• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.10
• /
• pp.748-756
• /
• 2009

The effect of idling stop on $CO_2$ reduction was estimated, especially in the area of in-use vehicles. In order to know the fuel saving for each class of vehicles, a methodology to calculate the fuel saving was used along with a standard test using NIER-07 mode. Idling stop execution rate was estimated by analyzing the driving pattern of the in-use city buses, which shows about 75% at maximum. And this corresponds to about 5.4% reduction of the daily total fuel consumption. Finally, $CO_2$ reduction in the automotive sector was estimated, which concludes that, when idling stop device is used, about 480 thousand and 450 thousand tons of $CO_2$ could be reduced with in-use city buses and taxis, respectively. This amount corresponds to about 1.2% of $CO_2$ reduction in the automotive sector.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4012-4018
• /
• 2013

This paper proposes an energy conservation scheme when apartment remodeling is provided, which analyzes the energy conservation techniques that are suitable for overseas passive houses. Subsequently, a passive solution that is more suitable for our country is derived. In order to examine the energy saving rate applying to passive solution, it evaluates the energy saving rate of 5 specific cases by taking advantage of internal building energy efficiency rating certification system, classifies them and analyzes them. Finally, a rational alternative is devised, and then which is implemented in the internal apartment housing remodeling project. This scheme can save 40% of the energy in comparison with typical apartment building.

• The Journal of Information Systems
• /
• v.19 no.1
• /
• pp.1-17
• /
• 2010

This paper proposes an updating policy of indoor moving object databases (IMODB) for location-based services. our method applies the Ka1man filter on the recently collected measured positions to estimate the moving object's position and velocity at the moment of the most recent measurement, and extrapolate the current position with the estimated position and velocity. If the distance between the extrapolated current position and the measured current position is within the threshold, in other words if they are close then we skip updating the IMODB. When the IMODB needs to know the moving object's position at a certain moment T, it applies the Kalman filter on the series of the measurements received before T and extrapolates the position at T with the estimations obtained by the Kalman filter. In order to verify the efficiency of our updating method, we performed the experiments of applying our method on the series of measured positions obtained by applying the fingerprinting indoor positioning method while we are actually walking through the test bed. In the analysis of the test results, we estimated the communication saving rate of our method and the error increment rate caused by the communication saving.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.5
• /
• pp.53-58
• /
• 2009

Entering in the time of high oil price, seriousness of an energy effect sector has given a huge impact and the importance of energy is growing. Especially, building energy occupying 24% of total demand of energy can be expected to reduce energy demand more than other section. To do this, the Building Energy Rating System is applied and implemented in Apartment houses on Jeju, South and Central region. This system calculates into energy saving rate, and certifies the building energy rating. This study evaluates the energy saving rate and rating and compares the difference in energy savings considering to each region and the thermal performance of the window. In result, the standard of the assessment house which is applied to the build energy rating system is demanded to distinguish the thermal performance of window according to regional variation.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.15-20
• /
• 2009

Entering in the time of high oil price, seriousness of an energy effect sector has given a huge impact and the importance of energy is growing. Especially, building energy occupying 24% of total demand of energy can be expected to reduce energy demand more than other section. To do this, the Building Energy Rating System is applied and implemented in Apartment houses on Jeju, South and Central region. This system calculates into energy saving rate, and certifies the building energy rating. This study evaluates the energy saving rate and rating and compares the difference in energy savings considering to each region and the thermal performance of the window. In result, the standard of the assessment house which is applied to the build energy rating system is demanded to distinguish the thermal performance of window according to regional variation.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.100-106
• /
• 2011

