang(二朮四笭湯), Taeksatang(澤瀉湯), Opieum(五皮飮), Gongyundan(控涎丹) etc were wide applicated. 6. The western medical treatment in obesity encourage the dietary cure, exercise cure and behavior adjustment than medical therapy or operation. In treatment of obesity, the dietary cure and herb-drug therapy, ear acupuncture and body acupuncture are effective. But weight maintenance after treating is more important. After all the continuous dietary cure, behavior adjusting cure and exercise cure are necessary.

• Journal of Ginseng Research
• /
• 제41권3호
• /
• pp.419-427
• /
• 2017

Background: Glycosylation of natural compounds increases the diversity of secondary metabolites. Glycosylation steps are implicated not only in plant growth and development, but also in plant defense responses. Although the activities of uridine-dependent glycosyltransferases (UGTs) have long been recognized, and genes encoding them in several higher plants have been identified, the specific functions of UGTs in planta remain largely unknown. Methods: Spatial and temporal patterns of gene expression were analyzed by quantitative reverse transcription (qRT)-polymerase chain reaction (PCR) and GUS histochemical assay. In planta transformation in heterologous Arabidopsis was generated by floral dipping using Agrobacterium tumefaciens (C58C1). Protein localization was analyzed by confocal microscopy via fluorescent protein tagging. Results: PgUGT72AL1 was highly expressed in the rhizome, upper root, and youngest leaf compared with the other organs. GUS staining of the promoter: GUS fusion revealed high expression in different organs, including axillary leaf branch. Overexpression of PgUGT72AL1 resulted in a fused organ in the axillary leaf branch. Conclusion: PgUGT72AL1, which is phylogenetically close to PgUGT71A27, is involved in the production of ginsenoside compound K. Considering that compound K is not reported in raw ginseng material, further characterization of this gene may shed light on the biological function of ginsenosides in ginseng plant growth and development. The organ fusion phenotype could be caused by the defective growth of cells in the boundary region, commonly regulated by phytohormones such as auxins or brassinosteroids, and requires further analysis.