• Journal of the Korean Wood Science and Technology
• /
• v.34 no.2
• /
• pp.30-36
• /
• 2006

Wood fuel must be dried before combustion to minimize the energy loss. Sawdust of Japanese red pine was dried in a batch type fluidized-bed to investigate the drying characteristics of sawdust as a raw material for bio-fuel. The minimum fluidization air velocity was increased as particle size was increased. It took about 21 minutes and 8 minutes to dry 0.08 m-deep bed of particles with average particle size of 1.3 mm from 100% to 10% moisture content at air temperature of $20^{\circ}C$ and $50^{\circ}C$, respectively.

• Journal of Animal Environmental Science
• /
• v.1 no.1
• /
• pp.9-19
• /
• 1995

This study was carried out to investigate the effect of sawdust bedding barn on manure handing, management labour and physiological aspect of dairy cows, and then to establish the criteria on the optimum utilization method of sawdust bedding barn. 46 tie stall barns and 49 sawdust bedding barns were surveyed to cmopare the milk productivity between two different barns, and also 5 tie stall barns, 15 sawdust bedding barns and 1 rice hull bedding barn were selected to study the utilization situation of sawdust barn in Kyung-Ki province area. The major results obtained were as follows; 1. The roof material of sawdust barn were consisted of 66% vinyl house, 23% PVC light and 11% slate and galvanum coated tin. Most of the floor structure was earth ground with the rate of the approximately 82%. 2. The average occupied area of sawdust bed per cow was 15.2 $m^2$, depth that 30 cm and the utilization period was 12 months. 3. Milk Yield was significantly higher at sawdust barn than at tie stall barn(P<0.01). Bacterial and somatic cell count in raw milk were less at the sawdust barn than in tie stall barn. However, there was not significance difference between two barns. 4. The labour hour needed to cow management in the sawdust barn was approximately 48% of that of tie stall barn. 5. The temperature and moisture content measured in sawdust bed were closely affected by seasonal ambient temperature. The skin and hair of cow were much cleaner at the PVC light roofed sawdust barn than any other roof materials. 6. The additives used for improving of fermentation did not show any effect on temperature and moisture content in sawdust bed. When the ambient temperature was $30.4^{\circ}C$, the surface temperature of measured 1 cm above the sawdust bed was $12.2^{\circ}C$ lower and the temperature of 100 cm above the sawdust bed was $2.4^{\circ}C lower under shading net facility than that of vinyl roofed one.7. The hoof length of miking cow was 7.95 cm in tie stall and 9.19 cm in sawdust barn with high significance (P<0.01). And disease occurence such as mastitis and foot-rot tended to decrease in the sawdust barn. 8. The number of total bacteria and coliform bacteria were less in the sawdust bed compared with earth ground resting area. And a parasite strongyloides papillosus was detected but without any infected cow. 9. The nitrate($NO_3N$) content in non-roofed earth ground resting area and earth ground under the sawdust bed was likely to pollute the ground water. 10. In economic point of view, rice hull bedding barn was the cheapest among different systems. And in the sawdust bedding barn PVC light + slate roofed barn was most desirable, and vinyl roofed one the least.

• Journal of Animal Environmental Science
• /
• v.1 no.2
• /
• pp.117-124
• /
• 1995

This study was carried out to investigate the effect of depth of sawdust bedding and ground material in dairy cattle barn. Treatment included the concrete floor with a 10cm or 30cm sawdust and the earth floor with a 30cm sawdust. Eighteen cows were assigned to 3 pens with 16.5㎥/head bedding area. The results obtained were as follows : 1. The temperature of sawdust bed was highest in the earth floor with 30cm sawdust, and the moisture content of sawdust bed was highest in the concrete floor with 10cm sawdust bed. 2. Cows defecate feces 9.2, 8.7 and 9.3 times a day in 10cm sawdust on concrete floor(10S+C), 30cm sawdust on concrete floor(30S+C) and 30cm sawdust on non concrete floor(30S+ NC) respectively. In average, they excreta 9.1 times/day(85.8%) in the sawdust beds and 1.5 times/day(14.2%) in the feeding alley. 3. The ratio of daily water amount deposited vapor to total water amount deposited in sawdust beds was 74.0%, 61.5% and 47.1% in 10S+C, 30S+C and 30S+NC respectively. 4. N.P.K contents in the sawdust beds were higher for 10S+C compared with other treatments. 5. When 30cm of sawdust was applied on the earth ground NO$_3$-N contents in the sawdust bed was 37.7, 14.1 and 15.0ppm in depth of 30, 60 and 90cm under the ground, respectively, indicating some possibility of water pollution.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.19-28
• /
• 1998

