• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.498-500
• /
• 2004

QPSK (Quaternary Phase Shift Keying) will be adopted as the modulation of HRIT (High Rate Information Transmission) which is transmitted to COMS (Communication, Ocean and Meteorological Satellite) through HPA (High Power Amplifier) in ground segment. Due to the nonlinearity of HPA, IMD (Inter-Modulation Distortion) of multi-carrier signals and PAPR (Peak-to-Average Power Ratio) of modulated HRIT must be considered to estimate the output power of HPA. In this paper, we measured the PAPR to various the roll-off factor of RRC (Root Raised Cosine filter) which is filtering the modulated HRIT signal for reducing ISI (Inter-Symbol Interference) and bandwidth. It was found that the minimum PAPR is 2.78dB at 0.5 of roll-off factor for scrambled data. It's 2.78dB of P APR will be in output power selecting in COMS earth station.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.208-211
• /
• 2006

The contents of RF test set which can be used for checking the function and performance of 13m antenna installed in KARI site are described in this paper. For the purpose of considering RF test set as the transceiver in COMS, it is designed to retransmit the LRIT and HRIT in L-Band after receiving them in S-Band from 13m antenna. Additionally, this set has a function to turnaround raging tone used for the measurement of distance between satellite and 13m antenna. The required all equipments of RF test set are summarized with configuration. Measurements of several equipments which have already been delivered are described in this paper. The assembled RF test set will be used for the verification of 13m antenna

• Korean Journal of Geomatics
• /
• 제3권1호
• /
• pp.53-57
• /
• 2003

As the Korea Multi-Purpose Satellite-I (KOMPSAT-1) satellite can roll tilt up to $\pm$45$^{\circ}$, we have analyzed some KOMPSAT-1 EOC images taken at different tilt angles for this study. The required ground coordinates for bundle adjustment and geometric accuracy are obtained from the digital map produced by the National Geography Institution, at a scale of 1:5,000. Followings are the steps taken for the tilting angle of KOMPSAT-1 to be present in the evaluation of geometric accuracy of each different stereo image data: Firstly, as the tilting angle is different in each image, the characteristic of satellite dynamic must be determined by the sensor modeling. Then the best sensor modeling equation should be determined. The result of this research, the difference between the RMSE values of individual stereo images is mainly due to quality of image and ground coordinates instead of tilt angle. The bundle adjustment using three KOMPSAT-1 stereo pairs, first degree of polynomials for modeling the satellite position, were sufficient.

• 항공우주시스템공학회지
• /
• 제8권1호
• /
• pp.42-47
• /
• 2014

The role of Electrical Power Subsystem (EPS) is to generate a power and distribute it to the electrical devices for the system operation. For on-orbit operation of cube satellite, it is also necessary to supply power to on-board mission devices as commercial satellite does. Recently, commercial EPS products dedicated for the cube satellite application has been developed and widely used for the power subsystem design. In this paper, a permanent magnet attitude stabilization method without external power has been introduced because it has advantage from power consumption point of view and the EPS design of cube satellite by applying the commercial EPS products has been introduced and investigated. This paper also deals with the specification of the commercial EPS products for the beginner of the cube satellite design.

• 항공우주기술
• /
• 제9권1호
• /
• pp.84-92
• /
• 2010

통신해양기상위성의 명칭인 천리안위성 발사를 앞두고 위성운용을 위한 지상시스템의 검증이 실제 위성과 위성시뮬레이터 등을 이용하여 수행되었다. 본 논문에서 특히 시뮬레이터가 적용된 지상시스템 시험 부분을 중점적으로 분석하여 시뮬레이터의 활용시간, 활용범위, 활용비중 등을 기술한다. 아울러 시스템 검증을 위한 시뮬레이터의 적용 경험을 바탕으로 시뮬레이터의 효과를 설명하고 한계점과 개선방향을 제시한다.

• 대한원격탐사학회지
• /
• 제36권6_2호
• /
• pp.1493-1507
• /
• 2020

KOMPSAT-3A는 2015년 3월 발사하여 약 6개월의 기간 동안 초기 검보정을 수행한 이후 지난 8년 동안 성공적으로 KOMPSAT-3A 자료를 사용자들에게 배포하였으며, 수집된 영상 자료는 지도제작, GIS, 국토관리 등의 다양한 분야에서 정성적, 정량적 정보 추출의 기초 자료로 활용되고 있다. 한국항공우주연구원에서는 KOMPSAT-3A의 영상제품군에서 추출되는 정보의 정확도 및 신뢰도를 확보하기 위해 주기적으로 영상 품질과 인공위성 하드웨어 특성을 확인하고 있다. 또한 KOMPSAT-3A의 탑재체, 자세제어 센서들의 노후화에 따른 영상 품질 저하 현상을 최소화하기 위해 지속적인 영상 품질 개선 작업을 수행하고 있다. 본 논문에서는 KOMPSAT-3A 개발 단계에서 정의된 발사 전후의 검보정 주요 과정 및 대표 영상 품질 인자인 MTF, SNR, Location accuracy 측정 방법을 설명하였다. 이를 바탕으로 발사 후 초기 LEOP Cal/Val이 완료된 이후 측정된 영상 품질 인자별 성능값과 최근 2016년부터 2020년 5월까지 KOMPSAT-3A호의 주요 품질 인자인 MTF, SNR, Location accuracy 현황과 특성을 기술하였다.

