• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.461-466
• /
• 2012

This paper describes the development and test result of X-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels. S-band frequency is used for Telemetry & Command, and X-band frequency is used for mission data. Payload observations data in Mass Memory Unit (MMU) is modulated by QPSK modulator in X-band Transmitter, and then QPSK modulation signal is transmitted to antenna through transfer switch. In this Paper, we described the results of modulation, low-pass filter design, power amp development, and switch test. The FM XTU is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.879-888
• /
• 1999

A Study on the ARQ scheme of data error control is important for more reliable information transmission. Since performance difference is large by the long transmission delay time in satellite communication, the performances of SR ARQ and conventional type-I hybrid ARQ with fixed code rate are investigated by using the parameters of packet length, channel capacity, BER, and transmission delay time especially. BCH code is used in type-I hybrid ARQ for FEC method. This paper presents the throughput analyses according to such various parameters as BCH code rate, window size, data rate and round-trip delay time. Especially we derive a performance equation of type-I hybrid ARQ with the factor of the transmission delay time using the equation of SAW ARQ. Also, the performance of type-I hybrid ARQ specially considering transmission delay time is analyzed through numerical analysis and computer simulation so we can get a important characteristics variation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.830-838
• /
• 2003

In this paper, TX/RX dual operation microstrip single antenna for satellite communication is designed, analyzed, fabricated and measured. TX/RX frequency ranges are 14.0∼l4.5 GHz, 11.7∼12.75 GHz in respectively and vertical and horizontal polarizations are used for TX and RX. This antenna uses microstrip direct feeding for RX and aperture coupled strip-line feeding for TX and accommodates stacked elements for a high directivity and wide impedance bandwidth. In an analysis of single element, FDTD and MOM was compared and FDTD analysis was more accurate because of the consideration of finite structure and imperfect two ground planes. The proposed structure facilitates generally to an extension of two dimensional array and lower an unwanted radiation by strip-line feed in TX. TX/RX 8${\times}$4 array has a return loss below -10 dB, -14 dB in TX, RX respectively and a gain ranging from 19.1∼20.7 dB in TX, 21.2∼21.8 dB in RX which has a radiation efficiency of 43∼5l %, 52∼57 %.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.739-746
• /
• 2017

Orthogonal frequency division multiplexing(OFDM) systems have many advantages. However, OFDM systems are much affected by a nonlinear distortion because those systems have a high peak to average power ratio(PAPR) value. A selected mapping technology was suggested to reduce a PAPR value. The technology does not have data loss but receivers need side information to know modified phase sequence. Therefore, side information causes decreased a transmission efficiency. In this paper, we suggest a blind SLM receiver using a cross correlation technology. This receiver does not require side information. The proposed blind SLM receiver calculates sums of cross-correlation between transmitted pilot signals multiplied by each phase sequence and received pilot signals. So, this receiver detects side information which has a maximum sum cross-correlation value. We compared our proposed SLM receiver to a conventional blind SLM receiver through bit error rate(BER) and side information error rate(SIER) performances. Simulation results show that the proposed SLM receiver has improved BER and SIER performances than the conventional SLM receiver.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.389-395
• /
• 2012

U-City has been promoted nation-wide by development of recent IT technology. This paper studied the concept of 3D-virtual city in order to realize the current Ubiquitous City(U-City) efficiently, and to manage all the RFID/USN monitoring data in the real U-City. 3D-Virtual City is the concept of the reproduction of real world U-City, for embodying Ubiquitous technology while using Digital map, satellite image, VRML(Virtual Reality Modeling Language). U&V-City is the four-dimensional future city that real-time wire/wireless communication network and 3D-web GIS shall be connected that massive database, intelligent service be perceived through employing EAI(External Authoring Interface) that provides HTML&JAVA, and interface for efficient removal/process of massive information/ service and also by employing GPS/LBS/Navigation in support of world-wide orientation concept, and RTLS(Real Time Location System).

