• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권2호
• /
• pp.315-323
• /
• 2015

The weld scallop has been used for joining T-bars. There are a lot of weld scallops in shipbuilding. It is difficult to perform scallop welding due to the inconvenient welding position. This results in many problems such as porosity, slag inclusion, etc. In this study, a new method is devised to remove weld scallops by incorporating a Ceramic Backing Material (CBM). The weld scallop is removed by an elongation of the v groove. In order to insert a CBM into the groove without a weld scallop, a wedge-shaped CBM is developed. The top side of the developed CBM is similar to the shape of a general back bead. The bottom surface has a saw-toothed shape for cutting at a suitable length. This can be attached to the root side of a face plate using adhesive tape, just like a general CBM. Welding experiments in normal and abnormal conditions are carried out and the possibility of burn-through is examined. This CBM's applicability to shipbuilding is verified.

• 수산해양기술연구
• /
• 제36권3호
• /
• pp.210-221
• /
• 2000

완도연안의 비단가리비 개체군을 대상으로 자원생태학적 특성을 규명하기 위해 1998년 11월부터 1999년 10월까지 서식환경 및 밀도조사를 하였고, 패각에 나타난 윤문을 이용하여 연령과 성장을 구명하고, 생식소 난성숙비, 숙도지수의 변화, 포란수 측정 등으로부터 성숙과 산란에 대하여 조사하였다. 1. 수온 및 비중의 범위는 7.6∼25.9$^{\circ}C$, 1.0188∼l.0260였고 DO와 pH는 각각 6.48∼9.50ppm, 8.17∼8.80의 범위였다. 2. 저질상태에 따른 서식밀도는 암반과 자갈에서 28.83 마리/100㎡의 가장 높은 서식밀도를 보였고, 전체의 82,4%가 서식하였다. 3. 각장 (SL)과 각고 (SH)와의 관계는 SH=1.021SL+2.211 (R$^2$= 0.989), 각장과 전중량(TW)의 관계는 TW=$0.0003SL^{2.837}$ (R$^2$= 0.980)였다. 4. von Bertalanffy 성장식의 매개변수 추정치를 보면 이론적 최대각고($SH_{\infty}$)는 117.4mm, 성장계수 (K)는 0.612/yr, 각고가 0일 때의 이론적인 연령 ($t_{0}$)는 -0.017세였다. 5. 50% 군성숙연령은 0.21세로 이 때의 군성숙 각고는 18.3mm였다. 산란기는 6∼7월과 10월 연 2회 추정되었으며, 포란수 (Fc)에 대한 각장 (SL) 및 생식소중량 (GW)의 관계는 Fc = $697.03SL^{2.683}$ (R$^2$= 0.984), Fc =10,076,090GW + 15,608,781 (R$^2$= 0.990)로 나타났다.

• 한국수산과학회지
• /
• 제14권4호
• /
• pp.221-226
• /
• 1981

영일만에서 1980년 4월과, 1981년 4월 및 5월에 채묘하여 1981년 7월까지 양성한 결과와 1979년 11월에 자연산을 수집하여 1981율 7월까지 양성한 것을 요약하면 다음과 같다. 1. 양식 가리비는 채묘후 약 1년 3개월 후에 각장이 약 6cm, 2년 후에 9.3cm, 2년 7개월 후에 10cm, 약 3년 2개월 후에 11.2cm, 약 3년 7개월 후에 11.3cm로 성장하였다. 2. 4월에 채묘한 것이 5월에 채묘한 것에 비해 각장의 크기가 7월 중순까지 약 2배 정도 더 컸다. 3. 9월 초에 중간 육성망에 옮겨 양성한 치패가 채묘망에서 관리를 하지 않고 양성한 것에 비해 성장이 훨씬 양호하였다. 4. 치패부터 수하식으로 양성하는 것이 바닥에서 양성한 것이나, 자연산을 수집하여 수하양성한 가리비에 비에 약 1년 이상 성장이 빨랐다. 5. 가리비 성패의 패각근 중양은 각장이 커짐에 따라 증가하는 경향이었는데 15g(각장 $60\sim70mm$)에서 94.13g(각장 $130\sim140mm$)의 값을 보였다.

