• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.46-55
• /
• 1982

When an oxidizing catalytic converter which makes use of platium as a catalyst is employed by means if emission control of CO and HC gasoline engine, the effects of important factors for the purification efficiency, i.e engine speed and secondary air rate, on the reduction of CO and HC concentrations in the exhaust gas are studied experimentally. In the experiment, gasoline and LPG are used as a fuel, and the purification efficiency is examined and the results of both cases are compared with each other. The experimental results showed that the purification efficiency in the case of LPG is usually higher than that of gasoline, and the optimum values of engin speed and secondary air rate for maximum purification efficiency exist in common on both cases.

• Environmental Engineering Research
• /
• v.12 no.5
• /
• pp.203-210
• /
• 2007

Since the emissions composition from the household products have potentially been associated with health risks for building occupants, the chemical composition emitted from the products should be surveyed. The current study identified the emission composition for 42 liquid household products, using a purge-and-trap method. This evaluation was done by classifying the household products into five product classes (deodorizers, household cleaners, color removers, pesticides, and polishes). Nineteen compounds were chosen on the basis of selection criteria. The quality control program for purge-and-trap and analytical systems included tests of laboratory blank Tenax traps and blank water samples, and the determination of calibration equation, measurement precision, method detection limit (MDL), and recovery. The number of chemicals varied according to the product categories, ranging from 4 for the product category of bleaches to 12 for the product categories of air fresheners and nail color removers. For all product categories, the emission composition and concentrations varied broadly according to product. It is noteworthy that most household products emit limonene: 19 of 25 cleaning products; 5 of 6 deodorizers; 1 of 3 pesticides; 3 of 3 color removers; and 4 of 5 polishes. It was suggested that the use of household products sold in Korea could elevate the formation of secondary toxic pollutants in indoor environments, by the reaction of limonene with ozone, which entered indoor environments or might be generated by indoor sources such as electronic air cleaning devices and copying machines.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.277-283
• /
• 1995

For the development of low NO$_{x}$ gas burners aimed for absorption chiller/heater unit, three proto type burners of different capacity (265000, 498000, and 664000 kcal/h) have been manufactured through a combustion method of step-by-step air injection. In order to characterize the overall features of the flame and the properties of the emission gas, the temperature of the flame and the concentration of NO$_{x}$ and CO were determined. The main factors in the design of burners (the area of primary air injection, the diameter of secondary air injection hole, fuel nozzle diameter) were observed to increase linearly with the scale-up of burner capacity. The flame temperature profiles of the burners were observed to be almost similar, irrespective of their capacity. However, as their capacity increased, the flame temperature slightly increased and the hot region of the flames moved to ward the flame tip along with the expansion to the direction of radius. From the proto type units, the amount of their NO$_{x}$ emission was determined to be around 25 - 30 vppm(3% )$_{2}$) and the CO emission was less than 19 vppm (3% $O_{2}$).TEX>).

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.4
• /
• pp.186-189
• /
• 2010

Nano-sized MgO single crystal powders have recently been reported to emit ultraviolet by stimulation of electrons in a vacuum. In this study, nanocrystalline MgO powders were applied to a xenon plasma flat fluorescent lamp (FFL) for a liquid crystal display backlight to improve its emission efficiency through the extra ultraviolet from the nano-MgO crystals. For comparison, a MgO nano-thin film was applied directly on the phosphors inside a lamp panel through e-beam evaporation. Adding MgO nano-crystal powders to the phosphors improved the luminance and efficiency of FFLs by around 20% and MgO nano-crystal coverage of 40% of the phosphor provided the best FFL emission characteristics; however, application of MgO thin film to the phosphors degraded the emission characteristics, even compared to FFLs without MgO. This was due to insufficient ultraviolet stimulation of the phosphors and the crystallinity and low secondary electron coefficient of the MgO.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.1_2
• /
• pp.22-39
• /
• 1992

The purpose of this study was to evaluate hypernasality, nasal air emission, glottal stop, articulation disorder in patients with velopharyngeal incompetency(V.P.I.) and to analyze speech improvement after pharyngoplasty. In this study 61 patients with velopharyngeal incompetency were tested, and in patents with pharyngoplasty speech problems before pharyngoplasty were compared with those after pharyngoplasty. The results obtained are as follows : 1. There are few speech problems in pronouncing the vowel sounds. 2. There are many speech problems in pronouncing the pressure sounds and few speech problems in non-pressure sounds. 3. Speech problems in patients with cleft palate are influenced not by anatomical defect but by severity of velopharyngeal incompetence after palatorrhaphy. 4. Operation methods which decrease the velopharygeal incompetence must be considered for reducing the speech problems. 5. Among the 61 cases with V.P.I. 19 cases(31%) showed nasal air emission and 24 cases(39%) showed glottal stop. 6. Pharyngoplasty is of benefit to primary precipitating components such as hypernasality, nasal air emission but of no benefit to secondary compensating component such as glottal stop. 7. There as no significant difference in speech improvement between pre-and post-pharyngoplasty(p<0.05).

