• 제목/요약/키워드: sand soil

Search Result 1,957, Processing Time 0.037 seconds

Drainage Performance of Various Subsurface Drain Materials- (배수개선공법개발에 관한 연구(I) -각종 지하배수용 암거재료의 배수성능-)

  • 김철회;이근후;유시조;서원명
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.21 no.3
    • /
    • pp.104-120
    • /
    • 1979
  • I. Title of the Study Studies on the Development of Improved Subsurface Drainage Methods. -Drainage Performance of Various Subsurface Drain Materials- II. Object of the Study Studies were carried out to select the drain material having the highest performance of drainage; And to develop the water budget model which is necessary for the planning of the drainage project and the establishment of water management standards in the water-logged paddy field. III. Content and Scope of the Study 1. The experiment was carried out in the laboratory by using a sand tank model. The drainage performance of various drain materials was compared evaluated. 2. A water budget model was established. Various parameters necessary for the model were investigated by analyzing existing data and measured data from the experimental field. The adaptability of the model was evaluated by comparing the estimated values to the field data. IV. Results and Recommendations 1. A corrugated tube enveloped with gravel or mat showed the highest drainage performance among the eight materials submmitted for the experiment. 2. The drainage performance of the long cement tile(50 cm long) was higher than that of the short cement tile(25 cm long). 3. Rice bran was superior to gravel in its' drain performance. 4. No difference was shown between a grave envelope and a P.V.C. wool mat in their performance of drainage. Continues investigation is needed to clarify the envelope performance. 5. All the results described above were obtained from the laboratory tests. A field test is recommended to confirm the results obtained. 6. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as follows; $$D=\Sigma\limit_{t=1}^{n}(Et-R_{\ell}-I+W_d)..........(17)$$ 7. Among the various empirical formulae for potential evapotranspiration, Penman's formular was best fit to the data observed with the evaporation pans in Jinju area. High degree of positive correlation between Penman;s predicted data and observed data was confirmed. The regression equation was Y=1.4X-22.86, where Y represents evaporation rate from small pan, in mm/100 days, and X represents potential evapotranspiration rate estimated by Penman's formular. The coefficient of correlation was r=0.94.** 8. To estimate evapotranspiration in the field, the consumptive use coefficient, Kc, was introduced. Kc was defined by the function of the characteristics of the crop soil as follows; $Kc=Kco{\cdot}Ka+Ks..........(20)$ where, Kco, Ka ans Ks represents the crop coefficient, the soil moisture coefficient, and the correction coefficient, respectively. The value of Kco and Ka was obtained from the Fig.16 and the Fig.17, respectively. And, if $Kco{\cdot}Ka{\geq}1.0,$ then Ks=0, otherwise, Ks value was estimated by using the relation; $Ks=1-Kco{\cdot}Ka$. 9. Into type formular, $r_t=\frac{R_{24}}{24}(\frac{b}{\sqrt{t}+a})$, was the best fit one to estimate the probable rainfall intensity when daily rainfall and rainfall durations are given as input data, The coefficient a and b are shown on the Table 16. 10. Japanese type formular, $I_t=\frac{b}{\sqrt{t}+a}$, was the best fit one to estimate the probable rainfall intensity when the rainfall duration only was given. The coefficient a and b are shown on the Table 17. 11. Effective rainfall, Re, was estimated by using following relationships; Re=D, if $R-D\geq}0$, otherwise, Re=R. 12. The difference of rainfall amount from soil moisture depletion was considered as the amount of drainage required. In this case, when Wd=O, Equation 24 was used, otherwise two to three days of lag time was considered and correction was made by use of storage coefficient. 13. To evaluate the model, measured data and estimated data was compared, and relative error was computed. 5.5 percent The relative error was 5.5 percent. 14. By considering the water budget in Jinju area, it was shown that the evaporation amount was greater than the rainfall during period of October to March in next year. This was the behind reasonning that the improvement of surface drainage system is needed in Jinju area.

