Most of the mulberry saplings in Korea have been produced by grafting. But the production of mulberry sapling by this method is very complex process and requires high level of technique and two years to produce saplings. Therefore, to develop the mulberry sapling production system by softwood cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to mulberry varieties, showing the highest rooting ratio of 93.3% in cultivar of Shingwangppong. Of different soil texture as for rooting media, the clay was found to be the best; other media decreased in order as follows; sand, sand loam and vermiculite. The shading ratio by 70% with polyethylene film showed the highest rooting ratio of the cuttings. Optimum day of cutting was around 50th day after sprouting, whereas the ratio of stem thicker than 7mm at the base of saplings in diameter was highest at 44th day.
접목법에 대체할 수 있는 새로운 상묘의 생산방법으로서 삽목재육묘의 육성법에 대하여 연구하였다. 1. 신소를 삽목하면 15 일후부터 발근하기 시작하여 거의 직선적으로 발근양이 증가하며 삽木 40일후에는 발근수 43본, 총근중 5.4g, 총근장 11.19mm에 달한다. 2. 신소삽목의 활착비율은 56~90%의 범위내에 있고 그 평균은 73% 정도이며 품종별로 보면 개량서반, 일지뢰가 80% 정도로 가장 좋고 시평이 가장 못하다. 3. 품종간에 있어서의 발근량은 개량서반, 일지뢰, 수원상4호, 노상은 거의 같은 정도로 많고 용천추우와 시평은 적다. 4. 발근촉진제는 NAA 0.01~0.02%에 2~3초 침지하며 그대로 삽목하는 것이 발근량도 못하지 않고 또 경제적이다. 5. 삽수의 채취량 증가와 경제적인 이용을 위해서는 1) 50cm 정도의 신소를 채취하여 2본씩의 삽수를 채취하고 중간부의 삽수의 기부는 반드시 절치하에서 절단하도록 할 것이며 2) 50cm 미만의 것도 전부 채취하여 이용한다. 가는 삽수나 생장정지아도 발근량은 약간못하나 상당히 발근하므로 이용가치가 있다. 3) 이렇게 하면 10a당 100,000본 이상의 삽수를 채취할 수 있다. 6. 삽수의 하단은 절치하에서 45$^{\circ}$로 사단한 다음 그 뒷면을 삭제하면 그 발근량을 증가시킬 수가 있다. 7. 재육묘를 육성하기 위한 삽목원묘는 10a당 100,000본을 삽목하여도 묘질은 약간 떨어지지만 실용적으로는 원묘로 이용하는데 별 지장이 없을 정도이다. 8. 삽목시기는 7월 중순까지는 그 시기가 늦어지는데 따라서 묘질은 약간 떨어지지만 충분히 이용가치가 있으므로 6월 상순부터 7월 중순까지사이에 수회에 걸쳐서 삽목할 수 있으며 6월하순이후에는 춘벌상수의 신소를 삽수로 이용한다. 9. 재육묘는 원묘의 중량이 10g 이상인 것은 그 성묘비율이 95% 이상이 되고 5~10g의 작은 원묘는 80% 이상의 성묘비율이 되며 그 묘질도 접목묘와 비슷하다. 10. 원묘를 식재할 때에는 그 묘조는 신조의 기부에 3~4아 남기고 절단하도록 한다. 11. 삽목재육묘의 생산비는 접목묘의 52%이다.
1. 원묘의 대소와 부위에 있어서 굵은 원묘가 가는 원묘에 비하여 활착 및 묘질이 좋았고 선단부와 기부사이에는 유의차는 없었으나, 선단부가 약간 활착과 묘질이 좋았다. 그리고 2아원묘와 3아원묘 사이에는 활착의 차가 없었다. 2. 원묘의 발근의 다소에 있어서는 발근량이 많은 것일수록 활착 및 묘질이 좋았다. 3. 원묘의 매복 심도에 있어서는 원묘의 선단에 파라핀을 도말하고 노출시킨 것이 가장 활착율이 높았으며 원묘의 선단에 파라핀을 도말하지 않더라도 그 선단을 노출시켜 매복하거나 또는 되도록 얕게 매복한 것이 깊게(6cm) 매복한 것보다 활착율이 높았다. 4. 원묘를 매복하는 방법에 있어서는 골의 중앙에 곧게 세운 것과 골의 한 쪽에 뉘어 세우고 매복한 것 사이에는 활착의 차는 없었으나 묘질은 곧게 세워 매복한 것이 비교적 양호하였다. 5. 육성포의 토성에 있어서는 사양토와 식양토간에 원묘의 활착의 차는 없었으나 묘질은 사양토에서 좋았다. 6. 각품종간(시평, 개량서반, 노상, 수원상4호 및 용천추우)에 있어서는 원묘의 활착에는 차가 없었으나 묘질은 용천추우가 가장 좋았다. 7. 생산비를 조사한 바 상묘 1본당 재육채묘는 1원 61전이었는데 비하여 접목은 2원 3전이었다.
