• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.337-341
• /
• 2002

In these day, micro systems have gained attention with development of advance technologies. Researches about the fabrication of micro parts are actively made in the whole world. Among the researches, technology for micro injection molding machine is one of the key issues for fabrication of micro parts. In this study, we developed a micro injection molding machine for micro parts. To achieve this, injection unit was constructed using a screw with diameter of 12 mm. Clamping unit with clamping force of 1.75 kgf/$\textrm{cm}^2$ was constructed. Also verification test fur fabrication of micro parts was performed. It was performed that the micro injection molding machine can fabricate micro parts based on the result.

• Clinics in Shoulder and Elbow
• /
• 제2권2호
• /
• pp.138-142
• /
• 1999

Coracoclavicular ligament is main restraint to superior instability of the distal clavicle. Coracoacromial ligament, extensor tendon of toe, palmaris longus tendon, and Dacron tape have been used to reconstruct coracoclavicular ligament. We used semitedinosus tendon to reconstruct coracoclavicular ligament. The semitendinosus tendon was harvested as a usual fashion. After the distal clavicle and coracoid process were exposed, a hole of six millimeter diameter was made on the center of whole thickness of the distal clavicle. A malleolar screw was fixed from distal clavicle to coracoid process to maintain the reduced position of the acromioclavicular joint. The leading suture of tendon graft was passed through the hole of the distal clavicle and looped under the coracoid process. After leading portion of ten­don graft was looped over the clavicle, sutures were made between each end of the tendon graft with nonabsorbable suture materials.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.90-100
• /
• 2000

The present paper investigates the elasto-plastic buckling of ball-jointed single layer latticed domes considering the connection characteristics. The domes are composed of tubular member elements, ball joints and connectors. To judge yielding of the member, the ends and central part of tubular member elements are assumed as five elasto-plastic springs. Elasto-plastic buckling load can be identified the yielding load of estimated member As a numerical analysis technique, loading incremental method based on the Newton-Raphson method is used. The effects of connection characteristics are investigated by the following points; (1) the length of rigid zone, (2) looseness of screw, (3) diameter of connector Finally, it is emphasized that the connection characteristics as well as the material non-linearity have significant effects upon the buckling toad of domes.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.462-467
• /
• 2002

New methods for screw and spline production has been developed recently by Japan and other developed countries in the basis of Rolling Dies work to cut down the production cost. These methods give us high precision of the products. But we in Korea mostly import Dies for manufacturing forming products. It is thought that if we don't develop our own technology for Rolling Dies, we will have to spend much money for importing Forming concerned equipments. In this paper, we designed the rolling dies based on the diameter of material and calculated the proper number of teeth of gear to establish desirable method for Rolling dies. And the result is shown after manufacturing Involute spline with the rolling dies.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.173-175
• /
• 2003

At the low temperature of $950^{\circ}C$ the $\mu\textrm{m}$-sized whisker growth during the catalytic CVD of pyrolytic carbon from methane with $H_2$- and Ar-gas on quartz substrate with NiO powder was found in this work. In the preliminary study it was observed from pure methane pyrolysis without catalyst at the high temperature $1500~1700^{\circ}C$. If the growth whisker should be stopped at initial stage, about 20 min. of the methane pyrolysis, it would be nanosized whisker growth. The screw growth mechanism and unique mechanical properties of whisker for composites were also recognized. If the pyrolysis would be continued, we could found also spiral growth of whistlers with diameter of about 1, 5 mm. The large length of whisker was about 10 cm in 20 minute.

• 수산해양기술연구
• /
• 제43권3호
• /
• pp.222-231
• /
• 2007

This paper represents a basic statistical examination on the navigability of ocean-going ship from the point of estimating the time lasting period when propeller racing occurred by using the basic probability theory and the statistics. The propeller racing is one of the most important seakeeping qualities in relation to the safety of the main engine and shafting system. The trend of the racing has been mainly investigated in order to estimate allowable maximum propeller diameter, operation of ocean-going ships, etc.. In those studies, the propeller racing generally and mainly means the situation (propeller exposed) in which the relative motion amplitude between ship hull and wave surface would exceed a depth of point in rotary disk propeller. Therefore, it seems that the magnitude of the amplitude and its exceeding frequency of propeller racing have been examined as a principal subject of study as usual. However, the time during which the amplitude exceeds the depth of point, that is, the propeller exposes in the air, must be also one of most important factor affecting the trend of propeller racing. Then, this paper proposes a new practical method for estimating the time lasting of exposed propeller related to propeller racing in rough-confused seas on the basis of the linear strip theory and the statistics. And, numerical examples of estimating the propeller racing probability are given for four wide ship forms. Finally the usefulness of the proposed method for predicting propeller racing based on the time lasting period is discussed.

• Journal of Periodontal and Implant Science
• /
• 제36권3호
• /
• pp.661-671
• /
• 2006

The purpose of this study was to evaluate cumulative survival rate (CSR, %) of mandibular posterior single tooth implants replaced with ITI SLA (sand-blasted, large-grit, acid-etched) implant system and compare the CSR between first and second molar. The findings from the results were as follows; 1. Total of 158 implants were inserted into 147 patients. 68 patients were males, 79 patients were females and their mean age was 47.8 years. 98 implants were placed in first molar area and 60 implants were placed in second molar area. In terms of diameter, implants with wide diameter over 4.8mm dominated (91.1%). Implants with length over lOmm were used (96.2%). 2, In the two cases, there was a slight transient numbness which recovered within 1-2 months. Nine SynOcta screw type abutments demonstrated screw loosening, There were ten cases of crown fallen-out from decementation. 3. Only one failed out of 158 implants. The CSR was 99.4%. The CSRs for first molar and second molar were 99% and 100%, respectively. From the results, it was concluded that single tooth replacement implant in the mandibular posterior area, might be considered as the effective treatment modality comparable to the conventional crown and bridge.

