• 제목/요약/키워드: school uniform

검색결과 1,568건 처리시간 0.039초

육류가공품의 고압처리가 신선도에 미치는 영향 평가 (Effect of High Pressure Processing on Freshness of Meat Products)

  • 황성희
    • 한국식품위생안전성학회지
    • /
    • 제33권4호
    • /
    • pp.272-279
    • /
    • 2018
  • 바다속 60 km 깊이의 수압과 같은 압력을 사용하여 순간적이고 균일한 압력전달로 가열공정을 최소화함으로써 신선한 맛과 향, 텍스처, 비타민의 유지 등 품질보존을 할 수 있는 기술인 HPP는 식중독과 부패미생물을 억제하는 효과를 가져올 수 있는 기술로 현재 가장 활발히 연구되고 있는 분야이다. 기존의 열처리가 단백질의 변성, 화학적 변화, 전분의 호화, 효소의 활성에 영향을 미쳐서 보존성을 유지한다면 HPP는 열처리의 장점은 그대로 갖고 있으면서 열처리에서 야기되는 원치 않는 화학적 변화를 최소화할 수 있다는 장점을 갖고 있다 보존기간이 길어 소비자들이 우려하는 첨가물의 사용이 필수적인 육류가공품에 대해서는 초고압처리에 대한 국내 연구가 미비하여 본 연구에서는 대표적인 육가공품인 슬라이스햄에 대해 600 MPa 초고압처리(0분, 4분, 6분)가 이들의 신선도에 미치는 영향을 실험하였다. 수분함량은 48~69%, 염도 1.07-1.11%에서 변화를 보이고 있었고, pH는 처음 6.4-6.5에서 6.1-6.15까지 낮아졌으나 대조군과 처리군간의 차이는 나타나지 않았다. 초고압처리 후 $20^{\circ}C$에서 보관한 일반세균 결과는 4주까지 모든 군에서 미미한 수준에서 일반미생물이 발견 되었으나 5주부터는 대조군과 HPP 6분 처리군에서 $10^5$을 초과하였고 7주에는 4분 처리군, 6분처리군에서 식품으로 섭취가 불가능한 $10^6$을 초과하는 것으로 나타났다. 대장균군은 $20^{\circ}C$ 가중실험으로 7주간 관찰하였음에도 불구하고 모든 군에서 대장균군이 발견되지 않았다. 육류의 단백질 신선도 판정에 사용되는 방법인 VBN은 4주차까지는 1 mg% 미만의 VBN값을 보였고 5주부터는 1~2 mg%의 값을 나타냈다. 그러나 군별 차이는 나타나지 않았다(p > 0.05). 육의 조직내 지방 산패 정도의 지표로 사용되는 TBA는 7주가 끝날 때까지 0.18 mgMA/kg 이하였고 이 수치는 신선육의 범위에 들며, 처리군별 차이를 보이지 않았다. 본 실험에서는 포장재의 변성이 발생하지 않았고 가스의 발생으로 인한 부풀어 오름도 발생하지 않았는데, HPP의 효과가 전혀 관찰되지 않은 사실은 포장재의 밀착으로 인한 공기와의 차단만으로 기본적인 보존 효과를 보인 것이 아닌가 사료된다.

세기변조방사선치료 선량분포 확인을 위한 2차원적 이온전리함 배열의 특성분석 (Dosimetric Characterization of an Ion Chamber Matrix for Intensity Modulated Radiation Therapy Quality Assurance)