Robinia pseudoacacia is one of most widely cultivated exotic species in Bulgaria. The total area of black locust plantations amounts to 2.9% of the total forest area of the country. 15.34% of the plantations are of management afforestations category, where the priority is given to timber production. They have been created on rich and moisture soils, which are the most appropriate for the species in order to achieve its biological potentials of high productivity. The rest of the available plantations in the country are planted on poorer and drier soils up to 600~800 m altitude. The high adaptive ability of the species to unsuitable environmental conditions as well as the high sprout potential was used for their creation. These stands are mainly done with the aim to protect and ameliorate damaged environments and production of small-size timber and fire woods. They are cultivated until 15-20 years and are revived by sprouts. Therefore the management goals searched, 45.69% of those forests are low productive and 38.97% with average productiveness. The present report deals with growth and productivity capacity of black locust plantations; production of sowing materials; production of reproductive and vegetative saplings for afforestation; the technological aspects of afforestation works; the management and use of black locust plantations as well as some more important diseases and pests affecting the species. The report is entirely based on Bulgarian scientific research works and experience with the Robinia preudoacacia. Recommendations for optimizing the use of species are given.
Jin, Guangze;Tian, Yueying;Zhao, Fengxia;Kim, Ji Hong
한국산림과학회지
/
제96권2호
/
pp.227-234
/
2007
The forest canopy gap has been well known as a substantial process of forest cyclic regeneration and important role in stand structure, dynamics, and biodiversity of the forest ecosystem. Based on 3,600 $5m{\times}5m$ square grids in a 9ha permanent experimental plot, the study was conducted to evaluate the regeneration pattern of woody species by developmental stage {seedlings (<1 m of height), saplingI (>1 m of height, <2 cm of DBH), and saplingII (2 cm$<200m^2$), $201-400m^2$, $400-600m^2$, $601-800m^2$, and $>800m^2$) in the mixed broadleaved-Korean pine forest. The results indicated that the regenerating trees of Populus ussuriensis occurred only in the canopy gap area, considered to be a typical gap-dependent species. The regeneration of Ulmus japonica, Ulmus laciniata, and Maackia amurensis could be generally satisfied with the gap size of $201-600m^2$, Betula costata and Prunus padus with gap size of $401-800m^2$, Picea koraiensis with gap size of $201-800m^2$, Fraxinus mandshurica and Syringa reticulata var. mandshurica with smaller than $800m^2$, respectively. Acer ukurunduense and Acer tegmentosum were likely to have no problem with the gap size to make gap regeneration. Acer mono and Tilia amurensis looked more capable of regenerating in the closed canopy disregarding the upper crown condition. The regeneration of Pinus koraiensis and Abies nephrolepis had no trouble under the canopy condition in less than $800m^2$of gap size. The density of regenerating shrubs was rather high, especially under the closed canopy, considered to be associated with great amount of regeneration production in such shade tolerant species as Lonicera maackii, Corylus mandshurica, Euonymus pauciflorus, and Philadelphus schrenkii under the closed canopy. Pearson correlation coefficient was computed to compare the similarity among non-gap area and five gap size classes by developmental stages for trees and shrubs. The similarity coefficients among closed canopy and the gap size classes were mostly significantly correlated to each other with a few exceptions.
