• Journal of Plant Biology
• /
• v.14 no.3
• /
• pp.21-28
• /
• 1971

Dry matter production, leaf area growth and total nitrogen changes were studied in Glycine max. soybean communities, which were grown in sandy loam soils controlled to provide various moisture levels, i.e., 5-7%(level 1), 8-10%(level 2), 11-13%(level 3), 14-15%(lev디 4), 17-20%(level 5) and 22-24%(level 6). A summary of the results is shown. The maximum dry matter production of leaves, stems and nodules and the maximum leaf area per unit area were at level 5, but the maximum of root dry matter production was at level 4. Total nitrogen content of the soybean plant decreased with growth, but each level of soil moisture content also showed a little difference. Water content of the plant decreased with plant age and soil water deficiency, especially in roots and nodules. Nodule formation increased in proportion to soil moisture content. total nitrogen content of the soil on which the soybeans grew, increased from 0.23% before sowing to 0.30% at 100 days after sowing. It seems that soil water content acts as a linear factor in the elongation or dry weight increase of shoots and roots until increasing to level 5. Considering the pattern of plant growth through analysis of the shoot and root dry weight ratio, or the photosynthetic organ and non-photosynthetic organ dry weight ratio, the asymptote of plant growth at a high soil water content exceeded that at a low soil water content.

• Journal of Forest and Environmental Science
• /
• v.36 no.4
• /
• pp.259-266
• /
• 2020

Poplar trees from the Salicaceae family over the years have been utilized for various reasons which include prevention of deforestation as well as phytoremediation. This study aims to determine the optimal pre-treatment and soil conditions required for propagation of poplar cuttings for increased initial adaptability and survival rate. Five poplar clones (Hanan, 110, 107, DN-34, 52-225) were selected for IBA, soil composition treatments on propagation. IBA pre-treatment of cuttings were utilized 0, 10, and 100 mg l-1 concentrations. Soil compositions were amended with TKS-2+perlite 2:1 (v:v) and sandy clay loam mixed with artificial soil. According to the greenhouse results 10 mg l-1 of IBA showed a significant increase in plant height whereas 100 mg l-1 inhibited plant growth except in clone 110. Soil composition severely affected root growth and hence overall growth of the clones. Sandy clay loam soil had poor to stunted growth compared to TKS-2+perlite.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.3
• /
• pp.231-238
• /
• 2021

BACKGROUND: Metal contamination of farmlands nearby abandoned mines is a serious environmental problem. This study was conducted to evaluate the efficiency of stabilizers on different type of the soils contaminated with metals. METHODS AND RESULTS: The texture of silt loam soil initially contaminated with heavy metal was artificially adjusted to loam and sandy loam by adding sand, and the soil organic matter content (1.5%) was also altered by adding peat to the soils at 3.5 and 8.0%. The soils were mixed with 3% (w/w) of each limestone, dolomite, and steel slag. For the soils with different textures, the bioavailability of As was found to be the lowest in sandy loam compared to others metals such as Cu, Pb, and Zn. The efficacy of limestone and dolomite was not significantly different compared to the soils having different organic matter contents, but the stabilization efficiency of steel slag increased as the soil organic matter content increased. Moreover, stabilizers showed inhibition effect on the uptake of metals to plant. CONCLUSION: The stabilizers were found as effective materials to immobilize metals in soil and to decrease plant uptake of metals. Studies are needed to deeply elucidate the interaction between influencing factors and various stabilizers.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.1
• /
• pp.4575-4591
• /
• 1978