• 대한원격탐사학회지
• /
• 제18권1호
• /
• pp.53-59
• /
• 2002

The MSC is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a GSD(Ground Sample Distance) of 1 m over the entire FOV(Field Of View) at altitude 685 km. The instrument is designed to haute an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data compression/storage. The MSC instrument has one channel for panchromatic imaging and four channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI(Time Belayed Integration) CCD(Charge Coupled Device) FPA(Focal Plane Assembly). The MSC hardware consists of three subsystem, EOS(Electro Optic camera Subsystem), PMU(Payload Management Unit) and PDTS(Payload Data Transmission Subsystem) and each subsystems are currently under development and will be integrated and verified through functional and space environment tests. Final verified MSC will be delivered to spacecraft bus for AIT(Assembly, Integration and Test) and then COMSAT-2 satellite will be launched after verification process through IST(Integrated Satellite Test). In this paper, the introduction of MSC, the configuration of MSC electronics including electrical interlace and design of CEU(Camera Electronic Unit) in EOS are described. MSC Operation parameters induced from the operation concept are discussed and analyzed to find the influence of system for on-orbit operation in future.

• 항공우주기술
• /
• 제11권2호
• /
• pp.33-38
• /
• 2012

지구 저궤도 위성은 발사체에서 분리된 이후 탑재 소프트웨어에 의해 자동으로 초기 동작을 수행한다. 이후 본체 초기 점검 기간 동안의 지상국 접속을 통해 정상 운용 모드로의 전환을 준비한다. 먼저 태양 전지판 전개 여부를 포함한 위성의 건강 상태를 확인한 이후 각 장치의 기능을 점검한다. 정상 운용 모드에 사용되는 모든 장치의 활성화가 완료된 이후 영상 촬영을 위한 기동 성능을 점검하며, 궤도 조정을 위한 기능을 점검한다. 초기 기능 점검은 한정된 지상국 교신 시간동안 수행되므로 사전에 모든 절차가 상세히 설계되어야 한다. 초기 점검 절차는 지상국 접속 시간에 따라 구분되어 수행된다. 또한 발생 가능한 모든 상황을 대비한 절차도 준비되어야 한다. 정상적인 점검 절차 수행 중에 발생할 수 있는 다양한 상황 및 예상치 못한 긴급 상황에 대한 조치 절차도 준비되어야 한다. 이러한 긴급 절차도 지상국 교신 시간을 고려해 설계된다. 저궤도 위성은 성공적으로 발사되었으며, 본체 초기 점검도 성공적으로 완료되었다. 이 논문에서는 저궤도 위성의 본체 초기 점검 설계 및 수행 결과에 대해 설명한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.356-359
• /
• 2006

The high prices and lack of information for satellite images prevent researchers from studying remote sensing and most non-professional people can't have the simple and easy solutions for the manipulation of satellite images. 'Satellite Imagery Information Management Center'(SIMC) project which is promoted by ETRI (Electronics and Telecommunications Research Institute) from 2002 to 2005 in Korea have the purpose to provide the satellite images freely to the public domain and the solutions for the above mentioned problems. Our project have the following five systems; Data Acquisition System, Data Preservation System, Integrated Solution System, Technology Development System, Operation Plan System. Data Acquisition System collects the satellite images such as LANDSAT, IKONOS, etc. Data Preservation System consists of database which registers the diverse satellite images. Integrated Solution System gives the user of public domain for the web service which search, order and transfer the satellite images. Technology Development System has the many processing technologies for the satellite images. Finally, the Operation Plan system has the role to plan the future of our SIMC project. In this paper, we will give the result of SIMC Project for each five systems during the fast four years from 2002 to 2005.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권1호
• /
• pp.51-58
• /
• 2022

Korea Augmentation Satellite System (KASS) is a Satellite Based Augmentation System (SBAS) system under development in South Korea and aims to provide air navigation services after 2023. In order to provide reliable service, detailed design for the operation of this system is required. This paper proposes a detailed operation-based designs based on mission, architecture, operation definition of the system. For the stable operation of the system, an operation organization was designed and operation activities were classified in consideration of the architecture and function of the system. Detailed operation procedures were designed according to this classification and operation procedures related to the command and configuration of subsystem were verified on the Integration, Verification and Qualification (IVQ) platform for integrated testing and verification. The proposed operation concepts and procedures will be continuously confirmed and verified during verification, qualification and service preparation, and will be updated event after official KASS service.