For cultivation on sawdust-bed of oak-mushroom until present time, inoculation of spawn on sawdust bed has been performed by sawdust spawn. But, liquid spawn may have advantages for rapid mass production of spawn, and now, sawdust-cultivation by liquid spawn inoculation should be applied instead of sawdust spawn. Therefore, investigations were performed to evaluate the effect of sawdust-cultivation by liquid spawn inoculation. The results were as follows: 1. When 11 kinds of liquid media were applied, the oak-mushroom culture medium was the most excellent in growth. Most suitable temperature at PDA was $25^{\circ}C$, and $22.5\sim27.5^{\circ}C$ in range were optimal for liquid culture. In liquid culture, amount of mycelial growth increases rapidly up to 40 days of cultivation. Incubation at fermentor brought yield of 106mg dry mycelia per 40ml media after 17 days. 2. In 1l-spawn bottle, growth of mycelium by inoculation of 20ml-liquid spawns were faster than 6g-sawdust spawn in spread of mycelia. On 2kg-bag culture, inoculations of 10ml-, 20ml- and 30ml-liquid spawns were all slower than 20g-sawdust spawn in mycelial spread. So, amount increasement in ampunt of liquid spawn should be discussed. Yields of mushrooms until third sproutings of 2kg-bag culture were 580g in 30ml-liquid spawn inoculation, but 510g, 486g and 470g from 20g-sawdust spawn, 20ml-liquid spawn and 10ml-liquid spawn, respectively. Thus, 30ml-liquid spawn inoculation was highest in yield.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.434-442
• /
• 2015

The process of cultivation and production of oak mushroom (Lentinula edodes (Berk.) Pegler) on sawdust surface beds were investigated. Sawdust surface bed cultivation is the method by which oak mushrooms are cultured and produced on sterilized sawdust surface bed without using bags. The bed was made by inoculating with 3 to 1 ratio of bed sawdust to oak mushroom mycelial inoculum. The sawdust bed medium with 65% water content was pasteurized at $65^{\circ}C$, inoculated with sawdust spawn and spread on the surface on vinyl film in cultivation shed. During 78 days of cultivation period, water content in the medium varied from 61 to 72%, its pH decreased from 5.6 to 3.9~4.6 and ergosterol concentration increased to $0.33{\sim}0.59{\mu}g/g$. $CO_2$ concentration in the medium rapidly increased to 8.06% in two weeks. In seven weeks the medium surface started browning and $CO_2$ concentration increased to about 5.63%. Until 11th week the $CO_2$ concentration was maintained at 6~7%. After removing the plastic cover on the bed for ventilation in 12 weeks, $CO_2$ within the bed reduced dramatically to 1.5%. In the cultivation shed the internal temperature was $7.1{\sim}29^{\circ}C$ and humidity was 27.3 to 100%, while bed temperature ranged $11.6{\sim}30^{\circ}C$. Oak mushroom fruiting started from late July, in 120 days after bed establishment in late March and continued for approximately 100 days until early December with eight cycles of irrigation treatment. The mushroom yield of the eight cycles were 288~352 kg during the 1st (7/29~8/4) to 3rd cycle (9/3~9/7), 800 kg at the 4th cycle (9/19~9/24), 1,296~1,853 kg during 5th (10/3~10/8) to 7th cycle (4.11~11/9) and 990 kg at 8th cycle (11/23~12/7). Total production was approximately 7.4 tons from 33.0 tons of oak sawdust medium, thus harvest efficiency of the mushroom production was approximately 22.4%.

• The Korean Journal of Mycology
• /
• v.50 no.3
• /
• pp.161-171
• /
• 2022

The edible paddy straw mushroom Volvariella volvacea (Bull. ex F.) Singer has high nutritional and medicinal values. They are grown on a wide variety of agricultural by-products using different several methods. The result of this present study showed that type of bed and cultivation condition (outdoor/indoor) had effects on the yield of paddy straw mushrooms grown on the spent oyster mushroom sawdust. The treatment of circular compact bed under indoor cultivation condition (CYIC) had the best yield and biological efficiency (B.E.) with 2,119.2 g/bed and 14.5%, respectively, followed by the treatment of conventional bed under outdoor cultivation condition (COOC) with the yield and B.E. of 1,935.5 g/bed and 13.2%, respectively, but the lowest yield and B.E. were observed in the treatment of conventional bed under indoor cultivation condition (COIC) with 1,226.1 g/bed and 8.4%, respectively. Paddy straw mushrooms cultivated on spent oyster mushroom sawdust should be proper in both outdoor and indoor conditions by conventional and circular compact methods as well. However, in indoor conditions, paddy straw mushrooms should be grown in a circular compact bed to ensure the temperature of the bed is suitable for the mushroom growth.

