• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.43-58
• /
• 2018

In this study, the load-transfer behavior along the shaft of the prebored and precast piles was investigated by pile loading tests. Special attention was given to quantifying the skin frictions developed between the pile-soil interfaces of the 14 instrumented test piles. Based on this detailed field tests, the load - settlement curves and axial load distributions of piles were obtained and the load-transfer curves (t-z curves) for the test piles were proposed. As such, it is found that the test results show two different load transfer behaviors; ductile and brittle behavior curves. The corresponding t-z curves are proposed based on the hyperbolic- and sawtooth-shape, respectively. By validating the accuracy of the proposed curves, it is also found that the prediction results based on the proposed load-transfer curve are in good agreement with the general trends observed by the field loading tests.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.220-231
• /
• 2021

The use of digital copies of film-based analog images and the introduction of digital radiographic imaging systems using image plates gradually replace the non-destructive radiationirradiation method of Cultural Heritage. The quality of images obtained from this technique is affected by conditions such as tube voltage, tube current, and exposure time, type of image acquisition medium, distance of the artifacts from the image acquisition medium, and thickness of artifacts. In this study, we evaluated the grayscale image obtained using GE's Computed Radiograhpy (CR) imaging system, the transmission characteristics of the X-ray source for each tree type (pine, chestnut, sawtooth oak, ginkgo) used in wooden Cultural Heritage, and the signal-to-noise ratio (SNR) and contrast. The GE's CR imaging were analyzed using the Duplex wire image quality indicator, line-pair gauges.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.32-42
• /
• 1995

Cultivation using rain shelter is very popular in summer because rain shelter has a simple structure using less materials than any other regular greenhouse. Although it has a main advantage of easy construction in terms of labour, time and cost, it has some disadvantage of poor ventilation and rain fall inflow. Therefore, the rain shelters being able to overcome the problems, to some extent, are necessary to propagate for practical purpose. Three characteristic types of rain shelter were analyzed using measured and simulated environment data. Type 1 was a conventional type with an arched roof, and Type 2 and Type 3 were improved ones which were designed to have three arched roofs and three sawtooth like roofs with the openings for ventilation, respectively. The distribution of inside temperature measured was relatively uniform in Type 2 and 3 by the natural ventilation through the openings of the roof compared to Type 1 which had no openings. The relative light transmittance measured in Type 2 and 3 showed lower than that in Type 1, which suppressed the rise of inside temperature, For more accurate comparison, the differences between inside and outside temperatures to various wind speeds were calculated by the model. The difference in Type 1 was the greatest at lower wind speed below 1 ㎧, that is, the highest in inside temperature, but decreased rapidly as wind speed increased above 1 ㎧. Measured temperatures generally showed the same trends as calculated ones by the model. As a whole, the improved rain shelters(Type 2 and 3) showed better performance than the conventional one in ventilation as well as inside temperature.

• Journal of Environmental Impact Assessment
• /
• v.20 no.2
• /
• pp.187-198
• /
• 2011

The objective of this study is to analyze the flora and forest vegetation of trails with high visitor density at Molundae. Nine quadrats of $20{\times}20m$ were selected for the survey. The survey was conducted from April to October 2010. The obtained results are summarized as follows. Plot1, plot2, plot3, plot4, plot6, and plot7 were located at slopes of $5{\sim}20^{\circ}$, 17~40m above sea level, and were formed with the colony of Japanese black pine(Pinus thunbergii Parl) and Japanese black pine(Pinus thunbergii Parl)-white oak(Quercus aliena Blume). Tree layer had the height of 8~20m, and the coverage of 50~70%, while subtree layer had the height of 3-8m, and the coverage 30~80%. On the other hand, shrub layer had the height of 2~4m, and the coverage of 10~30%, and herb had the height of 0.2~1m and coverage 5~20%. Plot5, plot8, and plot9 were located at the summit areas of 57~78m above sea level, and $0^{\circ}$ slope. Japanese black pine(Pinus thunbergii Parl) formed a community there. Tree layer was 8~20m high, and covered 60~70%, of the area, and subtree layer was 6~8m high, and coverage 30~40%. Shrub layer had the height of 2~6m, and the coverage of 30%, while herb layer had the height 0.2~2m, and the coverage 20-80%. Succession does not occur in the surveyed areas which have high visitor density. Artificially planted sawtooth oak(Quercus acutissima) trees were found to disturb succession and formation of multi-layer vegetation, resulting in the ecologically unstable forest. Therefore, the researcher suggested the strategy of managing the vegetation in the conclusion. This study has the limit in that the plots selected for the survey reflected only part of various trails in the Molundae area. It is necessary to suggest the vegetation management plans by selecting more diverse trail areas in consideration of the visitor density and behaviors, and analyzing the changes in vegetation quantitatively in order to manage the vegetation in urban areas damaged by visitors more effectively.

• Korean Journal of Environment and Ecology
• /
• v.29 no.4
• /
• pp.599-604
• /
• 2015

