• 대한지하수환경학회지
• /
• 제5권4호
• /
• pp.215-222
• /
• 1998

지하수 세균 군집에 미치는 환경요인의 영향을 분석하기 위하여, 서울 시내에서 음용수로 사용하는 2개 정점과 음용수외 생활용수로 사용하고 있는 8개 정점을 대상으로 조사하였다. 물리.화학적 환경요인과 중금속의 농도, 및 세균 군집의 분포 등 40개 변수를 분석한 결과, 음용수로 사용하는 정점을 제외한 나머지 정점에서 질산성 질소와 암모니아가 용수목적별 수질기준의 기준치 이상으로 측정되었다. 총세균은 5.1~41.4$\times$$10^{5}$cells/ml 범주로, 종속영양세균과 기능성 세균군집은 0.01~29.6$\times$$10^4$cfu/ml의 범주로 조사되었다. 세포외 효소의 활성도는 0.005~11.3$\mu$M/l/hr 의 범주로 나타났고, lipase, phophatase, $\beta$-glucosidase, cellulase, chitinase, amylase 순으로 활성도가 나타났다. 정점별로 조사된 세균 군집에 미치는 환경요인의 상호관계는 대응분석(correspondence analysis)과 다차원 척도법 분석(multidimensional scaling; MDS)으로 하였으며, 그 결과 4개의 집단으로 구분되었으며, 세균 군집에 미치는 주요한 환경요인은 정점별 잠재오염원과 일치하는 양상을 보였다.다.

• Journal of Periodontal and Implant Science
• /
• 제44권6호
• /
• pp.280-287
• /
• 2014

Purpose: The purpose of this randomized single-blind controlled trial was to elucidate the clinical and antimicrobial effects of daily phototherapy (PT) as an adjunct to scaling and root planing (SRP) in patients with chronic periodontitis. Methods: The study was conducted from December 2013 to May 2014 at Ewha Womans University Mokdong Hospital, Seoul, Korea. Forty-one patients with mild to moderate chronic periodontitis were randomly divided into two therapeutic groups in a 1:1 ratio: SRP+PT and SRP (control) groups. All participants underwent full-mouth SRP. PT was performed thrice a day for a month by using electric toothbrushes with embedded light-emitting diodes. Plaque index, gingival index, probing pocket depth (PPD), clinical attachment level (CAL), and bleeding on probing were assessed before (baseline) and four weeks after (follow-up) the treatment. Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola, Prevotella intermedia, Fusobacterium nucleatum, Parvimonas micra, Campylobacter rectus, Eikenella corrodens, Streptococcus mutans, and Streptococcus sobrinus levels were detected by a real-time polymerase chain reaction at the same points in time. Results: The clinical parameters improved in both the groups. At the follow-up assessment, PPD was significantly decreased in the SRP+PT group (P=0.00). Further, PPD and CAL showed significantly greater changes in the SRP+PT group than in the SRP group (PPD, P=0.03; CAL, P=0.04). P. gingivalis and T. forsythia levels decreased in this group, but no significant intergroup differences were noted. Conclusions: Adjunctive PT seems to have clinical benefits, but evidence of its antimicrobial effects is not sufficient. Long-term studies are necessary to develop the most effective PT protocol and compare the effectiveness of PT with and without exogenous photosensitizers.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.683-685
• /
• 2012

본 연구에서는 두개의 게이트단자를 가진 차세대 나노소자인 DGMOSFET에 대하여 문턱전압이하영역에서 발생하는 단채널효과 중 문턱전압 및 드레인유도장벽감소의 변화를 스켈링이론에 따라 분석하고자 한다. 포아송방정식의 분석학적 해를 구하기 위하여 전하분포함수에 대하여 가우시안 함수를 사용함으로써 보다 실험값에 가깝게 해석하였으며 이때 가우시안 함수의 변수인 이온주입범위 및 분포편차 그리고 소자 파라미터인 채널의 두께, 도핑농도 등에 대하여 문턱전압 특성의 변화를 관찰하였다. 본 연구의 모델에 대한 타당성은 이미 기존에 발표된 논문에서 입증하였으며 본 연구에서는 이 모델을 이용하여 문턱전압이하 특성을 분석할 것이다. 분석결과 스켈링이론 적용시 문턱전압 및 드레인유도장벽감소 현상이 변화하였으며 변화정도는 소자 파라미터에 따라 변화한다는 것을 관찰하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.283-290
• /
• 2007

