• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.28-36
• /
• 1996

This experiment was carried out to elucidate the sugar composition of polysaccharides and the structural features of water-soluble polysaccharides(WSP) isolated from Korean oak mistletoe, Loranthus yadoriki Sieb. The 48-hours ball-milled meals of extractive-free dried mistletoe sawdusts were extracted with distilled water for $24hrs{\times}2$ at room temperature. The extracts poured into 95% ethyl alcohol to precipitate. The separated precipitate of WSP, in form of yellowish white powder by lyophilization, was fractionated into four subfractions of WSP-1, WSP-2, WSP-3 and WSP-4 by anion exchange chromatography on DEAE-cellulose column. The sugar composition of WSPs was analyzed by GLC in form of their glycitol acetates, and the structure of polysaccharides in Fractions WSP-1 and WSP-2 was determined by FT-IR and GC-MS after methylation through and acetylation. The sugars of WSPs from Korean oak mistletoe, Loranthus yadoriki, are majorly arabinose and galactose in stem, galactose in leaves very high in content and showed difference in composition and monomeric units between stems and leaves. D-galactose, D-glucose and L-arabinose are the simple sugars consisting of polysaccharides in WSP-1. ($1{\rightarrow}3$)-Linked galactan is the bakcbone with side chain of ($1{\rightarrow}5$)- -L-arabinofuranosyl residues and ($1{\rightarrow}6$)- -D-galactopyranosyl residues, and ($1{\rightarrow}4$)-linked glucan also presents. ($1{\rightarrow}4$)-Linked rhamnogalacturonan and ($1{\rightarrow}4$)- and ($1{\rightarrow}3$)-linked galactan present in WSP-2.

• The Korean Journal of Mycology
• /
• v.24 no.2 s.77
• /
• pp.149-154
• /
• 1996

Effects of various kinds of sawdusts, supplements and culture conditions on activities of several enzymes such as protease, phenoloxidase and cellulase produced from mycelium of P. ostreatus grown on sawdust medium were studied and the results are as follows; Higher specific activity of these enzymes was observed when oak tree sawdust and poplar tree sawdust were supplemented with rice bran or wheat bran at rate of 30%, 20% and 10% in total volume respectively. Higher total activities of protease, phenoloxidase and cellulase were observed at 70% of the moisture contents of culture media, while lower activity of these enzymes was observed with 40% moisture contents of sawdust culture medium. The pH 4 and 9 of the sawdust media appeared to be optimum pH for the. production of protease while pH 5 and 7 were optimal for the production of phenoloxidase. The pH 6 of the sawdust medium was optimal for the production of cellulase. The optimum incubating temperature for the production of protease, phenoloxidase and cellulase was $25^{\circ}C$. Higher total activities of protease and phenoloxidase were observed when culture medium was added with wood vinegar at the control, and 0.5% for cellulase.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.72-78
• /
• 2002

Cultivation of Pholiota adiposa on sawdust media and its mixed substrates with various agricultural by-products was attempted. The composition of each substrates were compared from the viewpoint of cultivation possibilities with the production of Pholiota adiposa. Populus deltoides showed the best production of the mushroom with 795 g, followed by Robinia pseudo-acacia and Quercus acutissima. The mixed sawdust media with 70% of Robinia pseudo-acacia and 30% of Populus deltoides showed the best production of the mushroom with 265 g followed by the mixture of Robinia pseudo-acacia and Populus deltoides with 50% each with 228 g, while the addition of Quercus acutissima showed the negative effect for the production of Pholiota adiposa. Thus, Robinia pseudo-acacia was considered to be an effective amendment for the production of the mushroom. In addition, various kinds of agricultural by-products showed additive effect for the production of the mushroom, too. Therefore, we could concluded that the sawdust of Robinia pseudo-acacia and agricultural by-products can be used to cultivate Pholiota adiposa.

• Journal of Mushroom
• /
• v.7 no.4
• /
• pp.156-162
• /
• 2009

These experiments were carried out to determine the optimal culture conditions for nine strains of collected Hatakeshimeji, Lyophyllum decastes (Fr.:Fr.) Sing. SPA 202 and SPA 205 strains were selected because mycelium grew fast and showed fine density. All strains showed fast mycelial growth and mycelial density on BC(Burke compost) media for 20 days of incubation. The optimal sawdust species for the mycelial growth were the fermented sawdusts of Quercus aliena and Populus deltoides. Spawn running period on the fermented sawdust substrate required 50 days at 20 to $25^{\circ}C$ and additional 7 days after soil casing. Cultivation period and temperature forprimordia formation and fruitbody development appeared from 10 to 11 days and from 7 to 8 days at 17 to $18^{\circ}C$ respectively. The length of pilei and stipes of SPA 202 harvested in optimal stage showed 60mm and 67mm, respectively. Yield of SPA 202 strain grown on fermented sawdust substrate was 130g per 1,100ml in bottle cultivation. The length of pilei and stipes of SPA 205harvested in optimal stage showed 51mm and 81mm, respectively. Yield of SPA 205 strain grown on fermented sawdust substrate was 129g per 1,100 ml in bottle cultivation. SPA 202 strain and SPA 205 strain in artificial bottle cultivation of Lyophyllum decastes used in fermented sawdust substrate were selected as themost appropriate strain in yield.