  • 이정우;홍세미;김연래;최경식;정진범;이두현;서태석
    • 한국의학물리학회지:의학물리
    • /
    • 제17권3호
    • /
    • pp.131-135
    • /
    • 2006
  • 본 연구의 목적은 2차원적 이온전리함 배열의 특성을 분석하고 세기변조방사선치료 선량분포 확인의 유용성을 평가하기 위함이다. 본 실험에 사용된 2차원적 이온전리함 배열(MatriXX, Scanditronix-Wellhofer, IBA, Germany)은 $24{\times}24cm^2$ 범위에 1,024개의 평판형 전리함(용적: $0.08cm^3$, 직경: 4.5 mm, 높이: 5 mm, 배열간격: 7.62 mm)이 일정한 간격으로 배열되어있다. MatriXX의 특성분석을 위해 선량 직선성, 선량률 의존도, 출력 계수, 단기 선릉재현성을 분석하였으며, 선량분포 확인의 신뢰도를 평가하기 위해 Varian사의 동적쐐기와 세기변조 방사선치료의 선량분포를 분석하였다. 선량 직선성의 범위는 $1{\sim}800$cGy이었으며, 1% 미만의 오차율을 보였다. 선량률 의존성(범위 $100{\sim}600MU/min$)은 300 Mu/min을 기준으로 했을 때 모든 선량률 범위에서 0.4% 미만의 선량변화를 보였다. 또한, 물팬톰에서 0.1 cc 지두형 전리함으로 측정한 출력계수와 폴리스틸렌 팬톰에서 MatriXX로 측정한 출력계수를 비교하였다. 이 실험의 결과, $3{\times}3{\sim}24{\times}24cm^2$ 범위에서 0.5% 미만의 일치를 나타내었다. 단기 출력재현성 확인을 위하여 15분 간격으로 6회 측정한 결과, 0.5% 내의 차이를 보였다. 동적쐐기와 세기변조 방사선 조사면의 일치성 실험에서도 치료계획장치의 계산값과 필름측정값이 비교적 잘 일치함을 알 수 있었다. 본 연구를 통해 MatriXX의 물리적인 특성을 분석하였으며 세기변조방사선치료의 품질관리를 위한 유용성을 확인하였다.

  • PDF

페르낭 크노프(Fernand Khnopff)의 작품에 나타난 벨기에 상징주의와 내셔널리즘 (Fernand Khnopff's Belgian Symbolism and Nationalism in I Lock My Door upon Myself)

  • 정연심
    • 미술이론과 현장
    • /
    • 제9호
    • /
    • pp.171-193
    • /
    • 2010
  • This paper examines Fernand Khnopff's Symbolism, focusing on the I Lock My Door upon Myself as a manifesto of his artistic credo in style and theme. Its title was originally in English, originating from the poem "Who Shall Deliver Me?" by Dante Gabriel Rossetti's sister Christina Rossetti. I use the term "Social Symbolism" which combines a nationalist perspective with traditional French Symbolism, in order to explain how the image of Bruges is represented in his oeuvre. Symbolism calls for psychological introspection evoking death, love, silence, and solitude and recluse from realty in pursuit of the Unknown and the Ideal. Although Khnopff shared this idea, he departed from symbolist tradition by incorporating a political milieu in his paintings. First, I discuss Khnopff's early stage in the formation of his artistic concept, including his family background as well as his early opportunity to visit the Exposition Universelle in Paris where he formed his early interests in aesthetics, philosophy, literature, mythology and Egyptian art. His early works, La Painture, la Musique, la Poesie(1880-1881), Le Crise(1881), and En ecoutant Schuman(1883) reveal his favorite subjects which were quite prevalent in the symbolist traditions of both Belgium and France. By looking at Khnopff's paintings, I endeavor to situate his Symbolism in the context of the development of Belgian modernity and cultural nationalism. Second, my analysis of Khnopff creates a new overview of Symbolism in Europe, especially in Belgium. In the absence of socio-political integration, the Symbolist painter adds nostalgic meaning to the landscape of Bruges. The scene of Bruges illuminates the social atmosphere in Belgium at that time. Since Belgium became an independent country, it tried to differentiate its own cultural and national identity from France. There was a powerful social movement for Belgium to claim its own identity, language, and culture. Bruges was, for Symbolists, the epitome of Belgium's past glory. This encouraged the formation of Belgian nationalism centering on Brussels, as I demonstrate in Khnopff's Bruges-la-Morte(1892). The relationship between Symbolist artist and writers is crucial for understanding this development. Khnopff, for instance, illustrated or provided frontispieces for many Symbolist writers such as Rodenbach, Peladan, Spencer and Le Roy. Khnopff did not objectify the exact meaning, but rather provided his own subjective interpretation. In this respect, I Lock My Door, inspired by Rossetti, started from the same motif, but Khnopff seeked escape into silence and death while Rossetti searched for Christian salvation. Finally my paper deals with the social context in which Khnopff worked. He was a founding member of Les XX in 1883 and later La Libre Esthethetique he also participated in the exhibition of le Salon de la Rose + Croix. Les XX was not a particular school of art and did not have a uniform manifesto, but its exhibitions focused on decorative arts by encompassing art for all people via common, everyday objects. The Periodical, L'art moderne was founded to support this ideal by Edmond Picard and Maux. Les XX declared art as independent art, detached from all official connections. Khnopff designed the 1890 catalogue cover of Les XX and the 1891 cover. These designs show decorative element of Art Nouveau in an early example of "modern poster." Les XX pursued all art including graphic arts, prints, placard, posters and book illustrations and design. These forms of art were l'art social and this movement was formed by the social atmosphere in Belgium in terms of social reforms and strikes by working class. Khnopff designed the book cover for la Maison du Peuple. The artist, however, did not share the ideal egalitarianism of the working class to a certain degree, while he was working in his villa he designed under the ideal motto, "on n'a pas que," he expressed the nihilistic emotions toward society by the theme of interiority such as solitude, silence, narcissism, introspection, and introversion. In the middle of his Symbolism, we find the "cultural nostalgia" or longing that the artist develops in the I Lock My Door upon Myself. Khnopff's longing toward the lost city of "Bruges" form the crux of his "Social Symbolism."

