• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.99-117
• /
• 2017

Rock physics modeling of sandstone reservoir from gas fields of Krishna-Godavari basin represents the link between reservoir parameters and seismic properties. The rock physics diagnostic models such as contact cement, constant cement and friable sand are chosen to characterize reservoir sands of two wells in this basin. Cementation is affected by the grain sorting and cement coating on the surface of the grain. The models show that the reservoir sands in two wells under examination have varying cementation from 2 to more than 6%. Distinct and separate velocity-porosity and elastic moduli-porosity trends are observed for reservoir zones of two wells. A methodology is adopted for generation of Rock Physics Template (RPT) based on fluid replacement modeling for Raghavapuram Shale and Gollapalli Sandstones of Early Cretaceous. The ratio of P-wave velocity to S-wave velocity (Vp/Vs) and P-impedance template, generated for this above formations is able to detect shale, brine sand and gas sand with varying water saturation and porosity from wells in the Endamuru and Suryaraopeta gas fields having same shallow marine depositional characters. This RPT predicted detection of water and gas sands are matched well with conventional neutron-density cross plot analysis.

• 한국조경학회지
• /
• 제28권2호
• /
• pp.61-70
• /
• 2000

The purpose of this study is to identify the proper species of turf and the ground structure for the turf sports grounds. Analysis items are particle distribution of sand and gravel, saturated hydraulic conductivity, soil hardness, and turf growth. Results of this study are as follows. 1)The particle distribution of sand used in the multi-layer rootzone is within the upper limit of the standard level. The diameter of mid-size grain({TEX}$D_{50}${/TEX})was 0.62mm and the value of uniformity ({TEX}$D_{90}${/TEX}/{TEX}$D_{10}${/TEX}) was 3.93. The particle size distribution of sand used in the single-layer rootzone was beyond the standard level as {TEX}$D_{50}${/TEX})=0.86 and {TEX}$D_{90}${/TEX}/{TEX}$D_{10}${/TEX}=8.86. 2) Saturated hydraulic conductivity of the sand was higher in the multi-layer rootzone than in the single-layer rootzone while bulk density was vice versa. 3) Surface hardness was high on Kentucky bluegrass+perennial ryegrass compared to zoysiagrass probably caused by root density. 4) Visual covering and visual rating were highly evaluated on zoysiagrass within summer while better evaluated on Kentucky bluegrass+perennial ryegrass throughout fall to spring. 5) Visual color was better evaluated on Kentucky bluegrass+perennial ryegrass than on zoysiagrass throughout the year. These studies are demanded urgently according to increase in interest in the ground and turf species of the turf sports ground because of World Cup 2002.

• 한국습지학회지
• /
• 제20권3호
• /
• pp.263-271
• /
• 2018

생활 하수 및 농축산 폐수를 통한 하천으로의 다량의 질소와 인의 유입은 부영양화를 초래하여 하천 자정작용에 악영향을 끼친다. 본 연구에서는 컬럼 실험을 통한 흡착제(활성탄, 제올라이트, 여과사)의 여재층 높이에 따른 암모니아성 질소, 인산염 제거특성을 분석하고, 밀도범함수이론(density functional theory, DFT)를 바탕으로 한 양자역학적 전산 모사를 통해 흡착제와 암모니아성질소($NH_4{^{+}}$)와 인산염($PO_4{^{3-}}$)에 대한 화학적 흡착 거동을 분석하였다. 컬럼 실험 결과, 암모니아성 질소에 대한 제거효율은 제올라이트(95.1%)>활성탄(65.8%)>여과사(10.7%), 인산염의 제거효율은 활성탄(99.6%)>제올라이트(18.8%)>여과사(10.9%) 순으로 나타났다. 제올라이트의 경우, 여재층의 높이에 관계없이 90%이상의 암모니아성 질소에 대한 높은 흡착력을 가졌고, 활성탄의 경우 여재층의 높이가 증가할수록 인과 질소에 대한 높은 흡착효율을 가졌다. DFT를 이용한 흡착제(산화 알루미늄, 활성탄, 여과사)와 영양염류($PO_4{^{3-}}$, $NH_4{^{+}}$)에 대한 흡착거동 분석결과, 제올라이트는 암모니아성 질소($NH_4{^{+}}$)에 대한 높은 흡착에너지(-6.43 eV)를 가졌다. 활성탄의 경우 여과사보다 좁은 HOMO-LUMO 밴드갭을 가져, 전자 이동에 유리한 환경을 조성하여 높은 흡착에너지(-7.10eV)로 영양염류가 제거되는 것을 확인할 수 있었다.