In order to investigate the effects of grain size distribution, cement content, and molding pressure on the strength and durability of soil-cement mixtures, a laboratory test of soil cement mixtures was performed at four levels of cement content, five levels of molding pressure, and four levels of normal curing periods. The results are summarized as follows: 1. Optimum moisture contents in loam soil and maximum dry density in sand soil increased with the increase of cement content, but in others, both optimum moisture contents and maximum dry density were changed ununiformly. 2. When the specimens were molded with molding pressure, 50kg/$\textrm{cm}^2$, strength of soil cement mixture with cement content, 2 and 4 per cent, was lower than the strength of soil cement mixture without cement content by more than 40 to 50 per cent. 3. The strength of soil-cement molded with molding pressure, 100kg/$\textrm{cm}^2$, was higher than the strength of soil-cement molded with M.D.D. obtained from standard compaction test more than 40 per cent in sand loam cement and 50 per cent in loamy cement. 4. There was highly significant positive correlation among molding pressure, cement content and unconfined compressive strentgh and so the following multiple regression equations were obtained. Loam: fc=1.9693C+0.197P-0.84 Sandy loam: fc=2.9065C+0.235P-0.77 5. When the specimens were molded with molding pressure, 20 to 100kg/$\textrm{cm}^2$, the regression equation between the 28-day and 7-day strenght was obtained as follows. Loam : q28=1.1050q7+7.59(r=0.9147) Sandy loam : q28=1.3905q7+3.17 (r=0.9801) 6. At the cement contents of above 50 per cent, the weight losses by freeeze-thaw test were negligible. At the cement content of below 8 per cent the weight losses were singnificantly high under low molding pressure and remarkably decreased with the increase of molding pressure up to 80kg/$\textrm{cm}^2$. 7. Resistance to damage from water and to absorption of water were not improved by molding pressure alone, but when the soil was mixtured with cement above 6 per cent, damage seldoms occurred and absorbed less than 5 per cent of water. 8. There was highly significant inverse-corelationship between the compressive strength of soil cement mixtures and their freeze-thaw loss as well as water absorption. By the regression equation methods, the relationships between them were expessed as followed fc=-7.3206Wa+115.6(r=0.9871) log fc=-0.0174L+1.59(r=0.7709) where fc=unconfined compressive stregth after 28-days curing. kg/$\textrm{cm}^2$ Wa=water absorption, % L : freeze-thaw loss rate, %

• Applied Biological Chemistry
• /
• v.28 no.3
• /
• pp.124-130
• /
• 1985

Adsorption experiments of N-methylcarbamate insecticides on soils were carried out as a function of soil pH ana soil organic matter content with wet-and dry-land soils that were either oxidized or non-oxidized. The results obtained may be summarized as follows: The adsorption of N-methylcarbamate insecticides on soils was nearly leached to equilibrium after shaking for 12 hours. The adsorption of N-methylcarbamate insecticides was higher on sandy clay than sandy loam. The presence of organic matter in soil increased the adsorption of N-methrlcarbamate insecticides on soils. The mode of isothermal adsorption of N-methylcarbamate insecticides on soils was coincident with the Freundlich equation. Little effect of soil pH on the adsorption might be interpreted as that the adsorption was due to physical adsorption between N-methylcarbamate molecules and soil surface.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.203-215
• /
• 2011

Geochemical and mineralogical properties of a contamited soil should be taken into account to decide a remediation strategy for a given contaminant because development and optimization of soil remedial technologies are based on geochemical and mineralogical separation techniques. The objective of this study was to investigate the geochemical and mineralogical characteristics of arsenic-contaminated soils. The arsenic-contaminated soil samples were obtained from Chonam gold mine, Gwangyang, Chonnam, Particle size analysis, sequential extraction, and mineralogical analyses were used to characterize geochemical and mineralogical characteristics of the As-contaminated soils. Particle size analyses of the As-contaminated soils showed the soils contained 17-36% sand, 25-54% silt, 9-28% clay and the soil texture were sandy loam, loam, and silt loam. The soil pH ranged from 4.5 to 6.6. The amount of arsenic concentrations from the sequential soil leaching is mainly associated with iron oxides (1 to 75%) and residuals (12 to 91%). Major minerals of sand and silt fractions in the soils were feldspar, kaolinite, mica, and quartz and minor mineral of which is an iron oxide. Major minerals of clay fraction were composed of illite, kaolinite, quartz, and vermiculite. And minor minerals are iron oxide and rutile. The geochemical and mineralogical analyses indicated the arsenic is adsorbed or coprecipitated with iron oxides or phyllosilicate minerals. The results may provide understanding of geochemical and mineralogical characteristics for the site remediation of arsenic-contaminated soils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.548-554
• /
• 2016

Optimal range of soil physical quality to enhance crop productivity or to improve environmental health is still in dispute for the upland soil. We hypothesized that the optimal range might be established by comparing soil physical parameters and their interactions inhibiting crop growth. The parameter identifying optimal range covered favorable conditions of aeration, permeability and root extension. To establish soil physical standard two experiments were conducted as follows; 1) investigating interactions of bulk density and aeration porosity in the laboratory test and 2) determining effects of soil compaction and deep & conventional tillage on physical properties and crop growth in the field test. The crops were Perilla frutescens, Zea mays L., Solanum tuberosum L. and Secale cereael. The saturated hydraulic conductivity, bulk density from the root depth, root growth and stem length were obtained. Higher bulk density showed lower aeration porosity and hydraulic conductivity, and finer texture had lower threshold bulk density at 10% aeration bulk density. Reduced crop growth by subsoil compaction was higher in silt clay loam compared to other textures. Loam soil had better physical improvement in deep rotary tillage plot. Combined with results of the present studies, the soil physical quality was possibly assessed by bulk density index. Threshold subsoil bulk density as the upper value were $1.55Mg\;m^{-3}$ in sandy loam, $1.50Mg\;m^{-3}$ in loam and $1.45Mg\;m^{-3}$ in silty clay loam for optimal soil physical quality in upland.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.4
• /
• pp.300-308
• /
• 2000