Recently, plastic products in air-intake parts of automotive engines have become very popular due to advantages that include reduced weight, constricted cost, and lower intake air temperature. However, flow-induced noise in air-intake parts becomes a more serious problem for plastic intake-manifolds than for conventional aluminum-made manifolds. This is due to the fact that plastic manifolds transmit more noise owing to their lower material density. Internal aerodynamic noise from an Idle Speed control Actuator (ISA) is qualitatively analyzed by using a scaling law, which is expressed with some flow parameters such as pressure drop, maximum flow velocity, and turbulence kinetic energy. First, basic flow characteristics through ISA passage are identified with the flow predictions obtained by applying Computational Fluid Dynamics techniques. Then, the effects on ISA passage noise of each design factors including the duct turning shape and vane geometries are assessed. Based on these results, the preliminary low noise design for the ISA passage are proposed. The current method for the prediction of internal aerodynamic noise consists of the steady CFD and the scaling laws for the noise prediction. This combination is most cost-effective, compared with other methods, and therefore is believed to be suited for the preliminary design tool in the industrial field.

• 한국소음진동공학회논문집
• /
• 제17권8호
• /
• pp.683-692
• /
• 2007

Recently, plastic products in air-intake parts of automotive engines have become very popular due to advantages that include reduced weight, constricted cost, and lower intake air temperature. However, flow-induced noise in air-intake parts becomes a more serious problem for plastic intake-manifolds than for conventional aluminum-made manifolds. This is due to the fact that plastic manifolds transmit more noise owing to their lower material density. Internal aerodynamic noise from an idle speed control actuator(ISA) is qualitatively analyzed by using a scaling law, which is expressed with some flow parameters such as pressure drop, maximum flow velocity, and turbulence kinetic energy. First, basic flow characteristics through ISA passage are identified with the flow predictions obtained by applying computational fluid dynamics techniques. Then, the effects on ISA passage noise of each design factors including the duct turning shape and vane geometries are assessed. Based on these results, the preliminary low noise design for the ISA passage are proposed. The current method for the prediction of internal aerodynamic noise consists of the steady CFD and the scaling laws for the noise prediction. This combination is most cost-effective, compared with other methods, and therefore is believed to be suited for the preliminary design tool in the industrial field.

• 한국전산유체공학회지
• /
• 제22권1호
• /
• pp.43-50
• /
• 2017

Thermal flowfield of a micro turbojet engine was computationally investigated for exhaust nozzles with different aspect ratio and curvature. Special attention was paid to maximum and average temperature of the nozzle surface and the exhaust nozzle plume. The IR signatures of the micro turbojet engine nozzle were then calculated through the narrow-band model based on thermal flowfield data obtained through CFD analysis. Finally, in order to check the similarity of thermal flowfields and IR signature of the sub-scale micro turbojet engine model and the full-scale UCAV propulsion system, several non-dimensional parameters associated with temperature and optical property of plume were introduced. It was shown that, in spite of some differences in actual values of non-dimensional parameters, the scaling characteristics on spectral feature of IR signature and effects of aspect ratio and curvature of nozzle configuration remain similar in sub-scale and full-scale cases.

• Journal of Periodontal and Implant Science
• /
• 제29권4호
• /
• pp.861-872
• /
• 1999

Since pathologic changes of exposed root surface inhibit cell attachment and new attachment of connective tissue have been made, many efforts were apply to change the exposed root surface condition. Scaling and root planing can not remove the endotoxin completely and forms the smear layer which prohibits the new attachment of connective tissue. Therefore, many kinds of chemicals were used for controlling the pathologic change of the root surface. The purposes of this study was to compare and observe the changes of the exposed root surface treated by scaling and root planning, Tetracycline HCl and Argon Laser. After the scaling and root planning of ten extracted premolars, the differences & the root surface among groups were observed under SEM. Control group showed smear layer and irregular amorphous surface. The dentinal tubule was not exposed. The debris and scale like texture were also observed. Tetracycline HCl treated group showed relatively smooth surface and the collagen fiber was observed in the dentinal tubule. Argon Laser treated group showed the most effective results under the conditions of 0.8 to 1.0w irradiation for 0.5 to 1.0 sec with pulse wave. The results of this study showed that the root surface change was associated with the intensity and the duration of Argon Laser irradiation. Further investigation for the surface change with the Argon Laser irradiation is recommended for understanding of clinical effect.