  • PDF

요막관 기형의 임상적 고찰 (A Clinical Observation of Children with Urachal Anomalies)

  • 이상배;정창현;김강성;류민혁;이동진
    • Childhood Kidney Diseases
    • /
    • 제9권2호
    • /
    • pp.213-221
    • /
    • 2005
  • 목 적 요막관 기형은 증상이 없는 경우 발견하기 힘든 드문 질환으로 유형에 따라 다양한 임상 양상을 보이며 적절한 진단과 치료가 지연되는 경우는 농양이나 복막염, 드물게는 결석 형성과 악성 종양으로 이행될 수 있다. 그러나 균일한 지침의 부족으로 진단과 치료에 어려움이 따르는 경우가 많았다. 이에 저자들은 울산 동강병원에서 치료한 14례의 환자를 분석하여 이 질환의 진단과 치료에 도움이 되고자 본 연구를 시행하였다. 방 법 . 1996년 1월부터 2005년 6월까지 울산 동강병원에서 치료한 20세 미만의 환자 14례를 대상으로 이들의 의무 기록을 검토하여 성별 및 연령별 분포, 기형의 유형, 임상 증상, 진단 방법, 동반 기형, 치료 방법, 합병증 등을 후향적으로 분석하였다. 결 과 : 14명의 환아 중 남아와 여아는 각각 7명씩이었으며 평균연령은 3.8세였다. 요막관 낭종이 6례로 가장 많았으며 요막관 개존이 4례, 요막관 게실과 요막관동이 각각 2례씩 조사되었다. 동반 질환으로는 수신증이 4례로 가장 많았으며 서혜부 탈장 1례와 방광-요관 역류 1례가 관찰되었다. 진단을 위한 일차 검사로 고해상도 초음파 검사가 13례, 전산화 단층촬영이 1례에서 시행되었고 모든 환아에서 일차 검사로 기형의 유형이 확인되었다. 모두 9례에서 외과적 절제술이 시행되었으나 신생아기에 발견된 6례 중 5례는 추적 관찰을 통해 자연 소실을 확인할 수 있었다. 결 론 : 저자들은 기형에 대한 일차 검사로 고해상도 초음파 검사를 통해 용이하게 진단할 수 있었으나 정확한 유용성을 알기 위해서는 추후 다른 진단 방법과의 비교 조사가 이루어져야 할 것으로 생각된다. 또한 치료 전 동반 가능한 비뇨기계 및 위장관계 질환에 대한 정확한 평가가 필요하며 신생아기에 진단된 요막관 기형인 경우는 외과적 절제보다는 면밀한 추적 관찰이 우선되어야 할 것으로 생각된다.

  • PDF

다공성 표면에서 현출된 지문의 정량적인 평가방법 개발을 위한 농도계 이미지 분석을 이용한 선행연구 및 응용 (A preliminary study and its application for the development of the quantitative evaluation method of developed fingerprints on porous surfaces using densitometric image analysis)

