• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.48-52
• /
• 2003

Low melting crystalline solder glasses for CRT sealing were prepared from the composition of PbO 73.0~75.5 wt%, ZnO 12~15 wt%, $B_2O_3$ 7.0~9.0 wt%, BaO 1.5~3.5 wt%, $P_2O_5$ 1.0~2.5 wt%, $Bi_2O_3$ 0.5~20 wt%. The nucleation and crystallization of the crystalline solder glasses were studied by DTA, SEM and XRD. $2PbO{\cdot}ZnO{\cdot}B_2O_3$ crystalline phase was formed from glass matrix by heat-treatment of glass frits Crystalline solder glasses developed from this paper have good firing condition of $430{\sim}440^{\circ}C$ for 10min and good physical properties

• Restorative Dentistry and Endodontics
• /
• v.15 no.1
• /
• pp.97-105
• /
• 1990

When conventional root canal treatment is failed or contraindicated, retrograde root canal filling following apicoectomy is a valuable procedure, aimed at hermetically sealing the root canal against leakage of irritants from the canal into the periapical tissue. In this in vitro investigation, to analyze apical microleakage electrochemically in teeth with different retrograde filling materials and preparation types, single - rooted tooth was cut 2mm from the apex and each Class I and Slot preparation was prepared. Experimental groups : Group 1. Amalgam filling with cavity varnish in Class I preparation Group 2. Scotchbond 2+Silux filling in Class I preparation Group 3. Gutta percha filling with ZOE cement in Class I preparation Group 4. Amalgam filling with cavity varnish in Slot preparation Group 5. Scotchbond 2+Silux filling in Slot preparation Each specimens was immersed in 1% solution of KCl, and applied a potential of 9V external power supply. Measurements of the current flow were obtained at 1, 2, 3, 7, 9, 12, 14, 18, 21, 25 and 28 day after immerson. Marginal microleakage were compared and evaluated. The results were as follows ; 1. The group filled with composite resin with dentin bonding agent shows lower apical microleakage value than the group filled with amalgam following varnish application (P<0.01). 2. In the group filled with gutta percha, apical microleakage value was the hightest 3. There was no significant difference between Class I cavity and Slot type cavity regardless of the used materials.

• Composites Research
• /
• v.35 no.6
• /
• pp.402-411
• /
• 2022

In this study, the channels-contained hybrid membranes have been fabricated through the incorporation of glass fibers and GO sheets (GO/glass fibers, GG), or a mixture of chitosan/GO (CS/GO/glass fibers, CGG), as hybrid membranes using in organic dye removal. The material properties are well investigated the terms in the morphological, chemical, crystal, and thermal characterizations for verifying interactions in their formed structure. These hybrid membranes have been fitted well in pseudo-second order and Langmuir models that are associated with chemical adsorption and a monolayer approach, respectively. The highest adsorption ability of methylene blue and methyl orange reached 59.40 mg/g and 229.07 mg/g (GG); and 287.47 mg/g and 252.91 mg/g (CGG), which is more enhanced than that of previous GO-based other adsorbents. Moreover, the dye separation on these membranes could be favorable to superb sealing and trapping dye molecules from water instead of only the dye connection occurring on their surface, regarding the physically sieving effect. The membranes can also be reused within two and three adsorbing-desorbing cycles on the GG and CGG ones, respectively. These membranes can become future adsorbents to be applied for wastewater treatment due to their structural features.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.81-82
• /
• 2022

Al and Zn are used to protect the steel structures from corrosion. In the present studies, 15Al-85Zn alloy wires has been used for the deposition of coating by arc thermal spray process. Moreover, this process of coating exhibited severe defects formation, therefore, this coating was post-treated with different concentrations i.e. 0.05, 0.1 and 0.5M sodium hexa meta phosphate (Na6[(PO3)6]: SHMP) to fill to defects of deposited coatings and assessed their corrosion resistance in 3.5 wt.% NaCl solution with exposure periods. After the treatment, the porosity of the coating reduced significantly by formation of composite oxide films onto the coating surface. Initially, 0.5 M SHMP treated coating exhibited highest in total impedance due to significant reduction of porosity but once the exposure periods are extended, the composite oxides are dissolved, thus, total impedance is decreased.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.6 no.2
• /
• pp.9-13
• /
• 2023