• The Korean Journal of Mycology
• /
• v.43 no.2
• /
• pp.104-111
• /
• 2015

In this study, a new strain of Lentinula edodes (Shiitake) Poongnyunko was bred from dikaryotic KFRI 490 and monokaryotic KFRI 536 by Di-mon crossing method. In this study, the productivity was conducted through bed-log and sawdust substrate cultivation. The Poongnyunko showed significant intensive production from summer to autumn. Optimum temperatures of fruit-body formation were $17{\sim}24^{\circ}C$. The total amount of fruit-body production during 4 years by bed-log cultivation was $22kg/m^3$, and total yield of fruit-body until the 3rd flush was 648 g/ 2 kg. In case of sawdust substrate cultivation, the mycelial incubation period was 110~130 days. The suitable temperature and relative humidity were $18{\pm}1^{\circ}C$ and $90{\pm}5%$ respectively.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.478-482
• /
• 2016

In this study, a bubbling fluidized bed pyrolyzer (0.076 m I.D. and 0.8 m high) was employed to investigate the fast pyrolysis characteristics of larch sawdust which is abundant in Korea. The effects of operation conditions, such as bed temperature ($350-550^{\circ}C$), fluidization velocity ratio ($U_o/U_{mf} $: 2.0-6.0) and feeding rate (2.2-7.0 g/min) on product yields and their chemical components were studied. The number of chemical compounds in the bio-oil decreased with the increasing bed temperature because of secondary pyrolysis. The effects of the Uo/Umf ratio and feeding rate on bio-oil compositions were relatively lower than those of the bed temperature.

• Journal of Animal Environmental Science
• /
• v.2 no.1
• /
• pp.53-62
• /
• 1996

This experiment was conducted to investigate the effect of the reuse of sawdust fermented with swine excretion as bed material on the growth performance of pigs. The sawdust which was already fermented with swine excretion in the pig house for eight months was transported to a fermentation facility for secondary fermentation. A total of 96 pigs with average 30kg of initial body weight were randomly assigned in the $2{\times}2$ factorial design with two levels(0%, 1.5%) of probiotics added for secondary fermentation and two levels(0%, 1.5%) of probiotics in feed. The results obtained are as follows : 1. Total-nitrogen(T-N), $K_2O$, total-carbon(T-C), and carbon/nitrogen(C/N) in sawdust bed showed no significant difference within treatments, but phosphate increased by 57% in average compared to the initial. 2. There was no significant difference in temperature in the sawdust bed treatments. 3. The internal parasite eggs detected were Trichuris suis, Strong. ransomi, Ascaris suum, Coccidia and Balantidium coli. 4. The utilization period of sawdust fermented with swine excretion was 52, 26, 16, 4, 5, 3 days, respectively, with increase of body weight. 5. Average daily gain and feed conversion were significantly improved by adding probiotics in the feed(P<0.05), but there was no difference between fermented sawdust with or without probiotics. 6. There was no significant difference in carcass weight and backfat thickness of pig among treatments(P>0.05).

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.63-68
• /
• 2007

An experimental study was carried out to investigate gasification process of wood sawdust in the 1-dimensional downdraft fixed bed gasifier. The preheated air which was used oxidizer and steam were used as a gasifying agent. The downdraft fixed bed gasifier obtains more amount of hydrogen and methane by increasing residence time of supplied air. The operating parameters, the supplied air temperature and steam were used. The oxidizer temperature was varied from 500K to 620K and vapor was added. The gasification process was monitored by measuring temperature at three position near the biomass using R-type thermocouples and the syngas composition was analyzed by gas chromatograph. We get the sample gas at the end of gasifier and it was eonugh time to finishing the chemical reaction. Finally, the amount of hydrogen and methane were increased widely as increasing the oxidizer temperature and adding steam.