• 한국수산과학회지
• /
• 제50권5호
• /
• pp.487-493
• /
• 2017

Recent years have seen steadily increasing concerns about human exposure to heavy metals through seafood consumption. In Korea, the diverse dietary patterns of different bivalve shellfish necessitate tissue-specific evaluation of heavy metal contents for risk assessment. We analyzed the heavy metal contents of various tissues in scallops (Patinopecten yessoensis) and pen shells (Atrina pectinate). In both species, we found higher levels of cadmium (Cd) in the mantle than in the adductive muscle, while there was no significant difference between the two tissue types in total mercury (THg) and lead (Pb) (P<0.05). Levels of THg and Pb were acceptable by Korean standards. However, the level of Cd in pen shell mantle tissue exceeded the standard by 40%. The rate of heavy metal exposure from consumption of these species was shown to be 0.003-0.010% of the provisional tolerable weekly intake of THg and 0.312-0.600% of the provisional tolerable monthly intake (PTWI) of Cd as recommended by the Joint FAO/WHO Expert Committee on Food Additives. These findings on the tissue-specific heavy metal contents of these species will be useful in assessing the health risks of Korean dietary habits.

• 한국패류학회지
• /
• 제23권2호
• /
• pp.173-180
• /
• 2007

Health state of the Japanese scallop, Mizuhopecten yessoensis, cultured in the Experimental Marine Farm in Minonosok Bay (Peter the Great Bay, Sea of Japan) was investigated. The wide spectrum of histopathological changes has been identified in the internal organs and tissues of scallops: prokaryotic infection with prevalence 100%, destruction of digestive epithelium and other changes in digestive system, infiltration of organs by hemocytes and granulocytome formation. The most affected by prokaryotic infection organs are labial palps, lips, esophagus, intestine and gills. Several of the observed alterations seem to be related to prokaryotic infection.

• Journal of Chest Surgery
• /
• 제23권6호
• /
• pp.1128-1138
• /
• 1990

The mitral valve is not a simple but a complex structure, mitral valve complex. This complex is composed of mitral orifice, annulus, valve leaflet, chordae tendineae and papillary muscles. There were many controversies about this structures. We studied mitral valve complex in 63 cases of normal Korean adults, such as the circumference of mitral annulus, the intercommissural diameter, height and breadth of the cusps, including commissure, the ratio of rough to clear zone, breadth of the achordal zone, the number of scallops of posterior cusp, the number, length and the pattern of arrangement of the several types of chordae, the number and morphological characteristics of papillary muscles.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.778-783
• /
• 2009

In this research, we propose a method to extract scallop areas in seabed images in order to construct a system that can measure automatically the number, size, and state of fishery resources, especially scallops, by analyzing seabed images. Our algorithm is based on information about the hue, characteristic pattern, and the shape of scallop shells. The effectiveness of the proposed method is illustrated through an experiment.

• 한국패류학회지
• /
• 제13권1호
• /
• pp.1-7
• /
• 1997

한국산 가리비, 큰가리비(Patinopecten yessoensis)와 주문진가리비(Chlamys swifti), 2종에 대한 28S ribosomal RNA 유전자의 PCR- 산물을 이용 RFLP 및 염기서열을 밝히고, 이미 보고된 2과 3종의 염기서열과 상동성을 비교 분석하였다. 그 결과 28S rRNA유전자를 이용하여 7가지 제한효소를 처리한 PCR-RFLP의 종간 차이에서 Taq I 제한효소에서만 차이를 볼 수 있었다. 한편 두종간에 28S rRNA유전자의 D1 부위의 염기서열에서 231개 부위 중 14군데에서 변이를 보였다.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.177-183
• /
• 1994

The ball-end milling process is widely used in the die/mold industries, and it is very suitable for the machining of free-from surfaces. However, cusps(or scallops) remaining at the machined part along the cutter paths require anothe finish process such as polishing or grinding. In this study, a high sped micro ball-end milling method has been suggested for the finish of free- form surfaces. A new tool path which makes the geometrical roughness of workpiece be constant through the machined surface has been developed. In the high speed machining of micro ball-end muling experimets, the developed tool paths have been successfully applied. And it was concluded that the surface roughness from this finish cuts of micro ball-end milling process was acceptable.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2012-2022
• /
• 1993

For the machining of the sculptured surfaces on 5-axis CNC milling machine, the milling cutter direction vector was determined in the study (I) with 5-axis post-processing. Thus, it was possible to cut the sculptured surfaces on five-axis CNC milling machine with the end mill cutter. Then, for smooth machined surfaces in five-axis machining of free-from surfaces, this study develops an algorithm for prediction of cusp heights. Also, it generates tool path such that the cusp heights are constrained to a constant value or under a certain value. For prediction of the cusp height between two basis points, a common plane, containing the line crossing two basis points and the summation vector of two normal vectors at two basis points, is defined. The cusp height is the maximum value of scallops on the common plane after end mill cutter passes through the common plane. Sculptured surfaces were machined with CINCINNATI MILACRON 5-axis machining center, model 20V-80, using end mill cutter. Cusp heights were verified by 3-dimensional measuring machine with laser scanner, WEGU Messtechnik GmbH.