  • PDF

Investigation of Soil Contamination of Some Major Roadsides in Seoul -II. Major Roadsides in Gangdong-, Gwangjin-, Nowon-, Seodaemun- and Seongdong-gu- (서울시 주요 도로변 토양오염 조사 -II.강동구, 광진구, 노원구, 서대문구, 성동구 내 주요 도로변 토양-)

  • Kim, Kwon-Rae;Lee, Hyun-Haeng;Jung, Chang-Wook;Kang, Ji-Young;Park, Soon-Nam;Kim, Kye-Hoon
    • Applied Biological Chemistry
    • /
    • v.45 no.2
    • /
    • pp.92-96
    • /
    • 2002
  • Present contamination levels of soils along the major roadsides of Seoul, Korea were investigated, and base-line data were accumulated for future use. Topsoil $(1{\sim}5$ cm) and subsoil $(20{\sim}50$ cm) from five districts (Gangdong-, Gwangjin-, Nowon-, Seodaemun- and Seongdong-gu) were sampled. The collected samples were airdried, passed through 2-mm sieves, and analyzed to determine the physicochemical properties including pH, EC, CEC, exchangeable cations (Ca, Mg, K, and Na), and heavy metal contents (Cd, Cu, Pb, and Zn). Soil textures of topsoils and subsoils were mainly loamy sand and sandy loam, respectively. The range of pH was $4.5{\sim}10$.0 with an average of 7.5 for both topsoil and subsoil, which is much higher than that of the forest soils in Seoul. The ranges of 0.1 N HCI extractable Cd, Cu, Pb, and Zn contents for both topsoils and subsoils were $0.0l{\sim}l.19$, N.D. (not $detected){\sim}228$.99, $N.D.{\sim}352$.54, and $2.97{\sim}332$.96 mg $kg^{-1}$, respectively. Most of the average heavy metal contents were lower than the concern level of the Soil Environment Conservation Act of Korea, but were much higher than those of the , forest soils in Seoul. Some sites were higher in heavy metal contents than the concern levels; in particular, the average Cu content in Seongdong-gu was much higher than the concern level, 50 mg $kg^{-1}$. Careful management of the soil to prevent the aggravation of the present contamination level and the dissemination of contamination is highly recommended.

A Basic Study on the Euryale ferox Salisbury for Introduction in Garden Pond(II) - Focusing with Soil and Water Conditions - (정원 연못내 가시연꽃(Euryale ferox Salisbury) 도입을 위한 기초연구 II - 토양과 수환경을 중심으로 -)

  • Lee, Suk-Woo;Rho, Jae-Hyun;Park, Jae-Cheol;Kim, Hwa-Ok
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.34 no.3
    • /
    • pp.28-37
    • /
    • 2016
  • Through the research and analysis on the hydrological environment and soil environment of habitats through documentary and field studies over 14 habitats of Euryale ferox Salisb. within Jeollabukdo, with the objective of acquiring the basic data for forming an environment based on plantation of reservoirs that are composed with Euryale ferox, the following results were obtained. As a result of analyzing the construction period of the habitats of Euryale ferox from a total of 14 places, the average period of duration after construction of all subject reservoirs appeared to be 71.8 years. Moreover, when examining the relationship between the age of reservoirs and eutrophication, it could be judged that at least the eutrophication of subsoil and water environment is not an obstacle to the growth of Euryale ferox grows in habitats that have a reservoir age of approximately 70 years or more. As a result of analyzing the gardening of soil sediment of the Euryale ferox habitats, the component ingredients appeared to be composed of 80.2% of clay, 16.7% of silt and 3.1% of sand, and the soil class pursuant to such was classified as 'heavy clay'. The organic matter contents of soil sediment appeared to be an average of 36g/kg, and there appeared to be no noticeable difference between the habitats and non-habitats of Euryale ferox. The water quality environment of Euryale ferox habitat appeared to be pH 6.5~7.9, concentration of dissolved oxygen to be $1.8{\sim}8.8mg/{\ell}$, concentration of COD to be $6.8{\sim}74mg/{\ell}$, floating materials to be $2.0{\sim}213mg/{\ell}$, total nitrogen to be $0.422{\sim}10.723mg/{\ell}$, and phosphate to be $0.003{\sim}0.126mg/{\ell}$. The average DO concentration of Aedang Reservoir at Jeongeup, Daejeong Reservoir at Imsil, and Myeongdeokji at Gimje with high vitality and green coverage ratio of Euryale ferox appeared to be $3.5mg/{\ell}$, total nitrogen to be $1.33mg/{\ell}$, and concentration of phosphorus-phosphate to be $0.061mg/{\ell}$. When comparing such with the entire average value, the DO and total nitrogen concentration appeared to be rather low, and the phosphorus-phosphate concentration appeared to be higher by two times or more, thus, an in-depth study on the correlation of the vitality of Euryale ferox Salisb. and concentration of phosphorate-phosphorus will be needed in the future.

