• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.4 s.148
• /
• pp.521-528
• /
• 2006

In this study, we developed a new systematic approach to assess the influence of geometric parameter change on the horizontal and vertical stability indices. To do this, three phases of sensitivity analyses were carried out. First, typical geometric parameters were defined and their effects on hydrodynamic coefficients were assessed by the Sensitivity Analysis (SA) of the indirect method. Second, the effects of hydrodynamic coefficients on the stability indices were calculated. Finally, the sensitivities of geometric parameters on the stability indices were obtained by merging the outputs of two phases using chain rule. The developed approach cau contribute to a submarine designer to determine geometric parameters satisfying pre-requirements about stability systematically.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.10
• /
• pp.49-56
• /
• 1992

A new global routing algorithm which dynamically adjusts its cost parameters depending on the given routing poroblem to find a near optimum solution has been developed. The proposed algorithm efficiently performs global routing on general area in which all the pin positions are given. This algorithm is composed of two phases`In the first phase, it routes each net by searching a minimum cost path while ignoring the channel capacity. In the second iterative phase, it rips up nets which pass the channel at which the horizontal or vertical routing density exceeds the capacity and then it reroutes them using a modified set of cost parameters. Applying the above phases, paths for nets are found such that routing density doesn't exceed the capacity in each channel and that nets are routed with minimum cost. Experimental results for several benchmark examples including difficult-4, difficult-8, difficult-16, Primary1 and Primary2 show that our method generates better results than other published ones.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.527-530
• /
• 2002

A lot of efforts have been focused on the optimization of PIT parameters for Bi-2223/Ag wire. In this paper, initial annealing of Bi-2223/Ag wire to transform Bi-2212 orthorhombic from Bi-2212 tetragonal Precursor was investigated. This initial annealing step at low oxygen partial pressure were to transform Bi-2212 orthorhombic structure and to reduce the formation of second phases at superconducting wire. However Bi-2223 Phases were appeared at higher annealing temperature. Critical currents(Je) of Bi-2223/Ag tapes were sintered at low oxygen Partial pressure were higher than that of the wires sintered at atmosphere condition. In order to investigate the effect of rolling reduction ratio, Bi-2223/Ag HTS tapes were rolled with different reduction ratio. There were no clear difference of Je and filaments shape with various rolling reduction ratio.

• Journal of the Korean Ceramic Society
• /
• v.33 no.1
• /
• pp.74-82
• /
• 1996

Fe-Si based powders prepare by melting the metals in the composition of FeSi2,.Fe0.95Mn0.05Si2 and Fe0.95Co0.05Si0.2 were used as the starting materials together with a commercial FeSi2 powder to study the effect of oxidation on their thermoelectric properties. The powders were heated at 650~80$0^{\circ}C$ in dired air before forming and sintering at 1190 and 120$0^{\circ}C$ in Ar+7%H2. The microstructure and phases of the annealed specimens were observed using the optical microscopty SEM, EDS and XRD. The thermoelectric properties of the specimens were also measured. The temperature at which Seebe다 coefficient showed the maximum value increased with the degree of oxidation. Electrical conductivity showed a tendency to decrease in the oxidized samples regardless of their compositions. Seebeck coefficient of the specimen showed almost the same value even after oxidation which may be explained by the formation of the discontinuous second phases from impurities in the oxidized specimens.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1590-1593
• /
• 2002

We propose a dynamic location management scheme and named it Virtual Dynamic Location Area(VDLA) scheme. It allocates LA on the basis of terminal mobility, VDLA consists of two phases: VLA allocation and final LA selection phases. In the first phase it allocates primary and secondary VLAs to the terminal. In the second phase the terminal selects one of them using LA selection criterion. Cost analysis of the proposed scheme is peformed and its location management cost is compared with those of FLA and DBLA.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05b
• /
• pp.103-108
• /
• 2010