  • 조재현;김효원;김민선;최성운
    • 분석과학
    • /
    • 제29권3호
    • /
    • pp.142-153
    • /
    • 2016
  • 범죄수사에서 지문인식은 개인 식별을 위한 가장 중요한 기술 중 하나이다. 그러나 다양한 방법으로 각각 현출된 지문을 비교하는 객관적이고 공정한 평가 방법은 존재하지 않는다. 따라서 객관적이고 정량적인 방법의 개발을 위하여 농도계 이미지 분석(densitometric image analysis) 프로그램(CP Atlas 2.0)과 Automated Fingerprint Identification System (AFIS)을 이용하여 다공성 표면에서 현출된 지문을 비교, 평가하였다. 먼저 시료지문 채취 상 최적의 압력과 유류시간 조건을 찾기 위하여 두 가지 조건을 변화시켜 날인을 한 비교적 균일한 품질을 가진 잉크지문(Inked fingerprint)을 분석하였다. AFIS 분석을 통해 얻은 특징점(minutia)수와 이미지 분석을 통해 얻은 융선 peaks의 면적 결과를 계산하여 비교한 결과 1.0 kg.f 의 압력으로 5초(sec.) 동안 유류 한 잉크지문이 육안 상 가장 선명한 융선을 보였으며 가장 많은 수의 특징점 수, 가장 넓은 융선의 peaks 면적을 갖는 것을 확인 할 수 있었다. 또한, 잠재지문 현출에 응용하기 위하여 감열지에 날인 된 잠재재문을 iodine fuming법으로 현출시켜 분석한 결과 1.0 kg.f/5 sec의 조건에서 특징점 수가 가장 많고 융선의 peaks 면적도 가장 넓게 나오는 것을 확인하였다. 추가적으로 프린트 용지에 날인한 잠재지문을 0.5 %와 5 %의 ninhydrin용액으로 현출하여 비교한 결과 2.0 kg.f/5 sec의 조건으로 날인하여 5 %의 ninhydrin용액으로 현출하였을 때 가장 좋은 결과를 갖는 것을 확인하였다. 전반적으로 이미지분석을 통하여 얻은 peaks의 평균면적이 클수록 AFIS를 통해 확인되는 특징점수가 많아진다는 것이 확인되었으며 농도계 이미지 분석을 이용한 지문 평가의 추가적인 연구를 통해 본 방법은 지문 현출 평가에 대한 객관적이고 정량적인 새로운 시험방법이 될 수 있을 것으로 사료된다.

상악 치열의 치군 후방이동에 관한 3 차원 유한요소법적 연구 (THREE DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE PHENOMENON DURING DISTAL EN MASSE MOVEMENT OF THE MAXILLARY DENTITION)

  • 신수정;장영일
    • 대한치과교정학회지
    • /
    • 제28권4호
    • /
    • pp.563-580
    • /
    • 1998
  • 치열의 치군 후방이동을 유발하는 교정력에 의해 발생되는 개개 치아의 초기 변위와 응력분포를 평가하고자 본 연구를 시행하였다. 유한요소법을 이용하여 상악 치아와 치근막, 그리고 치조골의 해부학적 형태와 생체적 특성을 컴퓨터로 재현하고 모형화된 브라켓을 부착한 3 차원 유한요소 모델을 형성하였다. 치열의 치군 후방이동에 사용되는 구외력과 II급 악간고무, ideal arch wire와 MEAW(Multiloop Edgewise Arch Wire), 그리고 호선에 부여된 tip back bend 에 의해 야기되는 치아 변위를 비교, 분석하였다 그리고 이러한 치료방법을 상악 제 2 대구치를 발거한 경우와 발거하지 않은 경우에 각각 적용하여 상악 제 2대구치 존재유무에 따른 치아이동 양상의 변화를 분석한 결과 다음과 같은 결론을 얻었다. 1. 전치부 헤드기어에 의해 발생되는 치아변위는 후방 치체변위와 후방 경사변위, 그리고 수직변위 모두 치열 전방부에 집중되어 있었다. 2. Ideal arch wire에 II급 악간고무를 적용한 경우, 치아변위가 치열 전방부에 집중되었으나 ideal arch wire에 tip back bend를 부여하면 악간고무에 의한 견인력이 후방으로 전달되었다. 부여하는 tip back bend의 양이 증가할수록 전치부의 후방 치체변위와 설측 경사변위는 감소하였고 구치부의 후방 치체변위와 경사변위는 증가하였으며 II급 악간고무에 의한 전치부 정출이 감소하였다. 3. MEAW와 II급 악간고무를 적용한 결과, 치아변위 경향은 ideal arch wire와 II급 악간고무를 사용한 경우와 유사하였으나 작은 양의 치아변위와 함께 치열내 개개치아의 비교적 균등한 이동양상을 보였다. 4. 상악 제 2 대구치가 존재하는 유한요소 모델에 상악 제 1 대구치까지만 교정장치를 장착하고 후방이동을 시도한 결과 상악 제 1 대구치 치아이동이 감소하는 경향을 보였다.

