• Atmosphere
• /
• v.22 no.1
• /
• pp.47-55
• /
• 2012

The characteristics of flow and pollutant dispersion for fire scenarios in an urban area are numerically investigated. A computational fluid dynamics (CFD) model coupled to a mesoscale weather research and forecasting (WRF) model is used in this study. In order to more accurately represent the effect of topography and buildings, the geographic information system (GIS) data is used as an input data of the CFD model. Considering prevailing wind, firing time, and firing points, four fire scenarios are setup in April 2008 when fire events occurred most frequently in recent five years. It is shown that the building configuration mainly determines wind speed and direction in the urban area. The pollutant dispersion patterns are different for each fire scenario, because of the influence of the detailed flow. The pollutant concentration is high in the horse-shoe vortex and recirculation zones (caused by buildings) close to the fire point. It thus means that the potential damage areas are different for each fire scenario due to the different flow and dispersion patterns. These results suggest that the accurate understanding of the urban flow is important to assess the effect of the pollutant dispersion caused by fire in an urban area. The present study also demonstrates that CFD model can be useful for the assessment of urban environment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.3
• /
• pp.26-38
• /
• 2006

For both a healthy environment and sustainable development, we frame a habitat assessment method, concerning biodiversity and physical characteristics. With the method, we set up and extract conservation areas from Peace Valley Resort Development Areas which can function as habitats. Absolute and relative assessment items which are the size of area, habitation of species with conservation value, distribution of communities, functions of habitats, ratio of non-native plants, connectivity of habitats, vegetation layers of forests and age of forests, and water systems are considered on newly extracted conservation areas, and the habitat value assessment was calculated on the items in a 3-point scale. By comparing and examining 3 existing proposals for extracted conservation areas, we assess existing proposals, make an alternative proposal, and try to verify the possibility of applicability to extracted conservation areas. Proposal A and C must not be adopted since almost all conservation areas would be developed in the proposals. Proposal B, consisting of 53% development areas and 47% non-development areas, does not have enough development areas, so high density building arrangements should be encouraged in order to preserve conservation areas. Therefore, proposal B would be the best in ecological terms among the 3 proposals, if 3 conditions are considered : 1) new extracted conservation areas should be conserved; 2) 10~15m wide green-zones on both sides of the water system, which can play a role as ecological corridors, should be considered in development areas; 3) building arrangement should not interrupt the ecological corridors.

• Ocean and Polar Research
• /
• v.26 no.4
• /
• pp.559-565
• /
• 2004

Total magnetic field measurements were performed to study paleomagnetism of three seamounts (OSM7, OSM8-1, and OSM8-2) to the northwest of the Marshall Islands in the western Pacific. The study area is located at the Ogasawara Fracture Zone which is a boundary between the Pigafetta and East Mariana basins. The magnetic parameters and paleopoles of three seamounts were derived from inversion of the measured magnetic field. The goodness-of-fit ratio of OSM7 is too low to be included to the estimation of parameters. The complex magnetic anomalies of center, scarcity of flank rift zones and steep slope at OSM7 suggest that the multiple intrusions of magma converge into the center of volcanic edifice. Inclination calculated from the magnetic anomalies of OSM8-1 and OSM8-2 is $-41.2^{\circ}$, and the paleolatitude calculated from the inclination is $23.6^{\circ}S$. The corresponding paleopoles for OSM8-1 and OSM8-2 are $(24^{\circ}42'W,\;48^{\circ}54'N)\;and\;(18^{\circ}18'W,\;48^{\circ}30'N)$, respectively. In comparison with the apparent polar wander path (APWP) of the Pacific plate, the paleopoles are close to 129-Ma pole. The paleopoles and paleolatitudes of OSM8-1 and OSM8-2 suggest that they were formed at similar time and location. The seamounts have drifted northward about $41^{\circ}$ from the paleolatitude to present latitude of seamounts.

• Analytical Science and Technology
• /
• v.33 no.4
• /
• pp.197-207
• /
• 2020

The current comparison methods with scoring systems that are used to compare visualized latent fingerprints (LF) have disadvantages. Evaluators using these methods are prone to make errors and fail to discriminate LFs correctly to notice the differences among those LFs. Therefore, a comparative and quantitative evaluation method that is capable of obtaining more objective and quantitative results is needed. Densitometric image analysis (DIA) is used in other fields as a reliable semi-quantitative comparison method. To apply DIA to LFs, the potential variables that can occur during the DIA process were tested. The visualized ridges of LFs can be compared using the concentration of dots against the background to make it possible to analyze the ridges with DIA. The variables that can be present during the DIA process include the thickness of the analysis line, the number of ridges to be taken, the number of divided zones within each of the fingerprints, and the angles of the analysis line against the ridge lines that were selected. From the analysis of the inked fingerprints and circular lines that are similar to fingerprints, the angle of the analysis lines with the ridge line was the most significant variable. The preliminary test result was applied to the comparison of LFs that were developed with the powder method and then compared with the AFIS analysis. A similar trend was found, and a more detailed and semi-quantitative comparison of the visualized LFs was possible. In the future, it is necessary to check the evaluative ability of the DIA method by analyzing the visualized LFs with other various development methods. However, DIA is currently an option that can be used as an objective comparative evaluation method during fingerprint studies with supplementary role.

