• Journal of Plant Biology
• /
• 제18권3호
• /
• pp.129-134
• /
• 1975

It was studied of relation between biomass of reed communities (Phragmitis communis) and several environmental factors concerned with such as chlor ine, pH, humus content in soil and depth of seawater submerged. Two sites where were the different geographical conditions were set up. One site had two plots: H plot, at theshallows of seawater, was not submerged except at full tide or at heavy rainfall, and M plot, at medium depth of seawater, submerged at every common tide at inside of a bank along the west seashore of Mu-An-peninsula. The other site also two plots: M' plot, at medium depth, submerged about 10 hours at each tide, and L plot, at deep seawater submerged every tims at tide at the outside of a bank along the eastside estuary of Youngsan river. Maximum standing crop of the reed community was shown on 25th of June: biomass at H M, M' and L plot were respectively 4.65, 3.60, 0.98, and 0.67 kg dry weight per $m^2$. Density of individual at H, M, M' and L plot was 67, 78, 244 and 333 plants per $m^2$. Net production of the terrestrial parts of rred community on the outside of the bank were lesser as much as a sixth than that on inside, but the density of the plant on outside of the bank was higher as much 4 or 5 times than that on inside. It was assumed that the growth of reed plant was inhibited by high chlorine, high pH, less humus in soil and submergence of seawater for long period.

• 한국환경과학회지
• /
• 제30권7호
• /
• pp.585-595
• /
• 2021

We used seawater temperature data, measured in the Garolim Bay, to analyze temperature variation on an hourly and daily basis. Lagrange's interpolation using before and after data was applied to restore nonconsecutive missing temperature data. The estimated error of the data restoration was 0.11℃. Spectral analyses of seawater temperature showed significant periodicities of approximately 12.4 h (semidiurnal tide) and 15.0 d (long-period tide), which is close to those of M₂ and M_f partial tides. Variation in seawater temperature was correlated more with tidal height than with air temperature around the Garolim Bay. In June and December, when the seawater temperature difference between the inside and outside of the Garolim Bay was very large, the periodicities of 12.4 h and 15.0 d were highly prominent. These results indicate that the exchange of seawater between the inside and outside of the Garolim Bay induced variations in seawater temperature owing to tide. Understanding temperature variation because of tide helps to prevent abnormal mortality of cultured fish and to predict seawater temperature in the Garolim Bay.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.283-284
• /
• 2006

The ship performs heat exchange using seawater to keep main engine and auxiliary machinery at optimum temperature. In heat exchanger, refrigerant located outside of copper tube is cooled by seawater flowing through inside of copper tube. On the other hand, seawater erosion and corrosion nay occasionally cause the corrosion of the copper tube in A/C(Air Conditioner) condenser. This corrosion of copper tube makes seawater and refrigerant mixed, seriously damaging A/C system. In this study, accordingly, the exact ive mechanism of the corrosion on the condenser entailing serious problems occasional is investigated through the electrochemical polarization experiments on the condenser's component materials. According to the experiments, the corrosive procedures on the copper tube was verified by the fact that passive film of the copper tube surface which is destroyed by the pressure of sucked seawater, is damaged by the corrosive ingredients in the seawater.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.1-11
• /
• 2000