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.315-330
• /
• 2017

Halo coronal mass ejections (CMEs) originating from solar activities give rise to geomagnetic storms when they reach the Earth. Variations in the geomagnetic field during a geomagnetic storm can damage satellites, communication systems, electrical power grids, and power systems, and induce currents. Therefore, automated techniques for detecting and analyzing halo CMEs have been eliciting increasing attention for the monitoring and prediction of the space weather environment. In this study, we developed an algorithm to sense and detect halo CMEs using large angle and spectrometric coronagraph (LASCO) C3 coronagraph images from the solar and heliospheric observatory (SOHO) satellite. In addition, we developed an image processing technique to derive the morphological and dynamical characteristics of halo CMEs, namely, the source location, width, actual CME speed, and arrival time at a 21.5 solar radius. The proposed halo CME automatic analysis model was validated using a model of the past three halo CME events. As a result, a solar event that occurred at 03:38 UT on Mar. 23, 2014 was predicted to arrive at Earth at 23:00 UT on Mar. 25, whereas the actual arrival time was at 04:30 UT on Mar. 26, which is a difference of 5 hr and 30 min. In addition, a solar event that occurred at 12:55 UT on Apr. 18, 2014 was estimated to arrive at Earth at 16:00 UT on Apr. 20, which is 4 hr ahead of the actual arrival time of 20:00 UT on the same day. However, the estimation error was reduced significantly compared to the ENLIL model. As a further study, the model will be applied to many more events for validation and testing, and after such tests are completed, on-line service will be provided at the Korean Space Weather Center to detect halo CMEs and derive the model parameters.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.155-161
• /
• 2007

This paper presents the design simulation, implementation, and measurement of a miniaturized PCS / Satellite DMB dual-band stacked mompole antenna with a parasitic patch for mobile communication terminals. A stacked helix is realized by using a via hole with height of 0.4 mm and a diameter of 0.35 mm to connect upper- and lower-layer helix sections for a reduction of the dimensions of the antenna. In addition the stacked helix chip antenna is interleaved with a parasitic patch to achieve two different radiation modes. The ratio of the first frequency and the second frequency vary with the geometrical parameter of the parasitic patch. The fabricated antenna uses FR-4 substrate with a relative permittivity of 4.2. Its dimensions are $15.5{\times}7.6{\times}0.4 mm^3$. The measured impedance bandwidths (VSWR<2) are 240 and 250 MHz at the operating frequencies, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1057-1063
• /
• 2007

To analyze the performance of mobile communication systems, the exact information of the carrier-to-interference ratio is important. Under the presence of an interferer in a cell, the carrier-to-interference ratio of the receiver is determined by the ratio between the informer-receiver distance$(d_0)$ and the receiver-interferer distance$(d_1)$. In this paper, we derive the carrier-to-interference distribution based on $d_0/d_1$ values using the geometric relation among the informer, interferer and receiver, and confirm its exactness using the simulation result. We also apply the derivation result to a system with the adjacent channel interference, and analyze the outage probability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.824-830
• /
• 2010

In order to prepare for increasing performance requirement for Differential Global Navigation Satellite System (DGNSS) services of International Maritime Organization (IMO) and International Association of Lighthouse Authorities (IALA), this paper focuses on design of network-based Automatic Identification System (AIS) reference station system that can perform the functionality of Differential Global Positioning System (DGPS) reference station in an AIS base station system. AIS base station receives the differential corrections from the DGPS reference station, and it is not a method for transmitting the received differential corrections to onboard AIS units, but it is a method for generating the optimized differential corrections for onboard AIS units in AIS coverage. Therefore this paper proposes an algorithm for generating the differential corrections at AIS reference station, and performs the performance assessment of the proposed algorithm based on DGPS correction data measured from a DGPS reference station. Finally this paper discusses the test results and efficiency of the proposed system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2818-2826
• /
• 2010

To study the spatial and temporal variations of sea surface temperature(SST) in the Northeast Asia sea during the period of 1985 to 2009. At first, the buoy data from Korea Meteorological Administration(KMA) and the satellite data have been matched up eight points. The root mean square error and the bias were increased towards the coastal shallow region. The study area which is divided 7 regions from Japan Meteorological Agency(JMA). We analyzed NOAA/AVHRR data by harmonic analysis which is comparison and analysis the center of the each regions. The mean SST varied between $8^{\circ}C$ to $26.0^{\circ}C$. The annual amplitude varied between $7^{\circ}C$ to $24^{\circ}C$. And the annual phase varied between end of July to end of August. Cross-correlation coefficients of mean SST, annual amplitude, and annual phase varied 0.57 to 0.85, -0.04 to 0.81 and 0.35 to 0.80 at all study area, respectively.