The degradation of herbicide $^{14}C-bifenox$ was studied in soils under anaerobic conditions. $^{14}C-bifenox$ was treated in silty loam and sandy loam soils, respectively at a rate of 2.1 mg/kg, and the soil was incubated under anaerobic conditions at $25^{\circ}C$ for 180 days. The mineralization, solvent extractable and non-extractable residues, degradation products of bifenox were investigated during the experiments. The relative amounts of $^{14}CO_2$ were 1.97 and 0.9% of applied $^{14}C$ in silty loam and sandy loam soils, respectively. The non-extractable residues of sandy loam soil increased dramatically up to 79.12% of applied $^{14}C$, and were higher than those of silt loam soil, suggesting physico-chemical properties and especially organic matter contributed to the difference of $^{14}C$ between two soils. The non-extractable residues were formed mainly humin fraction and increased with time. The major metabolites were nitrofen, 5-(2,4-dichlorophenoxy)-2-Nitrobenzoate, 2,4-dichlorophenoxy aniline and methyl 5-(2,4-dichlorophenoxy) anthranilate by GC/MS analysis. From the results of volatilization, mineralization and degradation of bifenox, bifenox was stable chemically and biologically in soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.6
• /
• pp.499-505
• /
• 1992

This experiment was carried out to find out the optimum application method of slow-release fertilizer under different soil textures, clay loam(Deogpyeong series), sandy loam (Gangseo series) in the southern region(Milyang, Kyeongnam) of Korea. The fertilizers used were Chosun slow-release fertilizer(silicate latex coated fertilizer: N-P$_2$O$_{5}$-K$_2$O=18-12-13) and Meister 15 (thermoplastic resin coated fertilizer : N-P$_2$O$_{5}$-K$_2$O=14-14-14). The two whole basal application methods such as side band placement at transplanting time of rice plant(cv.Donghaebyeo) and incorporation with soil as basal were tested. The released amount of ammonium nitrogen from the soils for 4 days submerged was 95ppm in sandy loam and 60ppm in clay loam. The greenish degree of rice leaf was higher at the whole plow layer placement method than the others. The nitrogen efficiencies of the fertilizers were Meister 15 > convention > Chosun in order and between the application methods were similiar. The growth status was better at the whole plow layer placement application method of Meister 15 regardless of soils and seedling ages. The ripening ratio was increased at slow-release fertilizer application, and between application methods, whole plow layer placement was lower because of lodging damage. The yield in clay loam soil showed a significant difference between the ferilizers, but there were slight differences between the application methods and fertilizers in sandy loam soil. As a result, the slow-release fertilizer, Meister 15, applied at the whole layer showed a good rice growth and seemed a plausible fertilizing method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.731-737
• /
• 1995

This experiment was carried out at National Crop Experiment Station in 1994 to obtain basic information of growth characters and yield of rice under various nitrogen split application methods on different soil textures in direct seeding on dry paddy. Hwaseongbyeo sown on April 27 by flat drill seeding, and irrigation was done at 3 leaf stage after seedling establishment. Number of seedling stand was 159~177 seedlings per $m^2$ regardless of soil texture and nitrogen application method. Number of panicle per unit area in loam was higher than in sandy loam, and it also was higher in top dressing plots, which were 3 times application at rate of 40-30-30% (3rd leaf stage -7th leaf stage -panicle initiation stage) and 4 times application 10-30-30-30%(basal-3rd leaf stage -7th leaf stage -panicle initiation stage), than in conventional method. Leaf colour, leaf area index and dry matter production at heading stage were highest at top dressing plots among the nitrogen application methods in both sandy loam and loam. Lodging index in top dressing plots increased by low breaking weight with long culm. There were field lodging of degree 3 in top dressing plots. Rice yield in sandy loam, loam increased by 7~9%, 6~9% in top dressing of nitrogen, respectively.