A study on the variational characteristics of water quality and phytoplankton biomass by principal component analysis(PCA) was carried out in Kogum-sudo from February to October in 1993. We analyzed PCA on biological factors such as chlorophyll a and phytoplankton cell numbers for centric and pennate diatoms, phytoflagellates, and total phytoplankton as well as physico-chemical factors as water temperature, salinity, transparency, dissolved oxygen(DO), saturation of DO, apparent oxygen utilization (AOU), chemical oxygen demand(COD), nutrient (ammonia, nitrite, nitrate, phosphate and silicate), N/P ratio and suspended solid(SS). The source of nutrients supply depended on the mineralization of organic matters and inputs of seawater from outside rather than runoff of freshwater. The phytoplankton biomass was changed within short interval period by nutrients change. And it was controlled by the combination of several environmental factors, especially of light intensity, ammonia and phosphate. The marine environmental characteristics were determined by the mineralization of organic matters in winter, by runoff of freshwater including high nutrients concentration in spring, by ammonia uptake and high phytoplankton productivity in summer, and phosphate supplied input seawater from outside of Kogeum-sudo in autumn. And Kogum-sudo was separated with 2 regions by score distributions of PCA. That is to say, one region was middle parts of straits which was characterized by the mixing seawater and the accumulated organic matters, other one region was Pungnam Bay and the water around Kogum Island which was done by high phytoplankyon biomass and productivity year-round.

• 한국해안·해양공학회논문집
• /
• 제30권6호
• /
• pp.253-262
• /
• 2018

진동수주형(OWC) 파력발전구조물(WEC)은 진동수주실 내의 수위진동에 의해 발생된 공기흐름을 Power-Take-Off (PTO) 시스템을 통해 전기에너지로 회수하는 시스템이다. 일반적으로 PTO 시스템에서 높은 공기유속을 획득하기 위해서는 해수에 비해 상대적으로 적은 단면적을 갖는 공기실이 요구되므로 정확한 공기유속을 모의하기 위해서는 3차원적인 해석이 요구된다. 본 연구에서는 불규칙파동장을 대상으로 해수소통구를 구비한 진동수주형 파력발전구조물의 동적응답을 수치해석적으로 검토하였다. 수치해석에는 오픈소스 기반의 OpenFOAM 및 FOAM 확장 커뮤니티를 위한 파동장 해석을 위해 개발된 OLAFLOW를 적용하였다. 선행연구와 동일한 형상의 해수소통구와 OWC-WEC에 불규칙파랑이 입사한 경우 공기실 내에서 3차원공기흐름과 구조물 주변에서 파랑변형 및 해수소통구 내에서 3차원해수흐름 등에 관한 변동특성을 논의하였다. 이로부터 유의파에 대한 Ursell 수가 클수록 공기실 내 최대 공기흐름속도가 증가하며, 공기실 내부에서 외부로 유출되는 공기속도가 외부에서 공기실 내부로 유입되는 공기속도보다 더 크다는 사실을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.883-890
• /
• 2005

The industrial growth and the raised living quality have led to the massive energy consumption. As a result. the polluted environment and the limited amount of energy resources emerged as serious problems to be resolved in 21st century. Especially, in the case of Korea whose imported energy dependency rate is 98.2$\%$ in 2003 and constantly increasing every rear. more than 24$\%$ of overall energy consumption is for housing and commercial use. In order to cope with the shortage of natural energy resources, it is inevitable to develop alternative sustainable energy resources including seawater heat. so that they can replace existing resources. The heat transfer air velocity 3.5 m/s is proper to consideration with the body the pipe size 200A is more suitable than look due to the air velocity quantify and the ratio of pipe surface area. And the error between experimental data with simulation is below 5.34$\%$ so the suggested equation for calculating heat transfer capacity can be used. Therefore out of many methods utilizing seawater heat. this work Presents the efficiency of using sea water heat as a resource for air-conditioners which can be converted from the outside air through the air-to-heat conversion tube . Consequently. this method provides pretty reasonable energy efficiency.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.767-773
• /
• 2017

Infrared stealth is an important technology for naval ships. This technology helps improve the anti-detection performance and survivability of naval ships. In general, the infrared signature of naval ships are categorized into internal and external heat source. External signature are generated by ship surface heating by solar flux as well as the complicated heat transfer process with the surrounding weather condition. Modern naval ships are equipped with seawater injection nozzles on the outside for nuclear, biological and, chemical, and these nozzles are used to control external signature. Wide nozzle placement intervals and insufficient injection pressure, however, have reduced seawater dispersion area. To address this problem, nozzle installation standards must be established. In this study, an actual-scale experimental system was implemented to provide the evidence for nozzle installation standards in order to reduce the infrared signature of naval ships. In addition, the environmental conditions of the experiment were set up through computational fluid dynamics considering the ocean climate data and naval ship management conditions of South Korea. The dispersion distance was measured using a high-resolution thermography system. The flow rate, pipe pressure, and dispersion distance were analyzed, and the evidence for the installation of seawater injection nozzles and operation performance standards was suggested.