The purpose of this study is to analyze of the risk factors for oversea plants construction projects. For this study, risk factors data from related literature review, research organization and construction company was researched and classified under each EPC phases. In addition, a questionnaire survey by plant experts was conducted for analysis of risk weight and costs and time impact on each EPC phases. The results of this study are as follows: First, a detail design errors(engineering phase), a equipment procurement plan(procurement phase), and exchange rate fluctuations(construction phase) were analyzed the highest weight factors. Second, a financing plan(engineering phase), quantity take-off bill(procurement phase), and exchange rate fluctuations(construction phase) were analyzed the highest cost impact factors. Third, detail design errors(engineering phase), a equipment procurement plan(procurement phase), and schedule management errors(construction phase) were analyzed the highest time impact factors.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1145-1147
• /
• 2004

This paper proposed a new control method for single-phase hybrid active power filter. The proposed algorithm can change single phase system into the orthogonal system which has two phases giving time-delay in regular single phas and making the imaginary second phase. It can make orthogonal system like as being used in $3{\phi}/2{\phi}$ transformation with two phases. It can do complex calculation which calculates intantaneous reactive power. Istead of existing method applying to intantaneous reactive power theory in fixed reference frame, this paper proposed the algorithm which has advantage over reducing harmonics using rotating reference frame. It verified the effectiveness the proposed method through simulation and experiment.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.407-413
• /
• 1992

The chromatographic separation of the stereoisomers of the N-(3,5-dinitrobenzoyl) derivatives of fifteen dipeptide methyl esters and nine dipeptide alkyl esters was investigated on three different chiral stationary phases derived from N-acylated ${\alpha}-arylalkylamines$. Two of these CSPs contain second stereogenic centers. These secondary stereogenic centers of CSPs were proposed to provide secondary effects in terms of chiral recognition. From the elution orders of the four dipeptide stereoisomers and the separation factors of the enantiomeric pairs of the N-(3,5-dinitrobenzoyl) derivatives of the dipeptide alkyl esters having different alkoxy substituents, it was proposed that the intercalation of the alkoxy substituents of dipeptide derivatives between the connecting arm of CSPs may control the magnitude of chiral separations of dipeptide derivatives.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.9
• /
• pp.1281-1285
• /
• 2004

A line of Japanese quail selected for increased body weight for 15 generations (C) and an unselected control line (K) were used to examine the impact of selection for body weight on the growth curve of Japanese quail. In addition, the effect of sex on the growth curve in each line was also studied, namely females of C (CF), males of C (CM), females of K (KF) and males of K (KM). The monophasic and diphasic growth models were studied for adequacy in describing growth curves of quail in both sexes of the C and K lines. The monophasic function provided almost the same growth rate for both sexes in both lines. However, the growth rates calculated by means of the diphasic function differed between sexes for both lines, except for those calculated for C during the second growth phase. While there were 2-3 days difference between sexes in age at maximum gain in both lines with a monophasic model, the difference between sexes in the age at maximum gain in both lines became greater according to the diphasic model. There were 5 and 7 days difference between sexes in the age at maximum gain in line C for the first and second growth phases, respectively. A difference between sexes of 18 and 11 days in the age at maximum gain for the first and second phases, respectively, was estimated for line K when the diphasic function was fitted. The use of diphasic functions provides more detailed information on growth patterns. The results showed that the use of the diphasic function was better because it provided greater insights into understanding the biology of growth.

• Economic and Environmental Geology
• /
• v.33 no.4
• /
• pp.249-260
• /
• 2000

The development of dual volcanic chains, parallel to the trend of the subduction trench, is observed in the southern part of Korea. Elsewhere on the Earth volcanic arcs dominantly consist of two such chains. In the southern part of Korea, two volcanic chains within a single volcanic arc was developed. Kyongsang basin, where the first volcanic chain located, and Youngdong-Kwangju depression zone where the second volcanic zone located, showed sub-parallel volcanic rock distributed areas. Concentrations of incompatible elements in the southern part of Korea samples show clear across-arc variations, with lavas from the first volcanic chain being most depleted in these elements, all incompatible element concentrations increase towards the second volcanic chain. The above across-arc variation may be caused by the difference in solid phases coexisting with the fluid phases during the dehydration processes. The concentrations of incompatible elements, Zr/Y ratios, and Rb/K ratios indicate that the second volcanic chain (Youngdong-Kwangiu depression zone) was generated by low degrees of partial melting at the deeper depth compared to the conditions of the first volcanic chain (Kyongsang basin) and residual garnet probably attributed to the their partial melting.