• Structural Engineering and Mechanics
• /
• v.53 no.3
• /
• pp.481-495
• /
• 2015

Many hydropower stations in southwest China are located in regions of brittle rock mass with high geo-stresses. Under these conditions deep fractured zones often occur in the sidewalls of the underground caverns of a power station. The theory and methods of fracture and damage mechanics are therefore adopted to study the phenomena. First a flexibility matrix is developed to describe initial geometric imperfections of a jointed rock mass. This model takes into account the area and orientation of the fractured surfaces of multiple joint sets, as well as spacing and density of joints. Using the assumption of the equivalent strain principle, a damage constitutive model is established based on the brittle fracture criterion. In addition the theory of fracture mechanics is applied to analyze the occurrence of secondary cracks during a cavern excavation. The failure criterion, for rock bridge coalescence and the damage evolution equation, has been derived and a new sub-program integrated into the FLAC-3D software. The model has then been applied to the stability analysis of an underground cavern group of a hydropower station in Sichuan province, China. The results of this method are compared with those obtained by using a conventional elasto-plastic model and splitting depth calculated by the splitting failure criterion proposed in a previous study. The results are also compared with the depth of the relaxation and fracture zone in the surrounding rock measured by field monitoring. The distribution of the splitting zone obtained both by the proposed model and by the field monitoring measurements are consistent to the validity of the theory developed herein.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.265-269
• /
• 2006

Anti-Roll Tanks, also called Sloshing Tanks, is a rather common and sometimes an efficient method of limiting the roll angles. The important parameters, when considering using anti-roll tanks, are positioning, size, duct area, flow control device etc. Measurement by the PIV(Particle Image Velocimetry) was conducted to investigate the flow characteristics around control damper and inlet area of duct for three kind of inclined angle $(\alpha=0^*,\;10^*\;and\;20^*)$. Flow behaviors such as instantaneous and time-mean velocity vectors are investigated. Furthermore, to reveal boundaries between flowing and stagnant zones and to extract velocity profiles at any selected sections of the lower duct for passive anti-rolling tanks system.

• Structural Engineering and Mechanics
• /
• v.67 no.6
• /
• pp.579-585
• /
• 2018

Masonry walls are of a complex (anisotropic) structure in terms of their mechanical properties. The mechanical properties of the walls are affected by the properties of the materials used in wall construction, joint thickness and the type of masonry bond. The carried-out studies, particularly in the seismic zones, have revealed that the most of the conventional masonry walls were constructed without considering any engineering approach. Along with that, large-scale damages were detected on such structural elements after major earthquake(s), and such damages were commonly occurred at the brick-joint interfaces. The aim of this study was to investigate the effect of joint thickness and also type of mortar on the mechanical behavior of the masonry walls. For this aim, the brick masonry walls were constructed through examination of both the literature and the conventional masonry walls. In the construction process, a single-type of brick was combined with two different types of mortar: cement mortar and hydraulic lime mortar. Three different joint thicknesses were used for each mortar type; thus, a total of six masonry walls were constructed in the laboratory. The mechanical properties of brick and mortars, and also of the constructed walls were determined. As a conclusion, it can be stated that the failure mechanism of the brick masonry walls differed due to the mechanical properties of the mortars. The use of bed joint thickness not less than 20 mm is recommended in construction of conventional masonry walls in order to maintain the act of brick in conjunction with mortar under load.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.3 s.116
• /
• pp.1-11
• /
• 2006

This study analyzed characteristics of natural and human environments in Chuncheon's Gongji stream, and suggested nature-friendly planning strategies for self-purification of water quality, biodiversity improvement and conservative waterfront recreation. The environmental analysis included streambed structures, floodplain soils, water quality, vegetation, wildlife, and human facilities. Natural colonization of vegetation for the middle section of the study stream was obstructed by a straightened concrete revetment of baseflow channel, and vehicle movement and concrete parking lots across the floodplain. These human disturbances also deteriorated the naturalness of the stream landscape and limited habitation of bird species. However, natural sedimented wetlands in half of the channel width for the lower section of the stream contributed to a desirable vegetational landscape and greater bird occurrence. Based on BOD measurements, water quality of the stream fell under class $II{\sim}III$ of the stream water-quality standard, but it was worse around sewage outlets due to incomplete sewage collection especially during the dry season. Dominant fish species included typical inhabitants of good water-quality streams that are tolerant of adverse habitat changes. Nature-friendly planning strategies were established based on analysis of the environmental characteristics. They focused on not merely spatial zoning and layout divided into four zones - preservation, partial preservation, conservation and use -, but close-to-nature channel revetment techniques, natural water-purification facilities, biotope diversification, and water-friendly recreation and circulation. Strategies pursued both renewal of stream naturalness and hydraulic stability of streamflow by minimizing transformation of natural channel micro-topography and biotope, and by reflecting natural traces of streambed structures such as revetment scour and sedimentation.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.30-34
• /
• 2009

Recently, systems providing the interaction different according to an interval between a user and the display were developed in order to construct the ambient or the ubiquitous computing environment. Therefore, we propose a new type of spatial interaction system; our main goal is to provide the interactive domain in the large-scale ambient display environment. So, we divide into two zones of interaction dependent on the distance from the interaction surface interactive zone and ambient zone. In interactive zone, the users can approach the interaction surface and interact with natural hand-touch. When the users are outside the range of the interactive zone, the display shows only general information. Therefore, this system offers the various interactions and information to users in the ubiquitous ambient environment.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.124-137
• /
• 2018

The OTT service in Korea is not as popular as that in the U. S. This study argues that one of the major reasons of poor performance of OTT in Korea is that the OTT service providers did not acquire attracting contents, thus failing to appeal to Korean users. The other reason is Korean users are not willing to use OTT services because of high telecommunications fees to use OTT services. That is why most OTT users are using OTT services in WiFi zones, such as house, workplace, or school. This study investigated the popular OTT contents in recent three years, and how these popular OTT contents are provided in OTT service platforms, and how these contents are used in different places. The results of this study may provide several implications for OTT service providers' strategies in the future, and propose policy implications for the development of OTT services in Korea.