• ETRI Journal
• /
• 제36권4호
• /
• pp.519-527
• /
• 2014

An integrated multi-beam satellite and multi-cell terrestrial system is an attractive means for highly efficient communication due to the fact that the two components (satellite and terrestrial) make the most of each other's resources. In this paper, a terrestrial component reuses a satellite's resources under the control of the satellite's network management system. This allows the resource allocation for the satellite and terrestrial components to be coordinated to optimize spectral efficiency and increase overall system capacity. In such a system, the satellite resources reused in the terrestrial component may bring about severe interference, which is one of the main factors affecting system capacity. Under this consideration, the objective of this paper is to achieve an optimized resource allocation in both components in such a way as to minimize any resulting inter-component interference. The objective of the proposed scheme is to mitigate this inter-component interference by optimizing the total transmission power - the result of which can lead to an increase in capacity. The simulation results in this paper illustrate that the proposed scheme affords a more energy-efficient system to be implemented, compared to a conventional power management scheme, by allocating the bandwidth uniformly regardless of the amount of interference or traffic demand.

• Journal of applied mathematics & informatics
• /
• 제22권1_2호
• /
• pp.339-350
• /
• 2006

The bifurcation point where a satellite component buds from another component is characterized by the existence of the common tangent line between the two osculating components appearing in the degree-n bifurcation set. We investigate the existence, location and number of bifurcation points for satellite components budding from the main component in the degree-n bifurcation set as well as a parametric boundary equation of the main component of the degree-n bifurcation set. Cusp points are also located on the boundary of the main component. Typical degree-n bifurcation sets and their components are illustrated with some computational results.

• ETRI Journal
• /
• 제24권6호
• /
• pp.415-428
• /
• 2002

This paper presents a new satellite radio interface, satellite code division multiple access (SAT-CDMA), for the satellite component of IMT-2000. The SAT-CDMA was proposed by Korea and was based on wideband CDMA (WCDMA) for a high degree of commonality with the terrestrial component of IMT-2000. Because a satellite link has a longer round trip delay and a higher Doppler shift than a terrestrial link, we developed new technologies that would make the satellite component especially efficient. We present the main features of the SAT-CDMA radio interface by focusing on satellite-specific schemes. We also demonstrate with extensive comparison results the performance of the main technologies in the SAT-CDMA radio interface.

• 한국위성정보통신학회논문지
• /
• 제2권1호
• /
• pp.27-34
• /
• 2007

ATC를 이용한 이동 위성 방송 서비스는 위성 통신의 고육 특징인 광역성에 따라 글로벌 커버리지에서 방송 서비스를 제공할 수 있을 뿐만 아니라 도심지에서도 끊김 없이 서비스를 제공할 수 있는 장점을 가진다. 본 논문에서는 이러한 ATC를 사용하는 이동 위성 통신 시스템에서 방송 서비스를 위해 ATC에 시공간 부호를 적용한 하향링크 전송 개념을 제안한다. 여기서 ATC는 기존의 시스템에서와 같은 단순히 중계기가 아니라 시공간 블록 부호를 적용하기 위한 하나의 안테나로 고려된다. 먼저 시공간 부호를 적용하기 위한 전송 시나리오를 제안하고 다음으로 고려하는 전송 시나리오에서 시공간 블록 부호를 ATC에 적용하여 기존의 하향링크 전송방법과 모의 실험을 통해 성능 비교를 한다. 모의 실험 결과 제안한 방법은 기존의 하향링크 전송 방법에 비해 다이버시티 이득으로 인한 성능 향상을 얻을 수 있었다.

• 한국위성정보통신학회논문지
• /
• 제9권1호
• /
• pp.65-69
• /
• 2014

통신해양기상위성 자료처리시스템(CMDPS)은 기상 관측과 기상 예측을 지원하기 위해서 국가기상위성센터에 의해서 개발되었고, 16종 기상자료(Level 2)를 생성하고 있다. 현재 CMDPS는 후속 기상위성자료처리를 위한 시스템 확장이나 통합 S/W에 대한 효율성, 유지관리 관점에서 다소 문제가 있다. 이러한 문제를 해결하기 위해서, 본 논문에서는 확장성을 갖는 통신해양기상위성 기상자료처리를 위한 컴포넌트 기반 시스템 아키텍처를 제안하였다. 제안된 시스템은 확장 가능한 아키텍처를 갖는 컴포넌트 기반의 프레임워크를 채택하고 있으며, 신규 위성자료처리 알고리즘 개발과 시스템 유지관리를 위해 손쉬운 방법을 제공할 것으로 기대된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.45-48
• /
• 2002

Satellite image processing software should be able to support interoperability that is to enable consumers, citizens, large and small businesses and governments to make the fullest possible use of the world's spatial data and spatial processing resources. The goal of interoperability is to perform hands-on research, development, testing, fielding, and validation of potential and existing interoperable geoprocessing technologies. In this paper, component based architecture for fast interoperability is designed to maximize interoperability among the OpenGIS components specified in the OpenGIS abstract specifications and implementation specifications and to mix up the OpenGIS components and the fast access mechanism for high performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.957-961
• /
• 2005

A satellite component must withstand vibration caused when launch vehicle acoustics and engine rumble transfer to it through its structural mount. Components shall be subjected to environmental tests after manufacturing process thus the environmental test conditions are needed for component level test including vibration and shock. This paper deals with derivation of component-level environmental test specifications, especially for solar panels of STSAT-2(Science & Technology SATellite-2). Sine sweep random vibration, and shock test conditions were generated for solar panels by assuming the satellite as single-degree-of-freedom system with a base excitation.

• 한국항공우주학회지
• /
• 제37권9호
• /
• pp.837-842
• /
• 2009

구성 모드(Component mode) 합성법을 이용하여, 태양전지판의 유연구조 진동특성을 고려한 위성의 축약된 동적 모델링 기법을 수립하였다. 유연구조 위성의 본체와 태양전지판을 서로 다른 두 개의 부구조물로 나누고, 각각의 국부좌표계에 대하여 유도된 부구조물 표현식들을 위성 전체의 기준좌표계에 대해서 합성하였다. 수립된 부구조물 합성법은 단일 태양전지판을 갖는 유연구조 위성의 수치적 예제에 적용되었으며, 태양전지판의 회전을 고려한 전달함수 결과의 고찰을 통하여 동적 모델링 기법의 타당성을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.49-52
• /
• 2002

High-resolution satellite image processing software should be able to ensure accurate, fast, compact data processing in offline or online environment. In this paper, component software for high-resolution satellite image processing is developed using OpenGIS components and real-time data processing architecture. The developed component software is composed of three major packages, which are data provide package, user interface package, and fast data processing package. The data provider package encodes and decodes diverse image/vector data formats and give identical data access methods to developers. The user interface package supports menus, toolbars, dialogs, and events to use easier. The fast data processing package follows the OpenGIS's data processing standards, which can deal with several processors as components with standard procedural functionalities.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권2호
• /
• pp.40-45
• /
• 2002

A radiation analysis is performed for the Ka and Ku-band transponder of the Communications and Broadcasting Satellite (CBS) that is planned for launch into the geo-synchronous orbit. A particular attention is given to calculation of Total Ionizing Dose (TID) for the mission life time of 15 + 3 years. A numerical modeling of the charged particles at the geo-synchronous orbit is undertaken. The charged particles from the modeling are then transported through the mechanical structure and component housings of the transponder. A set of locations are selected for the detailed calculation of TID. The results from the present calculation show that three-dimensional modeling of the component housings as well as the mechanical structure of the spacecraft is requisite in order to acquire a reliable calculation of TID.