• The Korean Journal of Mycology
• /
• v.15 no.1
• /
• pp.42-47
• /
• 1987

4 strains of the oak mushroom Lentinus edodes including the strain ASI 3046 were collected home and abroad to investigate the characterics of mycelial growth on synthetic media and sawdust media. The possibility of artificial culture of Lentinus edodes on media composed of different saw dusts and adding materials was investigated. Results were as follows: The optimum temperature for growth ranged from $22^{\circ}C$ to $26^{\circ}C$ among the lineages of Lentinus edodes. The optimal growth temperature for ASI 3046 strain and ASI 3047 strain was $26^{\circ}C$ and $22^{\circ}C$, respectively. The optimal carbon source for ASI 3046 strain was glucose, and peptone and ammoinum tartrate were proved excellent as nitrogen sources. When Lentinus edodes was cultured on sawdust media by varying the mixing ratio of different sawdusts and adding materials, mixed sawdust media composed of oak sawdust(50%, v/v), poplar sawdust(50%, v/v), acorn powder(5%, v/v) and rice bran(10%, v/v) showed higher yields of fruit bodies. Results showed that the ideal strain of Lentinus edodes for artificial culture on sawdust media was strain ASI 3046.

• Journal of Korean Society of Forest Science
• /
• v.80 no.4
• /
• pp.436-444
• /
• 1991

To increase both the production of mushrooms and the usages of the residues (used media) for roughage, the pinchips(PC) and sawdusts(SD) of three Korean oak species were tested as cultivating media for Lentinus edodes with varing the composition of the media. The results are as follows. 1. Organic acids(tannic acid and citric acid), which were added in the PC medium to enrich the quality of mushrooms, did not increase the growths of the mycelia and the quality. 2. The mushrooms were able to be harvested from six months after beginning the cultivation. No significant differences were found among the qualities of the mushrooms produced by various treatments. 3. The contents of crude proteins(1.82-4.55%) in the used media were higher than those in woods (c.a. 0.7%), and the total digestible nutrients (44.0-46.0%) in the used medium were not much different from those in rice straws (c.a.48.0%). 4. The contents of some essential amino acids (methionine in the used medium of the tannic acid added PC or S.D. and isoleucine, phenylalanine and lysine in the used medium of the untreated PC or SD) were higher than those in the control (raw media). The contents of a few other essential amino acids (threonine, valine and arginine) were lower in the used media. Most nonessential amino acids in the used media, particularly in the used bed-log, appeared to decrease than those in the control.

• Journal of Mushroom
• /
• v.14 no.1
• /
• pp.1-5
• /
• 2016

To minimize cultivation costs, prevent insect-pest infestation, and improve the production efficiency of thermophilic mushrooms, plant substrates obtained from local areas in Cambodia were used for production of both spawn and mushrooms. In this experiment, different sawdusts different organic wastes and grain ingredients and analyzed for improvement of spawn-production efficiency. Four thermophilic mushroom species, Pleurotus sajor-caju (oyster mushroom, Sambok), Ganoderma lucidum (deer horn shaped), Auricularia auricula (ear mushroom), and Lentinula edodes (shiitake), were used to identify efficient new substrates for spawn and mushroom production. Although the mycelia in the rubber tree sawdust medium showed a slightly slower growth rate (10.9 cm/15 days) than mycelia grown in grains (11.2 cm/15 days in rice seeds), rubber tree sawdust appeared to be an adequate replacement for grain spawn substrates. Th findings indicate that rubber tree sawdust, sugarcane bagasse, and acacia tree sawdust supplemented with rice bran and calcium carbonate could be new alternative the substrates for. Although sugarcane bagasse and rubber tree sawdust showed similarly high biological efficiencies (BE) of 60% and 60.8%, respectively, acacia tree sawdust exhibited relatively a low biological efficiency of 22.4%. However, it is expected that acacia sawdust has potential for the mushroom cultivation when supplemented with currently used sawdust substrates in Cambodia, because of its relatively low price. The price of the sawdust (20 kg sawdust= 6500 Riel or 1.6 USD) currently used was 6.5 times higher than the price of acacia sawdust (201000 Riel or 0.25 USD). Therefore, utilization for acacia sawdust for mushroom cultivation could become feasible as it would reduce by producing costs of mushrooms in rural areas of Cambodia.