Location Environment and Vegetation Structure of the Aconitum austrokoreense Habitat (세뿔투구꽃 서식지의 입지환경 및 식생구조)

  • Cho, Seon-Hee;Lee, Kye-Han
    • Journal of Korean Society of Forest Science
    • /
    • v.110 no.2
    • /
    • pp.165-178
    • /
    • 2021
  • Owing to the lack of consistent research on endangered plant species in Korea, there are insufficient data to preservespecies and expand habitats. This study analyzed the preferred habitat and threats to the survival of Aconitum austrokoreense, found on Baekwun Mountain in Gurye-gun, Gwangyang-si, Jeollanam-do Province, and classified as a level two endangered wild plant by the Ministry of Environment, by investigating major environmental factors such as climate, location, soil, and stand structure. By examining five selected sites inhabited by Aconitum austrokoreense on BaekwunMountain, this study found that the habitat had an altitude of 420 to 675 m above sea level and showed a northeast tendency, spreading over a range of inclination angles between 15° and 37°. The average number of plants across the five sites was 156. Site 4 (550 m) had the highest density of 372 plants, with an average height of 0.6 m. The average soil moisture and relative light intensity were 20.48% and 7.34%, respectively. Layer soil was presumed to be sandy loam, characterized by high sand content and good drainage. The habitat had average soil pH of 5.2, average organic matter of 16.46%, average nitrogen of 0.86%, average available phosphate of 11.86 mg/kg, average electrical conductivity of 0.44 dS/m, and average cation exchange capacity of 37.04 cmolc/kg. The total carbon in soil averaged 10.68%. From the analysis of the vegetation structure of sites inhabited by Aconitum austrokoreense, the dominant populations were Pinus koraiensis and Lindera erythrocarpa in Site 1, Magnolia obovata and Carpinus laxiflora in Site 2, Zelkova serrate and Quercus variabilis in Site 3, Staphylea bumalda and Lindera erythrocarpa in Site 4, and Morus bombycis,Styrax japonicus, and Carpinus laxiflora in Site 5. With most habitats located near trails and sap collection sites of Acer pictum, the species were exposed to artificial damage and interference threats.

In Vitro Production of Indian Citrs Ringspot Virus-Free Plants of Kinnow Mandarin (Citrus nobilis Lour X C. deliciosa Tenora) by Ovule Culture

  • Singh B.;Sharma S.;Rani G.;Zaidi A.A.;Hallan V.;Nagpal A.;Virk G.S.
    • Journal of Plant Biotechnology
    • /
    • v.7 no.4
    • /
    • pp.259-265
    • /
    • 2005
  • Indian citrus ringspot virus (ICRSV)-free plants of Kinnow mandarin (Citrus nobilis Lour x C. deliciosa Tenora) were raised from virus-infected plants using unfertilised ovules as explants. Plants were tested by indirect ELISA and RT-PCR before using their explant. An amplified product of 539 bp was obtained by RT- PCR in ICRSV infected plants. Unfertilized ovules were excised from unopened flower buds of plants tested postive for virus and were cultured on Murashige and Skoog's (MS) basal medium supplemented with various concentrations of kinetin (KN) or malt extract (ME). Maximum induction (31.94%) of embryogenic callus was observed on MS medium supplemented with KN ($9.29\;{\mu}M$). Transfer of embryogenic calli to similar media composition resulted in somatic embryogenesis in all cultures, with an average number of 60.36 globular, 17.39 heart and 7.71 cotyledonary-shaped somatic embryos per culture. All cotyledonary shaped embryos developed into complete plantlets within 60 days on transfer to similar medium. Embryogenic callus induction, somatic embryo formation, maturation, germination and plantlet formation were achieved on MS medium supplemented with KN ($9.29\;{\mu}M$) alone. The plantlets derived from somatic embryos were transferred to sterilized soil, sand and vermiculite (3:1:1) mixture. After acclimatization, the plantlets were transferred to screen house and were indexed for ICRSV employing indirect ELISA and RT-PCR and found free of virus. A distinct feature of this study is the induction of somatic embryogenesis from unfertilised ovules to produce virus-free plants.