Purpose: In this study, we would like to make a technical proposal to solve the odor problem in pig houses. Through this, we would like to suggest an effective way to reduce the odor generated in the pig house as a solution to civil complaints. Research design, data and methodology: Conduct direct visits to pig farms where many civil complaints about bad odor occur, and identify the problems of each farm. Identify elements related to odor control, such as structure, facility, equipment, odor management method, and ventilation type. Through this, the technology to be applied to reduce odor and the solution to the odor problem are presented. Results: The results of major improvements are as follows: 1. Improvement of the structure of the barn or composting shed to an airtight type 2. Improvement of the pig manure treatment structure using the slope inside the barn 3. Establishment of ventilation and cooling systems 4. Automation of the mist spray system. Conclusions: As a result, as practical measures, sealing of facilities using winch curtains, construction of air conditioning systems using negative pressure ventilation, and management systems using AIoT systems were presented. It is judged that this study can be helpful in determining the grievances caused by civil complaints of tenant livestock farms and the direction of facility improvement in the future.

• Journal of the Korean Society of School Health
• /
• v.14 no.1
• /
• pp.73-81
• /
• 2001

The purpose of this study was to collect basic data for the development of effective oral health education program in elementary school. The subjects in this study Were 604 fourth-year, fifth-year and sixth-year students of an elementary school in Seoul, Oral health awareness and behaviors were surveyed and analyzed. The findings of this study were as follows: 1. The most common time for toothbrushing was after dinner(62.0%) and before bedtime(62.3%). By school year, the largest number who brushed their teeth after dinner were fourth and fifth graders while the greatest number who did so after breakfast were sixth graders. Seventy-four percent of respondents brushed the teeth twice or more a day. By school year, the fifth-year students brushed their teeth the least while girls outperformed the boys in daily toothbrushing frequency(p<0.05). Regarding the intake of cariogenic food, 62.1% took that kind of food once or more a day. By school year, the fifth graders took the most (p<0.05), and girls took more cariogenic food than the boys(p<0.05). 2. Ninety percent of the respondents had visited a dental clinic. By grade, the sixth-year students had visited a dental clinic more frequently and girls more frequently than boys. Eighty percent of the respondents visited a dental clinic to receive treatment but just 12.3% visited a dental clinic to prevent oral diseases. Concerning the fear of dental treatment, only 14.4% expressed fear. School year made no difference, yet the percentage of girls who experienced fear was higher than that of boys(p<0.05). Regarding preventive treatment, 39.7% experienced pit and fissure sealing and 24.2% experienced the application of fluorides. All the students hadn't much experience in preventive treatment regardless of school year -- gender didn't make a difference. 3. Fourty-six percent of respondents had a preference for the fluoride mouth rinsing program; 38.4% wanted that program to continue. As to the reason for preference, 38.2% preferred it because of the prevention of dental caries, 43.0%, the largest percentage, didn't favor it because they found it too much trouble to do(some of the respondents gave two different answers). 4. Despite an increase in the frequency of toothbrushing at the right time, they still took cariogenic food frequently. Their visit to a dental clinics also aimed at treatment more than at prevention, and they had very narrow experience of preventive treatment Furthermore, the fluoride mouth rinsing program failed to draw their interest Therefore, it is recommended that a successful oral health education program should be developed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.2
• /
• pp.188-196
• /
• 2015

Endodontic management of an immature permanent tooth with dens invaginatus poses a challenge to efficient treatment planning for the clinicians. Because it is difficult to shape, disinfect, and seal the canal space effectively, teeth with complex root canal structures often require particularly extensive and thorough treatment approaches. The purpose of this case report was to share clinical insight from the results of short-term follow-ups after regenerative endodontic treatment with a dens invaginatus. Two immature maxillary lateral incisors with Oehlers type I and III dens invaginatus and infected necrotic pulp were treated using regenerative endodontic procedures. For the type III dens invaginatus case, an unusual approach toward redesigning the complex internal structure was taken, in order to have sufficient infection control and sealing. Cone-beam computed tomography (CBCT) and a surgical operating microscope were used to aid visualization and treatment. As a result, regenerative endodontic treatment appears to be effective for managing immature permanent teeth with complex dens invaginatus, and can lead not only to clinical and radiographic resolution, but also increased thickness of the dentinal walls.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.216-227
• /
• 2007