To investigate the impact of the number of runners developed from daughter plants during seedling on sapling growth and development during phase of first cluster, we examined four treatment groups that had 3-4, 5-6, 7-8, and 9-10 runners. As of June $5^{th}$, the group with 9-10 runners showed the highest number of saplings with more than 2 leaves, followed by groups with 7-8, 5-6, and 3-4 runners. Although observation on June $25^{th}$ and July $15^{th}$ showed a similar tendency for sapling numbers, no significant difference was detected between groups with 7-8 and 9-10 runners. The length of runners in the treated groups was similar to that in groups with 3-4 and 5-6 runners, with lengths of 49.4 mm and 48.0 mm, respectively, but runner length was significantly shorter in the group with 7-8 runners. Both the thickness and the weight of runners were highest in the group with 3-4 runners. The growth and development of daughter plants and root weight were similar between the groups with 3-4 and 5-6 runners, whereas both values were lower in groups with 7-8 and 9-10 runners. While stem crown thickness values were 8-7 mm and 8.5 mm in groups with 3-4 and 5-6 runners, respectively, groups with 7-8 and 9-10 runners had thinner stems of 7.1 mm and 6.2 mm, respectively. The fresh weight of saplings decreased as the number of runners increased. From the phase first cluster, leaf area and fresh weight were remarkably low in groups with 7-8 and 9-10 runners. Taken together, these results can be used to increase the production of high-quality saplings by providing a foundation for studies to investigate the impact of the number of runners developed from daughter plants on growth and development during the seedling period and the phase first cluster.
This study was designed to provide basic data applicable to fire investigation through consideration of combustion products and propose vulnerability of combustibles through analysis of $CO_2$ emission. In order to achieve these research objectives, characteristics of combustion products such as smoke release rate of each part(raw leaves, branches and barks), $CO_2$ emission and ash production were considered targeting on 6 oak species(Quercus variabilis Blume, Quercus aliena Blume, Quercus serrata, Quercus mongolica Fisch, Quercus dentata Sapling and Quercus acutissima) using cone calorimeter and smoke density tester. As a result, it was found that raw leaves release smoke more relatively than branches and barks, when they burn, and that Quercus variabilis Blume has the highest smoke density. Also, Quercus acutissima released CO and $CO_2$ which are respectively, 6.67 times and 1.43 times more than Quercus variabilis Blume with low $CO_2$ emission. In addition, branches released CO and $CO_2$ more relatively. There was a big difference in ash production among raw leaves(3.1 g), branches(10.5 g) and barks(16.43 g). It was identified that Quercus serrata produces ashes which are nearly 9.95 times more than Quercus variabilis Blume. It demonstrates that Quercus serrata contains relatively higher minerals and that Quercus variabilis Blume can leave lots of traces like stain and carbonization, as it releases smoke a lot and it's difficult to predict visibility, when a forest fire breaks out in its community area. It is also considered that smoke particles containing oil in the air leave strain on the surface of a tree, and that CO and $CO_2$ emission increases, when crown fire to burn branches breaks out.
Recognizing the importance of the multi-purpose management of natural deciduous forest, this study was carried out to implement the partial cutting for stand regulation to examine agroforestry practice as well as other concurrent forest resource production, and to investigate the changes in stand characteristics and understory vegetation in a silvopasture practiced natural deciduous stand in the Research Forest of Kangwon National University, Korea. Three different partial cutting intensities (68.1%, 48.6%, and control) were performed in the unmanaged natural deciduous stand in order to improve the growing condition, especially light condition, for introducing some commercial herbaceous plants on the forest floor to establish agroforestry and/or silvopastoral system. Dominated by Quercus varibilis Blume (50.5%) and Quercus dentata Thum. ex Murray (42.6%), eight tree species were composed of the study forest, including poles of Pinus desiflora Siebold & Zucc and sapling of Pinus Koraiensis Siebold & Zucc. The total of 87 (13 tree species, 12 shrub species, 58 herbaceous species, and 4 woody climbers) vascular plant species were observed in study site after partial cutting treatments, while that of before partial cutting was 53 species (14 tree species, 8 shrubs species, 30 herbaceous species, and 1 woody climbers). The proportion of life form spectra in plot B was Mi (28.4%)-Na (23.0%)-Ge (17.5%)-Ch (10.8%)-He (9.5%)-MM (6.7%)-Th (4.1%). No statistically significant differences were observed in changes of life form spectra from before to after partial cutting treatment and among partial cutting gradients in this study. Partial cutting and scratching for forage sowing made plants invade easily on the forest floor, and light partial cutting (LPC) plot (500 stems/ha) had much higher number of undersory species than those of heavy partial cutting (HPC) plot (310 stems/ha) and control plot (1,270 stems/ha).