• Journal of Korean Society of Forest Science
• /
• v.77 no.2
• /
• pp.252-257
• /
• 1988

This study was carried out to investigate the physical and mechanical properties of sawdust boards combined with sycamore and polypropylene-net flakes. Both the sycamore and polypropylene-net flakes were adjusted to the sizes of $1.0{\times}1.0$, $1.0{\times}2.0$, and $1.5{\times}1.5cm^2$ and these flakes were mixed at 1, 2, 3, and 4% levels based on ovendry weights of sawdusts, respectively. The results obtained in this study were summarized as follows : 1. Thickness swellings of sawdust boards combined with sycamore flakes decreased with the increase of mixture levels and similar effects were also recognized in combination with polypropylene-net flakes. 2. Moduli of rupture both in sawdust boards combined with sycamore and polypropylene-net flakes increased with the increase of their mixture levels, and sawdust boards combined with sycamore flakes of $1.0{\times}2.0cm^2$ size and polypropylene-net flakes of $1.5{\times}1.5cm^2$ size showed higher moduli of rupture than control boards. 3. Moduli of elasticity both in sawdust hoards combined with sycamore and polypropylene-net flakes increased with the increase of their mixture levels as in moduli of rupture. 4. The physical and mechanical properties of sawdust boards combined with sycamore and polypropylene-net flakes were mainly dependent on aspect ratio of sycamore flakes and size of polypropylene-net flakes respectively, and these properties were improved with the respective increase of aspect ratio and size.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.265-274
• /
• 1998

This study was carried out to obtain the basic data for an artificial cultivation of Phellinus sp.. The optimum conditions for the mycelial growth on the different sawdusts (Quercus aliena, Morns alba and Alnus japonica) substrate of an isolated Phellinus sp. were optimized by response surface methodology. The ratio of rice bran addition to sawdust and the suitable moisture content for the mycelial growth in the all sawdust media were about 30% (w/w) and $65{\sim}70%$ (w/v), respectively. The initial pHs for the mycelial growth of Quercus aliena and Morns alba were in the range of $pH\;5{\sim}6$, whereas Alnus japonica was obtained at pH 6. The optimum temperature for the mycelial growth was about $25{\sim}30^{\circ}C$, depending on the different kinds of wood substrates. From the response surface analysis, the values of independent variables of Quercus aliena at stationary points were determined to be 31.01 % (w/w) of rice bran, pH of 5.31 and 69.03% (w/v) of moisture content, and the expected value of mycelial growth was about 8.32 cm. Both the ratio of rice bran addition to sawdust $(X_1)$ and moisture content $(X_3)$ were effective to the mycelial growth. In the case of Morns alba, the ratio of rice bran addition to sawdust, initial pH and moisture content at the stationary points were 28.77% (w/w), 5.28 and 69.8 (w/v),respectively, and the expected mycelial growth of 7.60 cm was obtained. Stationary points for the mycelial growth in the sawdust media of Alnus japonica were 28.74% (w/w) of rice bran, pH of 6. 04 and 66.96% (w/v) of moisture content, and the expected values of mycelial growth was about 5.38 cm. Based on the above results, there was correlations between the mycelial growth and independent variables, and the effect of rice bran $(X_1)$ and initial pH $(X_2)$ for the mycelial growth were higher than the moisture content $(X_3)$. The optimum species of sawdust media for the my celial growth of Phellinus sp. was in the order of Quercus aliena > Morns alba > Alnus japonica.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.1
• /
• pp.21-44
• /
• 1988

As a way for the effective utilization of pallman chips and sawdusts, these furnish materials were combined with non-woody material of plastic (polypropylene) screen in board manufacturing to improve their weak physical and mechanical properties. The conventional boards were made with conditions of specific gravity 0.40, 0.55, 0.70, and 0.85, resin content 8, 10, 12 and 14%, and number of polypropylene screen 1, 2, 3 and 4, and press-lam boards were also manufactured. The physical and mechanical properties were measured and discussed on thickness swelling, bending modulus of rupture and elasticity, tensile strength, internal bond strength, and screw holding strength. The results obtained at this study were summarized as follows: 1. In thinckness swelling both of pallman chip board and sawdust board were improved by the increase of resin content, and press-lam boards showed lower thickness swelling than conventional boards. 2. Both the modulus of rupture and elasticity were increased with the increase of specific gravity, and press-lam boards showed higher modulus of rupture and elasticity than conventional boards. On the other hand, modulus of rupture was increased with the increase of number of polypropylene screen and resin content whereas these effects in modulus of elasticity was not recognized. 3. Tensile strength was increased with the increase of specific gravity, and the boards combined with polypropylene screen showed higher tensile strength than control boards. Also tensile strength was increased with the increase of number of polypropylene screen, and press-lam boards revealed higher tensile strength than conventional boards. 4. Internal bond strength was increased with the increase of specific gravity, and the boards combined with polypropylene screen were lower in internal bond strength than control boards. Also, the boards combined with odd number of polypropylene screen showed lower internal bond strength than those combined with even number of polypropylene screen. 5. Screw holding strength was increased with the increase of resin content and specific gravity but significant difference was not approved between boards combined with polypropylene screen and control boards. In press-lam boards, pallman chip boards of higher specific gravity but sawdust boards of lower specific gravity showed better screw holding strength than control boards.