• Tribology and Lubricants
• /
• v.35 no.5
• /
• pp.317-322
• /
• 2019

In spite of progress in tribological research, machine component failure due to friction and wear has been reported frequently. This failure may lead to secondary damage that can cause huge expense for maintenance and repair. To prevent economic loss, it is important to detect and predict the initial failure point. In this sense, various researchers have been tried to develop Condition Monitoring (CM) method using Acoustic Emission (AE) generated while the materials undergo failure. In this study, effect of particles on friction and wear was investigated using the pin-on-plate friction test and AE signal was recorded with a band-width type AE sensor. The experiments were performed in dry and lubricant conditions using steel and glass as specimens. After the experiment, 3D laser microscope image was captured to evaluate the wear behavior quantitatively. The AE signal was analyzed in time-domain and frequency-domain. The amplitude was compared with the frictional results. The results of this study showed that particle generation accelerate wear, generate high magnitude AE signal and change the frequency characteristics of the signal. Also, lubricant condition test results showed low coefficient of friction, low wear rate, and low magnitude of AE signal compared to the dry condition. It is expected that the results of this study will aid in better assessment of wear in CM technology

• Fourth Industrial Review
• /
• v.3 no.2
• /
• pp.1-10
• /
• 2023

Purpose - The main purpose of the paper is to examine the variables affecting carbon emissions in different nations around the world. Research design, data, and methodology - To measure its impact on carbon emissions, secondary data has data of the top 50 Countries have been taken. The stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT) model have been used to quantify the factors that affect carbon emissions. A modified version using Industry 4.0 and region in fundamental STIRPAT model has been applied with the ordinary least square approach. The outcome has been measured using both the basic and extended STIRPAT models. Result - Technology found a positive determinant as well as statistically significant at the alpha level of 0.001models indicating that technological innovation helps reduce carbon emissions. In total, 4 models have been derived to test the best fit and find the highest explaining capacity of variance. Model 3 is found best fit in explanatory power with the highest adjusted R2 (97.95%). Conclusion - It can be concluded that the selected explanatory variables population and Industry 4.0 are found important indicators and causal factors for carbon emission and found constant with all four models for total CO2 and Co2 per capita.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.31-36
• /
• 2010

SAI(Secondary Air Injection) system has been studied widely as one of the promising countermeasure for reducing HC emission at cold start. In this paper, in order to find out the optimal position of SAI, computational thermal fluid analysis on exhaust system adapted SAI system is performed using commercial 3-D CFD code, CFX. The present results showed that SAI position strongly affected the uniformity of air distribution in front of catalyst. And also through the decision process of optimal position of SAI, new index, uniformity of air distribution($U_{\phi}$) is proposed to define it quantitively. Because $U_{\phi}$ is very simple equation and similar with flow uniformity, it is very easy to figure out the physical meaning and to apply it to practices. Finally, we applied the index $U_{\phi}$ to the decision process of the optimal position of SAI, so that we could get the clear comparison results.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.1
• /
• pp.59-66
• /
• 2018

This study aims to evaluate the performance of the Air Quality Model (AQM) for the seasonal and spatial distribution of the $NH_3$ concentration in the atmosphere. To obtain observational data for the model validation, observations based on biweekly sampling have been conducted using passive samplers since April 2015 at multiple monitoring sites in the Tokyo metropolitan area. AQM, built based on WRF/CMAQ, was applied to predict the $NH_3$ concentration observed from April 2015 to March 2016. The simulation domain includes the Kanto region, which is the most densely populated area in Japan. Because the area also contains large amount of livestock, especially in its northern part, the density of the $NH_3$ emissions derived from human activities and agriculture there are estimated to be the highest in Japan. In the model validation, the model overestimated the observed $NH_3$ concentration in the summer season and underestimated it in the winter season. In particular, the overestimation in the summer was remarkable at a rural site (Komae) in Tokyo. It was found that the overestimation at Komae was caused by the transportation of $NH_3$ emitted in the northern part of the Kanto region during the night. It is suggested that the emission input used in this study overestimated the $NH_3$ emission from human sources around the Tokyo suburbs and agricultural sources in the northern part of the Kanto region in the summer season. In addition, the current emission inventories might overestimate the difference of the agricultural $NH_3$ emissions among seasons. Because the overestimation of $NH_3$ in the summer causes an overestimation of $NO_3{^-}$ in $PM_{2.5}$ in the AQM simulation, further investigation is necessary for the seasonal variation in the $NH_3$ emissions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.131-140
• /
• 2005

To investigate secondary carbonaceous species within PM$_{10}$ and PM$_{2.5}$ in Seoul urban Metropolitan Area (SMA), Korea. atmospheric particulate matters samples were collected at two sites of SMA at UOS (The University Of Seoul station) sites and IHU (InHa University of Incheon station) during the period of 4 to 14 January and 12 to 22 May, 11 to 15 August 2004, and their characteristics were qualitatively discussed. during January and May and August of 2004. Daily average mass concentration 0.095 mg/㎥ in PM$_{10}$ and 0.053 mg/㎥ in PM$_{2.5}$ for mass respectively. were observed in SMA. The concentrations of carbonaceous species contributed 18.4% and 16.4% of PM$_{2.5}$ and PM$_{10}$ during the sampling period, respectively, of which OC accounted for 68% and 52% more of the total carbon (TC). OC and EC concentrations and their mass percentages were higher in PM$_{2.5}$ than in PM$_{10}$ which could be attributed to generation process. Organic aerosols would constitute up to 38% of PM$_{2.5}$ based on the evaluation of 1.6 for the ratio of OC to organic particulate. Secondary organic carbon (SOC) were estimated to be more than 13% and up to 68% of total OC based on the minimum OC/EC ratio of 1.06/1.11 using least square method. Comparisons of OC and EC with trace elements. As results of carbonaceous species analysis, the dominant factor in view of fine particle (PM$_{10}$/PM$_{2.5}$) is primary emission source such as mobile, fossil fuel combustion etc. during winter time in SMA. But in summer periods, remarkable fine particle increasing factor was secondary organic carbon dependent to photochemical reaction. reaction.n. reaction.