  • PDF

밀폐된 챔버의 QRD 마이크로파 조사용량과 위치에 따른 분산효과 (Dispersion Effect Based on Irradiation Dose and Position of QRD Microwave in Sealed Chamber)

  • 김진현;한충수;이근우;임경호;이재현;김경민;하유신
    • 생물환경조절학회지
    • /
    • 제23권1호
    • /
    • pp.1-10
    • /
    • 2014
  • 본 연구에서는 파장의 위상차를 변화시켜 균일한 살균을 유도할 수 있고 저전력으로 효과를 높일 수 있는 QRD(quadratic residue diffusor) 마이크로파를 이용하여 챔버 내부의 위치에 따른 온도변화를 측정하여 효율성과 균등성을 분석한 결과는 다음과 같다. 챔버 내부의 수직 35cm, 중앙 위치에서는 7kW 조사시 가장 효율이 높게 나타났고, 좌우측 위치에서는 5kW에서 효율성이 높았다. 그리고 마그네트론 No. 1, 2, 3에서 3kW로 하였을 때, Bar의 위치에 따른 온도 균등성은 1Bar와 2Bar의 위치에서는 거의 비슷하게 나타났다. 마그네트론 No. 3, 4, 5의 3kW로 하였을 경우에는 3Bar에서 온도가 약 10~20% 정도 높게 나타났고 마그네트론 용량을 5, 7, 9kW로 하였을 때, 조사 시간에 대한 평균 온도는 Bar의 위치에 무관하게 거의 유사한 형태로 증가하였다. 반면에 챔버의 적정 내용적에 대한 효율성은 조사용량에 반드시 비례하지는 않았다. 마그네트론 3kW를 60, 120, 180초 동안 조사하였을 경우 마그네트론 조사 위치에 따라 구석 부분에서 약 $5{\sim}10^{\circ}C$ 더 높게 상승하였고 수평면의 위치별 온도 분포는 비교적 균일하였으며 부분적으로 구석부분에서 약간 더 온도가 상승하는 경향이 있었다. 마그네트론 5, 7, 9kW 조사에서는 Bar의 위치와 상관없이 전반적으로 온도가 비교적 균일하게 상승하고 있었다.

경관영향 요소별 경관 대비성 평가 - 자연경관에 도입되는 건축물을 중심으로 - (Evaluating the Visual Contrast Rating of the Landscape Impact Factors - A case study for the Buildings in Natural Landscape -)

  • 최원빈;신지훈
    • 농촌계획
    • /
    • 제24권3호
    • /
    • pp.87-96
    • /
    • 2018
  • While cities became bigger and bigger since 1990s, many indiscretely high buildings started to be built in the mountain areas inside a city and in the rural areas in the suburb of each city. To regulate such indiscrete developments, the government prepared for some relevant legal and institutional criteria by having enacted the "Landscape Act" and established a strong management means in the legal and institutional aspects by having introduced the natural landscape deliberation system and the landscape deliberation one into the "Natural Environment Conservation Act." However, since some uniform levels of absolute height and no. of stories are suggested legally and institutionally, it is hard to consider the effects of a real building structure onto the relevant landscape. Accordingly, this thesis is intended to grasp the contrast of the landscape elements in the allowable height section, which is presented through landscape sensitivity. As the results from the visual contrast rating on a small apartment complex located in Dangjin and a large scale of apartment complex in Seosan as the apartment complexes surrounded with natural landscapes that were selected as the subjects of this study, the following conclusion can be finalized. First, there were deducted some factors, that is, forms, lines, colors, textures and sizes as the ones with which can measure and evaluate the contrasting properties when a structure gets into a natural landscape. Second, in case of a small scale of apartment complex (in the foreground) compared to a large one (in the foreground), it was found that the contrasting properties were bigger. In addition, it was also found that the contrasting property of the landscape factor of the foreground compared to that of the middle one becomes bigger depending on a distance. Third, as the results from an evaluation on the contrasting properties of the landscape factor depending on the changes of each floor of a structure, it was found that the factors, that is, forms, lines, colors, textures and sizes are very significant. Among those factors, the factors, forms and lines in a small scale of apartment complex (in the foreground) showed each log regression. But in all of the other cases, they showed each line regression. Fourth, as the results from examining the regression coefficients of the landscape factor, the coefficients of the shapes and lines have similar coefficients and the colors and the textures have similar ones, too. In case of the sizes of apartment complexes, the colors and the textures of a large apartment complex (in the foreground) have similar coefficients, in case of that in the middle ground, the shapes and lines have similar coefficients. Fifth, as the results from estimating the contrasting properties of the landscape factor on the floors within the allowed scope of the landscape sensitivity, it was found that the contrasting property was 3.5 to 4.9 in case of a small scale of apartment complex (in the foreground), but 2.5to 3.7 in case of a small scale of one. In case of a large scale of apartment complex, the value was 3.5 to 5.3, but in case of a large one in the middle ground was 2.9 to 4.9. Sixth, it was comprehended that the contrasting properties of the landscape factor become different depending on each size of apartment complex and the distance of a view point. In this study, it is intended to find the meaning from the aspect that the results can be used as the baseline data for comprehending a proper range of heights of structures objectively during a natural landscape deliberation or a landscape deliberation.

