• The Korean Journal of Malacology
• /
• v.18 no.1
• /
• pp.53-59
• /
• 2002

The distribution and density of the pen shell, Atrina (Servatrina) pectinata japonica, were investigated to estimate population ecological parameters and biomass. Samples were collected during cruises from April to June 1999 in the coastal waters of Chungchung-namdo, Korea. The oceanographic conditions such as depth, temperature, transparency and suspended solids were measured from sampling stations. Seawater depth ranged from 3.9 m to 75.9 m and the mean was 28.5 m (SE = 0.97). The mean density of the pen shell was higher in the depth of 18.0-30.8 m. The water temperature of the bottom ranged from 7.0-21.5$^{\circ}C$ and the mean was 14.$0^{\circ}C$. The transparency ranged from 1.2-13.5 m and the mean was 4.8 m. The suspended solids ranged from 6.0-93.5 mg/l and the mean was 48.0 mg/l. The sand proportion of the sediment was > 50%. The mean densities of the pen shell by sediment type were 7.3 individuals/40 m$^2$ (SE = 2.16) in the sand, 5.6 individuals/40 m$^2$ (SE = 1.48) in the muddy sand, 3.0 individuals/40 m$^2$(SE = 1.89) in the sandy mud, and none in the mud. The sandy bottom, accounting for 29.8% of the overall habitat area, had a maximum density of 7.3 individuals/40 m$^2$.

• ALGAE
• /
• v.21 no.1
• /
• pp.141-148
• /
• 2006

Benthic diatoms are known as a good food for shellfish in nature and in commercial hatchery of Jeju Island, Korea. Grammatophora marina is commonly found as dominant benthic micro-algae in Jeju coastal waters throughout the year. To know the best growth conditions of this species, culture was done in terms of three parameters; water temperature, salinity and nutrients. Each parameter was controlled by temperature of 15, 20 and 25°C; salinity of 25, 30 and 35 psu; and nutrient concentrations of 50, 100 and 200%. F/2 media was used with artificial seawater for the culture, which was continued for two weeks with L:D cycle 12:12 by using fluorescent light. Maximum specific growth rate was recorded 1.68 d–1 at temperature of 25°C with salinity of 35 psu and nutrient concentration of 200% on 6th day during the culture period. Maximum biomass was also observed 4.9 × 105 cells mL–1 in the same condition. This species may belong to the euryhaline and eutrophic habitat with warm condition. For nutritional aspects of this species, protein, lipid and carbohydrate were measured. The value of protein, lipid and carbohydrate was 4.96%, 15.82% and 5.65%, respectively. The antioxidant activities of 80% methanolic extract were 46.7%, 23.7% and 23.8% on DPPH (1,1-Diphenyl-2-picrylydrazy) radical, superoxide anion radical and hydrogen peroxide scavenging, respectively. Percentage metal chelating activity was 81.2%. Enzymatic extracts of Alcalase and Ultraflow showed remarkable scavenging activities on DPPH radical (86.5% and 57.2%, respectively), and superoxide anion scavenging activities were 45.3% and 41.4% from Kojizyme and Viscozyme extracts, respectively. Extract of Protomex revealed 24.8% activity on hydrogen peroxide and Neutase showed 30.8% on hydroxyl radical scavenging effects. Celluclast and Viscozyme extracts showed 33.2% and 32.1% activities on nitric oxide scavenging, respectively, while Alcalase showed 61.5% on metal chelating. This species contains higher lipids among the biochemical compounds and higher metal chelating activities from both 80% methanolic and enzymatic extracts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.779-785
• /
• 2015

Cathodic protection is recognized as the most cost-effective and technically appropriate corrosion prevention method for the submerged zone of offshore structures, ships, and deep-sea facilities. When cathodic protection is applied, the cathodic currents cause dissolved oxygen reduction, generating hydroxyl ions near the polarized surface that increase the interfacial pH and result in enhanced carbonate ion concentration and precipitation of an inorganic layer whose principal component is calcium carbonate. Depending on the potential, magnesium hydroxide can also precipitate. This mixed deposit is generally called "calcareous deposit." This layer functions as a barrier against the corrosive environment, leading to a decrease in current demand. Hence, the importance of calcareous deposits for the effective, efficient operation of marine cathodic protection systems is recognized by engineers and scientists concerned with cathodic protection in submerged marine environments. Calcareous deposit formation on a marine structure depends on the potential, current, pH, temperature, pressure, sea-water chemistry, flow, and time; deposit quality is significantly influenced by these factors. This study determines how calcareous deposits form in sea water, and assesses the interrelationship of formation conditions (such as the sea water temperature and surface condition of steel), deposited structure, and properties and the effectiveness of the cathodic protection.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.123-130
• /
• 2012