Finite Element Analysis for the Effects on the Stiffness of the Embankment and Sandmat on the Deformation Property and the Safety of Road Embankment (성토체 및 모래매트의 강성이 하부지반의 변형과 성토체의 안전에 미치는 영향에 대한 유한요소해석)

  • Bae, Woo-Seok;Kim, Jong-Woo;Kwon, Young-Cheul
    • Journal of the Korean Society of Safety
    • /
    • v.22 no.4
    • /
    • pp.57-65
    • /
    • 2007
  • Effects on the stiffness of the embankment and sandmat on the construction safety of road embankment was investigated in this study by the numerical experiments using FEM. Two points was mainly focused in this study especially. First the deformation characteristics by the change of the stiffness of sand mat and embankment was investigated by the analyzing the consolidation settlement at the center of the embankment and the lateral displacement at the toe of the embankment. And, the effect of the stiffness on the stress distribution characteristics was also investigated in this study. Furthermore, slope stability analysis was carried out to gain the safe factor by change the stiffness of the sandmat and the embankment. The objective of the study is supplying the result of the numerical experiments for the geotechnical engineers who use the FEM for the safety design of the soil structures. As a result, the stiffness of the superstructures greatly affects on the deformation characteristics both in consolidation settlement and lateral displacement. However, it can be aware that it is not dominants to the stress distribution in the aspect that the no changes in the residual excess pore water pressure. Therefore, the decision of the stiffness has to be carried out deliberately considering not only the consolidation the magnitude of the settlement and the lateral displacement, but the slope stability.

The Case of Industrial Factory Wastewater Treatment and Reusing by Using of Constructed Wetland (식물정화조를 이용한 공업용 폐수의 정화 및 재활용 사례)

  • 김혜주;이옥하
    • Korean Journal of Environment and Ecology
    • /
    • v.16 no.2
    • /
    • pp.179-187
    • /
    • 2002
  • Constructed wetland was built for industrial factory wastewater treatment with environmentally sound method from July to October, 2000. Ultimately this case study was carried out to conserve water quality of river and underground water and to provide wildlife habitat and rest place for people in the industrial area. The size of constructed wetland was 10m$\times$6m (upper area) with a treatment capacity of 2.5㎥ per day. It was supplied with wastewater 0.625㎥ at intervals of six hours. Vertical flow system was chosen to promote efficiency. Draining layer was built one meter in soil depth out of sand mixed with pebbles in a ratio of two to one. Perennial emergent plants, Phragmites communis, Typha orientalis, Juncus effusus, Iris pseudoacorus, 20 individuals per square meter were planted. In the aspect of reusing, eco-pond was created for increasing biological species diversity and also deck and information signboard were established for the education of environment. As the result of monitoring, it was revealed that the constructed wetland was effective in removal of BOD$_{5}$, COD, T-N, T-P and has being gradually improved as a wildlife habitat(biotope).