• 한국응용곤충학회지
• /
• 제45권1호
• /
• pp.75-78
• /
• 2006

곤충 사육용으로 개발되어 있는 인공사료는 습체형으로 사료의 조제 및 사육에 많은 노력이 들고 불편함이 있어 본 연구에서는 나비목 곤충용 인공사료의 펠렛화를 시도하였다. 펠렛사료의 제조에는 이축압출기를 이용하였는데 바렐 내의 압력을 높이기 위해 2축의 앞부분에 역스크류를 2개씩 장착하였고, 수차례의 조정 끝에 메인모터 속도 300rpm, 피드모터 속도 228rpm, 사료조제시의 첨가물량 $75m{\ell}/min$로 맞추었고 이때 사출공의 직경은 5mm의 것을 사용하였다. 사용한 사료의 메뉴는 기존의 것을 첨가량 및 첨가비율에서 다소 조정하였으며 최종적으로 사료의 점착성을 개선하기 위한 새로운 조성분으로 젤라틴을 첨가함으로 사료의 물리성을 획기적으로 개선할 수 있었다. 조제된 사료의 적정 수분흡수량을 검토한 결과 사료 무게의 $1.2{\sim}1.5$배의 물을 첨가하는 것이 가장 양호하였다. 이 사료를 파밤나방 및 담배거세미나방에게 각각 공시하여 사육한 결과 전반적으로 기존의 습체형 인공사료에 비해 사육성적이 떨어지지 않아 추후 곤충용 차세대 인공사료로서 조제하여 공급할 수 있을 것으로 판단되어 펠렛사료 조제법을 특허출원 하였다.

• 대한치과보철학회지
• /
• 제42권6호
• /
• pp.664-670
• /
• 2004

Statement of problem. One of the common problems of dental implant prosthesis is the loosening of the screw that connects each component, and this problem is more common in single implant-supported prostheses with external connection. Purpose. The purpose of this study was to examine the changes of detorque values of abutment screws with external connection in different abutment heights. Materials and methods. After cyclic loading on three different abutment heights, detorque values were measured. Abutments were retained with titanium abutment screws tightened to 30 Ncm (30.5 kgmm) with digital torque gauge as recommended by the manufacturer. Replacing abutments, implants and titanium abutment screws with new ones at every measurement, initial detorque values were measured six times. In measuring de torque values after cyclic loading, Avana Cemented Abutments of 4.0 mm collar, 7.0 mm height (Osstem Co., Ltd., Seoul, Korea) were used with three different lengths of 5.0, 8.0, 11.0 mm. Shorter abutments were made by milling of 11.0 mm abutment to have the same force-exercised area of 4.5 mm diameter. Sine curve force (20N-320N, 14Hz) was applied, and detorque values were measured after cyclic loading of 2 million times by loading machine. Detorque values of initial and after-loading were measured by digital torque gauge. One-way ANOVA was employed to see if there was any influence from different abutment heights. Results. The results were as follows: 1. The initial detorque value was 27.8$\pm$0.93 kgmm, and the ratio of the initial detorque value to the tightening torque was 0.91(27.8/30.5). 2. Measured detorque values after cyclic loading were declined as the height of the abutment increased, that was, 5.0 mm; 22.3$\pm$0.82 kgmm, 8.0 mm; 21.8$\pm$0.93 kgmm, and 11.0 mm; 21.3$\pm$0.94 kgmm. 3. One-way ANOVA showed no statistically significant differences among these (p>0.05). 4. Noticeable mobility at the implant-abutment interface was not observed in any case after cyclic loading at all.

• Journal of Korean Neurosurgical Society
• /
• 제41권2호
• /
• pp.111-117
• /
• 2007

Objective : The objective of this study was to validate the effects of a titanium mesh cage and dynamic plating in anterior cervical stabilization after corpectomy. Methods : A retrospective study was performed on 31 consecutive patients, who underwent anterior cervical reconstruction with a titanium mesh cage and dynamic plating, from March 2004 to February 2006. Twenty-four patients had 1-level and 7 had 2-level corpectomies. Ten patients underwent surgery with a cage of 10-mm diameter and 21 with 13-mm diameter. Neurological status and outcomes were assessed according to Odom's criteria. Sagittal angle, coronal angle, settling ratio, sagittal displacement, and cervical lordosis were used to evaluate the radiological outcomes. Results : In overall, 26 [83.9%] of 31 showed excellent or good outcomes. Thirteen percent [4 cases] of the patients developed surgical complications, such as hoarseness, transient dysphagia, or nerve root palsy. Seven [22.6%] patients had reconstruction failure:5 [20.8%] in the 1-level corpectomy group and 2 [28.5%] in the 2-level corpectomy group. Revisions were required in 2 patients with plate pullout due to significant instability. However, none of 5 patients who demonstrated cage displacement or screw pullout, underwent a revision. Radiographs revealed bony consolidation in 96.3% of the patients, including 6 patients with implantation failure during the follow-up period. Conclusion : Based on our preliminary results, the titanium mesh cage and dynamic plating was effective for cervical reconstruction after corpectomy. The anterior cervical reconstruction performed with dynamic plates is considered to reduce stress shielding and greater graft compression that is afforded by the unique plate design.