Statement of problem: For the long-term success of removable partial dentures, the bonding between metal framework and denture base resin is one of the important factors. To improve bonding between those, macro-mechanical retentive form that is included metal framework design has been generally used. However it has been known that sealing at the interface between metal framework and denture base resin is very weak, because this method uses mechanical bonding. Purpose: Many studies has been made to find a simple method which induces chemical bond, now various bonding system is applied to clinic. In this experiment, shear bond strengths of heat-cured denture base resin to the surface-treated Co-Cr alloy were measured before and after thermocycling. Chemically treated groups with Alloy $Primer^{TM}$, Super-Bond $C&B^{TM}$, and tribochemically treated group with $Rocatec^{TM}$ system were compared to the beadtreated control group. The data were analyzed with two-way ANOVA. Result: 1. Shear bond strength of bead-treated group is highest, and Alloy $Primer^{TM}$ treated group, Super-Bond $C&B^{TM}$ treated group, RocatecTM system treated group were followed. Statistically significant differences were found in each treated group(p<0.05). 2. Surface treatment and thermocycling affected shear bond strength(p<0.05), however there was no interaction between two factors(p>0.05). 3. Shear bond strengths of bead-treated group and Alloy $Primer^{TM}$ treated group showed no statistically significant difference before and after thermocycling(p>0.05), and those of Super-Bond $C&B^{TM}$ treated group and $Rocatec^{TM}$ system treated group showed statistically significant difference after thermocycling(p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.310-317
• /
• 2009

Dens evaginatus is a dental anomaly involving an extra cusp or tubercle that protrudes from the occlusal surface of the affected tooth. The prevalence of dens evaginatus is 1 to 4 percent, and dens evaginatus is observed most commonly in premolars. It can be worn or fractured easily, resulting in pulpal exposure, pulpal infection, loss of vitality, facial infection and osteomyelitis. Since the tooth frequently has the immature apex when the tubercle is fractured, there is difficulty in treatment. Although calcium hydroxide is widely used for pulp treatment of an immature permanent tooth, several alternatives have been suggested to reduce patient's appointments. Mineral trioxide aggregate is considered biocom-patible and has excellent marginal sealing ability. In addition, it can minimize patient's visits. In this case report, apexification with MTA was attempted on the immature premolars in patients with cellulitis patient, caused by pulp necrosis due to dens evaginatus. Favorable clinical and radiologic results were achieved. In one case, continued root formation was observed.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.4
• /
• pp.186-189
• /
• 2011

PURPOSE. Porcelain fused to metal (PFM) crowns provide the best treatment option for teeth that have a large or defective restoration. More than 20% of teeth with PFM crowns or bridges require non-surgical root canal treatment (NSRCT). This may be due to the effect of restorative procedures and the possible leakage of bacteria and or their by-products, which leads to the demise of the tooth pulp. Thus, this study was planned to compare the ability of the restorative materials to seal perforated PFM specimens. MATERIALS AND METHODS. The study evaluates the ability of amalgam, composite or compomer restorative materials to close perforated PFM specimen's in-vitro. Ninety PFM specimens were constructed using Ni-Cr alloys and feldspathic porcelain, and then they were divided into 3 groups: amalgam (A), composite + Exite adhesive bond (B) and compomer + Syntac adhesive bond (C). All the PFM samples were embedded in an acrylic block to provide complete sealing of the hole from the bottom side. After the aging period, each group was further divided into 3 equal subgroups according to the thermocycling period (one week for 70 cycles, one month for 300 cycles and three months for 900 cycles). Each subgroup was put into containers containing dye (Pelikan INK), one maintained at $5^{\circ}C$ and the other at $55^{\circ}C$, each cycle for 30 sec time. The data obtained was analyzed by SPSS, 2006 using one way ANOVA test and student t-test and significant difference level at (P<.01). RESULTS. The depth of dye penetration was measured at the interfaces of PFM and filling materials using Co-ordinate Vernier Microscope. The lowest levels of the dye penetration for the three groups, as well as subgroups were during the first week. The values of dye leakage had significantly increased by time intervals in subgroups A and C. CONCLUSION. It was seen that amalgam showed higher leakage than composite while compomer showed the lowest level of leakage.