This study was conducted the vegetation clustering analysis for the 3 mountains of Mt. Bulam, Mt. Daemo, Mt. Bonghwa which were the urban forests of Seoul. Based on the results of the analysis related to the vegetation clustering, it was found that the clustering of Mt. Bulam consisted of pine trees(Pinus densiflora)-Mongolian oak(Quercus mongolica), Hornb eam(Carpinus laxiflora)-Pitch pine(P. rigida), oriental oak(Q. variabilis) - a wild pear tree(Sorbus alnifolia) while the clustering of Mt. Daemo consisted of Pitch pine-Japanese larch(Larix leptolepis), Poplar(Populus tomentig landulosa)- black birch(Betula davurica pall). Meanwhile, the clustering of Mt. Bonghwa consisted of pine trees-a wild pear tree Community and Sawtooth oak(Q. acutissima)-Cherry Blossoms(Prunus serrulata). In relation to the similarity index by region in Mt. Bulam, Mt. Daemo, and Mt. Bonghwa, the similarity index of Mt. Bulam and Mt. Daemo stood at as high as 0.634, suggesting the distribution of similar vegetation, and the dominance index of the Mt. Daemo region was found to be 0.166 which suggests the dominance of many species compared to other regions. In addition, the results of species diversity showed that Mt. Daemo had the highest stability, and the species diversity, maximum species diversity, evenness indices were highest in Mt. Bulam, followed by Mt. Bonghwa and Mt. Daemo. The dominance index was the lowest in Mt. Bulam, followed by Mt. Bonghwa and Mt. Daemo.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.468-476
• /
• 2020

we developed a stand density management diagram for Quercus variabilis in order to predict the final cutting ages of coppice forests based on management objectives. The sample data were classified into two groups: 603 data points for analysis and 113 data points for verification. Using these data, a stand density management diagram was constructed and a goodness-of-fit test was performed. The explanatory power (R2) of the constituent models for the stand density management diagram was 0.732 for the equivalent height curve and 0.990 for the equivalent diameter curve. According to the analysis of the final cutting age rangeof the highest production, the final cutting ages for 900 buds remaining per hectare was 42-44 years, and that for the 1,800 buds remaining per hectare was 38-42 years. With the third-grade log set as the production target, the final cutting age range with site index 16 and 14 was 25-28 years and 29-33 years, respectively. The results of this study provide baseline data for establishing a management plan for Q. variabilis coppice stands.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.284-293
• /
• 2020

We present a quantitative survey of the carbon storage and absorption capacity of tree species in the vegetation conservation and ecological restoration areas of Bulamsan urban nature park in Nowon-gu, Seoul. The density of the sawtooth oak (Quercus acutissima) community in the ecological conservation area is approximately 30 individuals/225 ㎡, while a further 20 species, such as Japanese snowbell (Styrax obassia), galcham oak (Quercus aliena), Asian Sweetleaf (Symplocos chinensis f. pilosa), East Asian ash (Fraxinus rhynchophylla), and Korean rhododendron (Rhododendron mucronulatum) are sparsely distributed. In contrast, the ecological restoration sites typically comprised Mongolian oak (Quercus mongolica), jolcham oak (Quercus serrata), and East Asian ash (Fraxinus rhynchophylla) plantations, with planting densities of 8.3, 7.7, and 14.3 individuals/25 ㎡ , respectively. Approximately 10 species, including Amur maple (Acer tataricum subsp. ginnala), Korean mountain ash (Sorbus alnifolia), Japanese spice bush (Lindera obtusiloba), and Korean rhododendron (Rhododendron mucronulatum) were identified in the ecologically restored area. The total amounts of carbon stored by the trees in the vegetation conservation and ecological restoration sites are 250.77 and 19.3 t C ha-1, respectively, and the total annual carbon uptakes are 10.28 and 2.33 t C ha-1 yr-1, respectively. The survey results are expected to provide important basic data for monitoring the carbon absorption capacity and carbon balance of green areas in the city.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1053-1064
• /
• 2022

The Thiessen method, which is the current area average precipitation method, has serious structural limitations in accurately calculating the average precipitation in the watershed. In addition to the observation accuracy of the precipitation meter, errors may occur in the area average precipitation calculation depending on the arrangement of the precipitation meter and the direction of the heavy rain. When the watershed is small and the station density is sparse, in both simulation and observation history, the Thiessen method showed a peculiar tendency that the average precipitation in the watershed continues to increase and decrease rapidly for 10 minutes before and after the peak. And the average precipitation in the Thiessen basin was different from the rainfall radar at the peak time. In the case where the watershed is small but the station density is relatively high, overall, the Thiessen method did not show a trend of sawtooth-shaped over-peak, and the time-dependent fluctuations were similar. However, there was a continuous time lag of about 10 minutes between the rainfall radar observations and the ground precipitation meter observations and the average precipitation in the basin. As a result of examining the ground correction effect of the rainfall radar watershed average precipitation, the correlation between the area average precipitation after correction is rather low compared to the area average precipitation before correction, indicating that the correction effect of the current rainfall radar ground correction algorithm is not high.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.228-235
• /
• 2009

Growth and branch characteristics of 35 half-sib families were surveyed in a seedling seed orchard of Quercus acutissima at ages 10 and 12. The averages of height, DBH (diameter at breast height), branch height, crown width, branch angle and stem straightness at age 12 were 9.96 m, 14.50 cm, 1.04 m, 6.80 m, $18.82^{\circ}$ and 2.58, respectively. Families of 075 and 052 showed superior height growth and 0511 and 0517 were inferior ones. For DBH growth, 075 and 0413 were best families and 0725 and 0511 were inferior families. Pearson's product moment and Spearman's rank correlation coefficients were all positive for all growth traits except branch angle at ages 10 and 12. This result showed that the families with good height and DBH growth were also superior in stem straightness. In ANOVA, there was a highly significant difference among families in height, DBH, cylindric volume and stem straightness. Branch height, crown width and branch angle were also significantly different among families. Family heritability was higher than individual heritability at ages 10 and 12. Height, DBH and stem straightness were under strong genetic control, showing high family heritability. This implies that high genetic gain could be expected by family selection. Expected genetic gain for each trait was estimated based on the family selection. The highest genetic gain was expected for the traits of branch angle, height and DBH because of the large phenotypic standard deviation and the high family heritability. The growth performance and branch characteristics were weighted by the magnitude of genetic variation and heritability. The weighted values were then subjected to estimate family breeding values. This family breeding value would be applied as a criterion in the genetic thinning of the seed orchard.