A cooling system is indispensable for the fossil and nuclear power plants which produce electricity by rotating the turbines with hot steam. A cycle of the typical cooling system includes pumping of seawater at the intake pump house, exchange of heat at the condenser, and discharge of hot water to the sea. The cooling type of the nuclear power plants in Korea recently evolves from the conventional surface intake/discharge systems to the submerged intake/discharge systems that minimize effectively an intake temperature rise of the existing plants and that are beneficial to the marine environment by reducing the high temperature region with an intensive dilution due to a high velocity jet and density differential at the mixing zone. It is highly anticipated that the future nuclear power plants in Korea will accommodate the submerged cooling system in credit of supplying the lower temperature water in the summer season. This study investigates the approach flow patterns at the velocity caps and discharge flow patterns from diffusers using the 3-D computational fluid dynamics code of $FLOW-3D^{(R)}$. The approach flow test has been conducted at the velocity caps with and without a cap. The discharge flow from the diffuser was simulated for the single-port diffuser and multi-ports diffuser. The flow characteristics to the velocity cap with a cap demonstrate that fish entrainment can significantly be minimized on account of the low vertical flow component around the cap. The flow pattern around the diffuser is well agreed with the schematic diagram by Jirka and Harleman.

• Journal of Aquaculture
• /
• v.10 no.2
• /
• pp.113-121
• /
• 1997

In order to developed the techniques for artificial seedling production of geoduck clam, Panope japonica, various stimulution for spawning induction and hatching condition were studied. Spawning induction by the air day or UV-irradiation stimulus were not effective. Water temperature stimulus was responsed 15.0~25.0% in May and 10.0% in June. But spawning induction by the gonad incision was highest with 15.0~45.0%. Ammonium hydroxide (NH4OH) stimulus adding in seawater were responsed 15.0% at 8/1000N~10/1000N, and ammonium hyhroxide solution injected in the gonads were responsed 5.0~10.0% at 5/100N~7/100N. The highest fertilization and hatching rate at various water temperature were ranged 74.5~89.2% in 11~$17^{\circ}C, \;84.3~89.5%\;in\;8~14^{\circ}C$, respectively. the highest fertilization rate and hatching rate in various salinity were ranged 72.5~88.5% in 25~$35tetperthousand$, 82.7~86.9% in 30~$35tetperthousand$, respectively. The optimum water temperature and salinity for fertilization and hatching to the 11~14$^{\circ}C$ and 30~$35tetperthousand$, respectively.

• Corrosion Science and Technology
• /
• v.13 no.1
• /
• pp.28-35
• /
• 2014

Recently, the fuel oil of diesel engines of marine ships has been increasingly changed to heavy oil of low quality as the oil price is getting higher and higher. Therefore, the spiral gear attached at the motor of the oil purifier which plays an important role to purify the heavy oil is also easy to expose at severe environmental condition due to the purification of the heavy oil in higher temperature. Thus, the material of the spiral gear requires a better mechanical strength, wear and corrosion resistance. In this study, the heat treatment(tempering) with various holding time at temperature of $500^{\circ}C$ was carried out to the alloy of Cu-7Al-2.5Si as centrifugal casting, and the properties of both hardness and corrosion resistance with and without heat treatment were investigated with observation of the microstructure and with electrochemical methods, such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram, and a.c. impedance. in natural seawater solution. The ${\alpha}$, ${\beta}^{\prime}$ and ${\gamma}_2$ phases were observed in the material in spite of no heat treatment due to quenching effect of a spin mold. However, their phases, that is, ${\beta}^{\prime}$ and ${\gamma}_2$ phases decreased gradually with increasing the holding time at a constant temperature of $500^{\circ}C$. The hardness more or less decreased with heat treatment, however its corrosion resistance was improved with the heat treatment. Furthermore, the longer holding time, the better corrosion resistance. In addition, when the holding time was 48hrs, its corrosion current density showed the lowest value. The pattern of corroded surface was nearly similar to that of the pitting corrosion, and this morphology was greatly observed in the case of no heat treatment. It is considered that ${\gamma}_2$ phase at the grain boundary was corroded preferentially as an anode. However, the pattern of general corrosion exhibited increasingly due to decreasing the ${\gamma}_2$ phase with heat treatment. Consequently, it is suggested that the corrosion resistance of Cu-7Al-2.5Si alloy can be improved with the heat treatment as a holding time for 48 hrs at $500^{\circ}C$.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.239-246
• /
• 2011