This study proposes a $CO_2$ emission reduction method through correlation analysis of a sample building. First, energy saving factors of heating, cooling, lighting were determined for the correlation analysis and $CO_2$ emission contribution rate of the design parameters have been analyzed. Then optimal combination of each design parameter has been drawn. Heat transfer coefficient of walls and windows, air permeability, windows area ratio, and shading devices were selected as applicable energy saving factors of the sample building. Also computer simulation was conducted using experimental design by Orthogonal Arrays of the statistical method. And the contribution rate was estimated by Analysis of Variance-ANOVA. As a result, the $CO_2$ emission in heating was reduced to 51.9%; in cooling to 16.8%; and in lighting to 2% compared to the existing building. The majority of the reduction was presented by heating energy.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.254-259
• /
• 2009

The mixed cooling dryer has been developed significantly by adopting both advantages of cooling dryers and desiccant dryers. In this study, it is introduced that the desired effect, such as drying rate period reduction and energy-saving, could be achieved only by adding the desiccant dryer if an existing cooling dryer is used. The experiment should be conducted for quite long time due to the material selection, so it is regrettable that there are not enough data.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.4
• /
• pp.53-64
• /
• 2020

The purpose of this study is to analyze outcome of the project to improve old water supply facilities in Airforce Base to improve water revenue rate. To achieve the objective of this study, First, literature review is conducted to clearly define the concept of water revenue rate improve project. Second, WASCO project on 2 Airforce base review and smart water management pilot project on 1 Airforce base is conducted. Third, economical analysis of project is conducted to examine the outcome. As a result, WASCO and smart water management pilot project on Airforce base was effective to improve water revenue rate. Finally, the improvements were suggested after investigating the key factors on water revenue rate improve project. In the future, this study will be used as a baseline for developing water revenue rate improve project.

• Korean Journal of Clinical Pharmacy
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2001

This research is conducted to evaluate the clinical and economic benefits from therapeutic drug monitoring(TDM) service on vancomycin in a tertiary general hospital. Total 99 pairs of steady state peak and trough concentrations of vancomycin were obtained from 73 patients. To see the clinical benefits, the appropriateness of vancomycin dosing before TDM was evaluated. In 72 pairs of vancomycin blood concentrations obtained prior to TDM consultation, $47.2\%$ of the cases had reached within therapeutic range. Serum vancomycin levels in patients with $40{\leq}CLcr<60$ (ml/min) were higher and than the levels in patients with 40>CLcr and $60{\leq}CLcr$ (ml/min). Dose reduction rate in patients with creatinine clearance $40{\leq}CLcr<60$ (ml/min) were also significantly higher than those of compared groups ($61.5\%$, p=0.0138). Serum vancomycin concentrations were re-obtained from 21 patients who received modified dose through TDM service. Ninety percent (19/21cases) of them were within the target therapeutic range. For the evaluation of economic benefits from TDM consultation, estimated cost savings were calculated in those patients. The total drug saving were 586 vials in 21 patients. The calculated mean cost saving from the drugs was 314,570 won (range: $11,273\sim473,466)$ per patient. The study revealed that TDM service for vancomycin is necessary because empirical dosing is not effective for obtaining therapeutic drug level, especially patients with mild renal insufficiencies. The cost saving from TDM is also beneficial for the patients.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.475-478
• /
• 2002

Post-harvest treatment for barley production requires many steps including drying, cleaning, and packing, and these steps be needed many labor input. Rice processing complex (RPC) is useful for post harvest management system in rice production. However, it is rare to be used for barley production. This study was conducted to explore the variations of quality and labor saving between conventional method and bulk-management system in post-harvest using RPC. The sorting rate was not different between manual method and bulk management. The hardness of non-polished grain was ranged 10,175-10,329 g/$3.14mm^2$, and that for non-polished grain was higher than that for polished grain, but there was not different between drying method. There was not be showed the hunter's value such as L, a and b according to drying method. Cooking characters such as water absorption ratio, swelling ratio, and water soluble extracts by circulated or continued dryer was higher than manual drying using solar heat. Labor input per ha for each cultivation process in bulk-management of barley using rice processing complex was 21 hours, compared to 46 hr/ha in the conventional method, labor input was greatly saved by up to 54.3% in the post-harvest bulk management system.