• Membrane and Water Treatment
• /
• 제1권1호
• /
• pp.13-37
• /
• 2010

The performance of an electrodialyzer for concentrating seawater is predicted by means of a computer simulation, which includes the following five steps; Step 1 mass transport; Step 2 current density distribution; Step 3 cell voltage; Step 4 NaCl concentration in a concentrated solution and energy consumption; Step 5 limiting current density. The program is developed on the basis of the following assumption; (1) Solution leakage and electric current leakage in an electrodialyzer are negligible. (2) Direct current electric resistance of a membrane includes the electric resistance of a boundary layer formed on the desalting surface of the membrane due to concentration polarization. (3) Frequency distribution of solution velocity ratio in desalting cells is equated by the normal distribution. (4) Current density i at x distant from the inlets of desalting cells is approximated by the quadratic equation. (5) Voltage difference between the electrodes at the entrance of desalting cells is equal to the value at the exits. (6) Limiting current density of an electrodialyzer is defined as average current density applied to an electrodialyzer when current density reaches the limit of an ion exchange membrane at the outlet of a desalting cell in which linear velocity and electrolyte concentration are the least. (7) Concentrated solutions are extracted from concentrating cells to the outside of the process. The validity of the computer simulation model is demonstrated by comparing the computed results with the performance of electrodialyzers operating in salt-manufacturing plants. The model makes it possible to discuss optimum specifications and operating conditions of a practical-scale electrodialyzer.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.2021-2025
• /
• 2009

새만금 방조제 물막이 공사 마무리 직후인 2006년 5월부터 11월까지 4회의 조사를 통해 방조제 안팎의 식물플랑크톤 군집구조에 의한 식물수문적 수역특성을 연구하였다. 집괴분석 결과 육수역과 해수역으로 크게 양분되는 모습을 보여주었고 조사시기별로 조사정점간의 유사도는 다소간의 변동이 지속되었다. 특히 여름철에는 같은 해수역임에도 불구하고 방조제를 경계로 내부수역 및 외부수역으로 확연히 구분되는 식물수문적 수역 분리를 보여주었다. 물막이 공사 후 새만금호는 염분이 감소하고 수질환경이 변화되어 식물플랑크톤의 군집조성에 의한 식물수문특성이 시기별로 변화가 지속되는 것으로 보인다.

• 수산해양기술연구
• /
• 제31권4호
• /
• pp.413-422
• /
• 1995

각종 환경 조건에서 진동 캐비테이션 침식-부식 시험 장치에 의해 연강(SS41)의 캐비테이션 침식-부식 손상 거동에 관한 연구를 한 결과 다음과 같은 결론을 얻었다. 1) 해수 중에서 캐비테이션 침식-부식 손상 거동은 중앙부와 테두리 부에서 거의 비슷한 정도로 발생하여 성장되지만, 증류수 중에서는 테두리부에서 손상이 먼저 발생한 다음 중앙부에도 손상이 점차 일어난다. 2) 비저항이 낮은 수도수 중의 캐비테이션 침식-부식 손상은 초기에는 비저항이 높은 증류수중에서의 것보다 증가하지만 시간이 경과하면서 CaCO 하(3)의 피막 형성에 의해 둔화된다. 3) 케비테이션 침식-부식 손상 특성은 잠복기, 증가기, 감소기 및 안정기의 4단계로 구분된다.