Groundwater in small islands is used as main water resource but the overuse of groundwater may cause seawater intrusion and temperature decrease in geothermal wells. This study aimed to characterize the hydrogeology of Maeum-ri area in Seokmo Island of Ganghwagun using long-term monitoring at groundwater wells and geothermal wells. In the monitoring period seasonal water level change, consistent drop or increase of water levels are not detected. The groundwater temperature about 10m below ground surface shows year cycle variation having two to five months difference with ambient temperature cycle. The storativity was calculated by tidal method. The storativity estimated by adapting tidal efficiency factor showed some larger values than that by using tidal time lag. The result suggested that the tidal method assuming several assumptions on aquifer condition may produce broad ranges but the calculated ranges at this application are reasonable. The similar shape of groundwater level change and tidal effects was observed at several wells clustered east-south-east direction which may implicate the distribution of vertical fracture system strongly related with groundwater flow channels. The applied methodology and study results will bc valuable to evaluate optimal pumping rate for the preservation of groundwater resources, and to manage geothermal development.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1201-1208
• /
• 2020

A mass of seawater with similar properties in the ocean is called a water mass, and the front is a sea area where two masses of different properties meet. The gradient algorithm is a method of extracting where the sea water temperature pixel changes rapidly assuming that the slope is large, and the place with the large slope is assumed to be a front. This method is able to process large amounts of satellite data at once. Therefore, in this study, we tried to find the front lines in the sea area around the Korean Peninsula by using a gradient algorithm. The study data used gridded sea surface temperature satellite data. The resolution was 1/4°, and the monthly average data from January 1993 to December 2018 were used. There were major five fronts representatively, China Coastal Front, South Sea Coastal Front, Kuroshio Front/ Kuroshio Extension Front, Subpolar Front and the Subarctic Front. As a result of comparing the distribution of front by season, more types of front were distributed in winter and spring than in summer and autumn, and the distribution range was wider.

• Fisheries and Aquatic Sciences
• /
• v.4 no.4
• /
• pp.208-218
• /
• 2001

We have investigated the gonad index (GI), gonadal development, reproductive cycle, first sexual maturity, sex ratio, the number of spawned eggs and spawning frequency of the Manila clam, Ruditapes philippinarum. Samples were collected from the intertidal zone of Komso Bay, Korea from January to December in 1999. Monthly changes in the gonad index (GI) and condition index showed a similar pattern in the reproductive cycle. The spawning period was once a year between early June and early October, there was a spawning peak between July and August when seawater temperature was over $20^{\circ}C$. The reproductive cycle of this species can be categorized into five successive stages; early active (February to March), late active (April to May), ripe (April to August), partially spawned (June to October), and spent/inactive stage (August to March). Percentages of first sexual maturity of female and male clams of l5.1-20.0mm in shell length were $56.3\%$ and $60.0\%$, respectively, and $100\%$ for the clams >25. mm. The sex ratio of individuals >15.1 mm in shell length was about 1:1 $(\chi^2= 0.02,\;p>0.05)$. Number of the eggs released from each clam by the induction increased as the size of clam in terms of shell length increased. Mean number of the eggs from the second induction of the spawning was $75.35-84.30\%$ $(average\;79.81\%)$ of the number of the eggs released in the first spawning. Our data indicated that R. philippinarum in Komso Bay has one major spawning peak with over two minor spawning, and the interval of each spawning was estimated to be approximately 15-17 (average 16.5) days.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.4
• /
• pp.253-260
• /
• 2008

Gonadal development, gametogenesis, reproductive cycle, spawning, relative weight of flesh, and onset of sexual maturity of the murex shell, Ceratostoma rorifluum, collected from the rocky intertidal zone of Daehang-ri, Buan-gun, Jeollabuk-do, Korea were investigated monthly from January to December 2005 both cytologically and histologically. The gonads were widely placed on the digestive gland located in the posterior spiral fleshy part in the shell. C. rorifluum had separate sexes, and was an internal fertilizer. The sex ratio of females to males was approximately 1:1. The ovary and testis contained a great number of oogenic follicles and spermatogenic tubules, respectively. The oogonia and fully ripe oocytes were $15-19{\mu}m$ and $150-160{\mu}m$ in diameter, respectively, and the cytoplasm of the ripe oocytes contained a number of yolk granules. The relative weight of flesh reached a maximum in August($39.35{\pm}0.40%$), and then decreased rapidly in November($32.75{\pm}1.20%$). The percentages of female and male snails at first sexual maturity with shell heights ranging from 12.1-14.0 mm were 60.0% and 52.9%, respectively, while 100% of the snails of both sexes with shell heights over 18.1 mm were reproductively active. Based on the gonadal development and histological observations, the reproductive cycle of the snail could be categorized into five successive stages: early active(December to May), late active(March to July), ripe(June to September), spawning(July to October), and recovery(October to March). C. rorifluum spawned once a year between July and October, and the majority of spawning occurred in September when the seawater temperature exceeded $23.5^{\circ}C$.