설비공학 분야의 최근 연구 동향: 2014년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2014)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제27권7호
    • /
    • pp.380-394
    • /
    • 2015
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

중국인과 일본인에 대한 가변형 치과 인상용 트레이의 적합성에 관한 연구 (A Study on the Fitness of Adjustable Dental Impression Trays on the Chinese and Japanese)

  • 강한중;이진한;최종인;이인섭;동진근
    • 대한치과보철학회지
    • /
    • 제46권2호
    • /
    • pp.175-184
    • /
    • 2008
  • 연구목적: 본 연구는 가변형 트레이 개발의 일환으로 그 시제품을 제작하고 비가역성 수성 콜로이드 인상재를 사용하여 중국인과 일본인에서 인상채득 시 트레이의 구강 내 적합성를 알아보고자 하였다. 연구재료 및 방법: 가변형 트레이는 한국 성인 악궁의 크기 분석결과를 기본으로 하여 설계하였으며, 먼저 CAD-CAM 작업을 통하여 견본 모형을 제작한 후, 이를 똑같이 복제한 실리콘 간이금형을 만들었다. 그리고 이 금형에 polyurethane을 주입하여 다수의 시제품을 완성하였다. 시제품을 이용하여 중국인으로는 상해 제2의과대학교 구강의학원 학생 60명 (남자 30명, 여자 30명)을 대상으로 하였고, 일본인으로는 일본 구마모토 고등학교 졸업생 60명 (남자 30명, 여자 30명)을 대상으로 인상채득을 실시하고, 측정부위별로 인상체의 두께와 길이를 측정한 후 통계처리를 하여 그 적합성을 평가하였다. 결과: 1. 중국인과 일본인 모두 스탑과 경사면에 의해 트레이의 폭이 적절히 조절되어 대체적으로 3-6mm의 균일한 인상체의 두께를 얻을 수 있었다. 2. 중국인의 상악 트레이에서는 전치 순측 변연부에서 두께가 6.2mm, 견치 순측 변연부에서 두께가 5.9mm, 구개부 중앙은 10.5 mm, 구개부 후방은 9.7mm 높이로 비교적 인상체의 두께가 크게 측정되었다. 3. 중국인의 하악 트레이에서는 제1, 2소구치 접촉점 설측 변연부에서 인상체의 길이가 8.9mm, 전치 설측 변연부에서 7.2mm로 길게 나타났으며, 견치 순측 6.8mm, 소구치 순측 7.0mm로 인상체의 두께가 크게 측정되었다. 4. 일본인의 상악 트레이에서는 전치 순측 변연부에서 두께가 7.4mm, 견치 순측 변연부에서 7.7mm, 구개부 중앙은 9.1mm 높이로 인상체의 두께가 비교적 크게 측정되었다. 5. 일본인의 하악 트레이에서는 견치 순측 7.4mm, 제1, 2소구치 접촉점 순측 변연부 8.4mm로 인상체의 두께가 크게 측정되었다. 결론: 본 가변형 치과 인상용 트레이는 한국인 모형 계측치를 바탕으로 설계되어 한국인에서 적합성이 우수하며, 본 실험의 결과 중국인과 일본인에서도 적합성이 좋아 본 트레이를 범용하여 쉽고 정확한 인상채득을 할 수 있을 것이다.