미국선녀벌레 생물적 방제를 위한 기생성 천적인 선녀벌레집게벌 대량사육 체계를 구축하였다. 선녀벌레집게벌 고치 생산은 기주인 미국선녀벌레 약충밀도와 기주식물의 재식밀도에 따른 차이를 보였지만, 뽕나무 기주식물 잎당 평균 5~8개, 주당 평균 70~150개가 생산되었다. 선녀벌레집게벌 암컷 평균 고치 길이는 6.01~6.46 mm, 수컷은 4.20~4.62 mm로 암수 간 통계적으로 유의미한 차이를 보였으며, 우화 전 고치상태에서의 암수 구분으로 선녀벌레집게벌을 효과적으로 방사할 수 있을 것으로 보인다. 반야외조건에서 선녀벌레집게벌 기생률은 평균 13~17%로, 방사 마리수에 따른 기생률 차이는 확인되지 않았으나 방사 마리수가 많을수록 미국선녀벌레 개체군밀도증가율이 낮아지는 경향을 보였다. 선녀벌레집게벌의 성비나 이화성은 기주의 영기에 따라 달라졌다. 기주의 영기가 낮을수록 이화성 비율이 증가했고, 4~5령 약충에 기생시 암컷의 비율이 높게 나타나 대량사육 시 개체조절이 가능할 것으로 판단된다.
3-HV 몰분율이 증대된 P(3HB-3HV)의 고농도 생산을 위하여 재조합 phbC유전자를 모균주에 재도입시킨 형질전환 Alcaligenes eutrophus AER5의 배양공학적 연구를 수행하였다. 상기 형질전환균주를 전구물질인 valerate가 10.0g/L첨가된 최소배지에서 2단계 배양한 결과 P(3HB-3HV)내의 3-HV 몰분율이 52.2 mol%로 모균주 A. eutrophus H16의 30 mol%에 비해 현저히 증가하였다. 이와 같은 몰분율의 증가는 phbC 유전자의 산물인 PHB synthase의 증폭과 밀접한 관련이 있음을 확인하였다. 2단계 회분배양시 fructose의 보충첨가의 영향을 검토하였으며, 적정농도인 10.0g/L의 fructose를 valerate와 같이 첨가할 경우 총균체량, p(3HB-3HV)의 축적농도, 그리고 축적율은 현저히 증가한 반면, 3-HV 몰분율은 다소 감소하는 경향을 보였다. $Mg^{2+}$ 이온은 P(3HB-3HV) 축적 에 매우 민감한 영향을 미쳤으며, 적정 농도로 판단되는 0.1 g/L일 경우 P(3HB- 3HV) 축적농도는 6.1 g/L, 그리고 3-HV 몰분율은 71.3 %로 현저히 증가하였다. 또한 적정 pH 조절제의 선정을 위하여 NaOH, NaOH와 (NH$_4$)$_2$SO$_4$의 혼합액, 그리고 NH$_4$OH을 비교 검토하였다. 2단계 배양법의 번거로움을 극복하고저 1단계 간헐적 유가식배양법을 검토한 결과, 배양 72시간 후 총균체량 19.2g/L, P(3HB-3HV) 축적농도 10.4 g/L, 그리고 3-HV 몰분율 35 mol%로 2단계 회분 배양법보다 우수한 결과를 얻었다. 이는 형질전환균주를 이용한 3-HV 몰분율이 높은 P(3HB-3HV)의 고농도 생산을 위한 배양조건 확립을 위한 기초자료로 활용될 것이다.90배의 살충력을 보였다. SDS-PAGE와 Western blot 분석에서도 클론 pHLN2-72는 재조합 클론 pHLN2-80(-)보다 약간 높게 ICP가 생성이 되었었다. 이상의 결과는 과다발현에 Plac프로모터와 종결부위가 반드시 필요하며, -72 bp ICP 프로모터가 -80 bp 프로모터보다 과다발현률이 높았으며, ICP 유전자는 반드시 Plac프로모터의 전사 방향에 역방향으로 삽입이 되어야 하는 것으로 나타났다.사용함으로써 고품질의 전통주류 생산이 가능하다고 사료된다.noicacid, methylmalonic acid, 2-methyl-4-keto-pentan-2-ol 등과 지방산의 일종인 tetradecanoic acid, hexadecane, hept-adecanoic acid, octadecanoic acid 등이 확인되었다.er 7.6mm. Further rich management measure and investigation were recommended such as sapling protection, signboard construction, soil erosion controlling and regular monitoring within the community.ldom changed at level 1.will cause students to form the mathematical concepts correctly. 3. By visualizing the process of drawing the quadratic function graph, students understand the quadratic function graph structually. 4. Through the feedback, the recognition ability of the trigonometric function can be improved. 5. It is possible to change
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.