• Corrosion Science and Technology
• /
• 제16권6호
• /
• pp.285-293
• /
• 2017

The effects of sulfate reducing bacteria (SRB) on the corrosion and scaling of the Q235 carbon steel has been investigated in the simulated sewage water and oil field gathering pipelines production water, using scanning electron microscopy (SEM), energy dispersive x-ray spectrometry (EDS), and three-dimensional stereoscopic microscope. Results indicated that the concentration of SRB reached the maximum value on the ninth day in simulated sewage water with a large amount of scaling on the surface of specimen. In oil field gathering pipelines, a large amount of scaling and mineralization of mineral salts and thick deposition of extracellular polymeric substance (EPS) layers were also observed on the surface of specimen. The thickness of biofilm was about $245{\mu}m$ within 30 days. After adding microbicides, the thickness of corrosion products film was only up to $48-106{\mu}m$ within 30 days, suggesting that SRB could induce biomineralization. Under-deposit corrosion morphology was uniform in the absence of microbicides while local corrosion was observed in the presence of microbicides.

• 한국해양공학회지
• /
• 제35권1호
• /
• pp.75-81
• /
• 2021

Artificial Coral Reefs (ACRs) have been introduced to help solve coastal erosion problems, but their feasibility has not been assessed with field data. This study conducted a feasibility analysis of ACRs on their erosion mitigation effects by performing a case study of Cheonjin-Bongpo beach, South Korea. A numerical-physical combined analysis was carried out using a SWAN model simulation and physical model test with a scale of 1/25 based on field observations of Cheonjin-Bongpo beach. Both Dean's parameter and the surf-scaling parameter were applied to comparative analysis between the absence and presence conditions of the ACR. The results for this combined method indicate that ACR attenuates the wave height significantly (59~71%). Furthermore, ACR helps decrease the mass flux (~50%), undertow (~80%), and maximum wave set up (~61%). The decreases in Dean's parameter (~66%) and the surf-scaling parameter suggest that the wave properties changed from the dissipative type to the reflective type even under high wave conditions. Consequently, an ACR can enhance shoreline stability.

• 치위생과학회지
• /
• 제23권3호
• /
• pp.225-235
• /
• 2023

Background: This study aimed to analyze the effects of periodontal treatment and individual- and tooth-related factors on tooth extraction in people with disabilities. Methods: The Korea National Health Insurance claims data of individuals with disabilities aged 40~64 years with chronic periodontitis in 2008 were obtained. Of these, data on the disabled who underwent scaling/root plaining, subgingival curettage/periodontal surgery, or non-periodontal treatments, and data on their teeth were selected. The extraction of 716,688 teeth from 39,097 patients was tracked until 2018, and the patient- and tooth-level factors related to tooth loss were identified using a mixed-effect logistic regression analysis. Results: Data from approximately 17% of the teeth were extracted during a follow-up period of approximately 11 years. Among the tooth-level variables, scaling/root planing treatment at baseline and periodontal treatment during the follow-up period were associated with a lower risk of tooth loss (odds ratio=0.692 and 0.769, respectively, p<0.001). Non-vital teeth increased the risk of tooth loss by 3.159 times (p<0.001). Among the patient-level variables, females were less likely to have lost their teeth than males, and those with orthopedic impairment or brain lesions/mental disabilities, a higher age group, lower income level, or residents in medium/small cities or rural areas were more likely to have lost their teeth (p<0.001). Conclusion: Through approximately 11 years of follow-up, scaling or root planing, experience with periodontal treatment at least once, female sex, older age, lower income, smaller residential areas, type of disability, and pulp vitality were found to be associated with tooth loss in individuals with disabilities aged 40~64 years with chronic periodontitis. To prevent tooth loss in individuals with disabilities, it is necessary to establish a dental treatment plan that considers the timing of periodontal treatment and the characteristics of the patient and teeth.