Comparison of Growth, Yield and Yield Components among Rice Cultivars for Organic Farming in No-tillage Paddy

  • Son, Daniel;Lee, Young-Han
    • Korean Journal of Environmental Agriculture
    • /
    • v.29 no.1
    • /
    • pp.1-6
    • /
    • 2010
  • Organic farming system in rice paddy is rapidly expanding in Korea. This study was to find out optimum japonica rice cultivars for organic farming. A field research was conducted to evaluate the characteristics of japonica rice cultivars under no-tillage paddy at Doo-ryangmyeon, Sacheon, Gyeongsangnam-do, Korea. The experimental soil was Juggog series (silty clay loam: 56.0% silt, 31.2% clay and 12.8% sand). In experiment, ten lines of Japanese rice cultivars were tested under no-tillage amended with rye (NTR) and no-tillage without cover crop treatment (NTNT). In addition, two Korean japonica rice cultivars as check cultivars were used in this study. The grain yield in NTR was significantly higher in 6.13 Mg $ha^{-1}$ for Kinuhikari, 5.30 Mg $ha^{-1}$ for Komekogane, 5.25 Mg $ha^{-1}$ for Kosihikari, 5.22 Mg $ha^{-1}$ for Mazizbare and 5.12 Mg $ha^{-1}$ for Akitakomachi compared to two Korean rice cultivars (4.57 Mg $ha^{-1}$ for Hwayoungbyeo and 4.00 Mg $ha^{-1}$ for Ilmibyeo) in that order. While, grain yield in NTNT was significantly higher in 4.90 Mg $ha^{-1}$ for Akitakomachi 3.81 Mg $ha^{-1}$ for Hinohikari, 3.74 Mg $ha^{-1}$ for Umezkusi, 3.67 Mg $ha^{-1}$ for Kosihikari and 3.54 Mg $ha^{-1}$ for Dondokuri compared to 3.02 Mg $ha^{-1}$ for Ilmibyeo and 2.36 Mg $ha^{-1}$ for Hwayoungbyeo, respectively. The number of panicle per $m^2$ and grain number per panicle were indispensible for increasing the yield of rice. These results were able to find out optimum japonica rice cultivar Akitakomachi for organic farming in no-tillage paddy.

Analysis on Behavior of Vertically Loaded Single Pile included in Pile Group (무리말뚝을 구성하는 외말뚝의 연직방향 하중지지 거동분석)

  • Lee, Seung-Hyun;Kim, Byoung-Il;Yoo, Wan-Kyu
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.10
    • /
    • pp.4863-4868
    • /
    • 2012
  • Static pile load tests were conducted on the two piles which comprised group pile installed in sand and the test results were compared with those obtained from load transfer method. Predicted load bearing capacity of the pile which locates center portion of the group pile was less than that from the load test and the reason is thought to be the densification of the soil due to the installation of the group pile. Predicted pile capacity of the API method, Coyle and Sulaiman method were 77%, 90% of the bearing capacity obtained from the load test, respectively. Comparing ultimate bearing capacities of the pile locating at the edge of the group pile, those predicted by the API method, Coyle and Sulaiman method were 1.1 times, 1.3 times of the bearing capacity obtained from the pile load test, respectively.

Estimation of Mobilized Passive Earth Pressure Depending on Wall Movement in Sand (모래지반에서 벽체의 변위에 따른 수동측토압 산정)

  • Kim, Tae-O;Park, Lee-Keun;Kim, Tae-Hyung
    • Journal of the Korean Geotechnical Society
    • /
    • v.36 no.11
    • /
    • pp.51-60
    • /
    • 2020
  • Estimation of passive earth pressure is an important factor in anchor block, temporary retaining wall and support block of raker that resist lateral earth pressure. In practice, due to ease of use, it is common to estimate the earth pressure using the theory of Coulomb and Rankine, which assumes the failure plane as a straight line. However, the passive failure plane generated by friction between the wall surface and the soil forms a complex failure plane: a curve near the wall and a flat plane near the ground surface. In addition, the limit displacement where passive earth pressure is generated is larger compared to where the active earth pressure is generated. Thus, it is essential to calculate the passive earth pressure that occurs at the allowable displacement range in order to apply the passive earth pressure to the design for structural stability reasons. This study analyzed the mobilized passive earth pressured to various displacement ranges within the passive limit displacement range using the semi-empirical method considering the complex failure plane.