• 한국주조공학회지
• /
• 제22권3호
• /
• pp.137-143
• /
• 2002

Silica sand, zircon sand, and steel shots were used as mold packing materials in lost foam casting of the aluminum alloy bar. Vibration acceleration in three directions and temperatures in the casting and mold were measured, and packing and cooling characteristics of these materials were investigated. Packing densities increased with increase in vibration magnitude and time, and were $1.41{\sim}1.49g/cm^2$ for silica sand, $2.54{\sim}2.86g/cm^2$ for zircon sand, and $3.92{\sim}4.52g/cm^2$ for steel shots. Sound castings were obtained only without evacuation of the flask during pouring. Solidification time became faster in order of silica sand, zircon sand and steel shot packing because steel shot has the highest cooling capacity of them. Solidification time of steel shot packing was shortened to about 1/2 of silica sand packing. Cooling capacity of sand mold was generally evaluated by heat diffusivity of the mold, however could be simply evaluated with specific heat per unit volume of the packing material in lost foam casting.

• 한국지반환경공학회 논문집
• /
• 제14권1호
• /
• pp.33-42
• /
• 2013

In this paper, a series of monotonic undrained shear tests were carried out on four kinds of sand-fine mixtures with various fines content. Two kinds of sands (Silica sand V3, V6) and fines (Iwakuni natural clay, Tottori silt) were mixed together in various proportions, while paying attention to the void ratio expressed in terms of sand structure $(F_c{\leq}F_{cth})$. The undrained shear strength of mixtures below the threshold fines content was observed so that as the plastic fines content increases, maximum deviator stress ratio decrease for dense samples while an increase is noted for loose samples. For non-plastic fines, the increase in the amount of fines leads to an increase in density of the soil, which results in an increase in strength. Then, the monotonic shear strength of the mixtures was estimated using the concept of granular void ratio. It was found that the shear strength of mixtures is greatly dependent on the skeleton structure of sand particles.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1391-1398
• /
• 2009

The vibrating table method is widely used to estimate the minimum void ratio $e_{min}$. The existing method recommended in ASTM and KS F, however, can not consider the particle crushing during the vibrating table test. In this study, the particle cursing phenomenon was investigated by comparing vibrating table test with pluviation method using artificial sand (K-7). Vibrating table test for the artificial sand was confirmed which can crush of particle during the test. This study demonstrates that vibrating table test is an ineffective method to produce the more reliable $e_{min}$ of artificial sand.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1458-1465
• /
• 2010

A lot of dredging and reclaming projects are recently under way in Korea for the efficient use of limiting land space. Saemanguem area is special case of reclaiming by dredged soil. In case of a confined disposal of dredged soils by a pump dredger, generally coarse grained soils are separated from fines with dropping at the near part of the pump dredger. This kind of seperation of fine contents could be a factor of liquefaction by earthquake. In Korea, recently, earthquakes with magnitude of 3.0 or higher are distinctively increasing in 1990. In this study, cyclic shear characterics of Saemanguem Dredged sand depending on fine content were analyzed. A series of undrained cyclic triaxial test with cyclic stress ratio ($\sigma_d/{2\sigma_{{\upsilon}c}}'$) were performed on both isotropic consolidated specimen and sand with fine contents of 0%, 5%, 15%, 30%, 40% under the effective vertical stress of 100kPa and 50% and 60%, 70% of relative density for fine content of 0%, respectively. In the test results, cyclic shear strength increased by increasing of cyclic stress ratio($\sigma_d/{2\sigma_{{\upsilon}c}}'$) with increasing the relative density at the same number of cyclic under the effective confining pressure of 100kPa. It is almost highest the double amplitude(DA) 1%, 3%, 5%, 7.5% and 10% at fine content of 15% between Cyclic stress ratio($\sigma_d/{2\sigma_{{\upsilon}c}}'$) value at cyclic number five and fine content. Number of cyclic is 30 under the effective vertical stress of 100kPa, 70% of relative density for fine content of 15%. when the cyclic stress ratio at each relative density was compared at cyclic number five, the double amplitude(DA) 1%, 3%, 5%, 7.5% and 10%, and the pore-pressure ratio (${\Delta}u/{\sigma'}_c$) 0.95 value were compared; under the relative density of 70% and the effective confining pressure of 100kPa. The pore-pressure ratio (${\Delta}u/{\sigma'}_c$) 0.95 value showed a similar trend to the double amplitude (DA) 5% line.

• Weed & Turfgrass Science
• /
• 제7권2호
• /
• pp.148-157
• /
• 2018

본 연구는 외국산 피트를 포함해서 국내외 토양개량재 4종류가 크리핑 벤트그래스의 초기 활착 및 잔디밀도에 미치는 영향을 조사함으로 잔디밭 조성 시 실무에 활용할 수 있는 기초자료를 얻기 위해 수행하였다. 전체 20개 처리구는 식재층 모래에 유기질 토양개량재인 SABP (Berger peat), SAEP (Eco-peat), SAGS (G1-Soil) 및 SAPP (Premier peat)를 10-50% (v/v) 사이 혼합하여 준비하였다. 크리핑 벤트그래스의 초기 활착 및 밀도 변화는 토양개량재 종류에 따라 유의한 차이가 나타났다. 잔디밀도는 경시적인 변화가 나타나서 파종 2주 후 생육 초기 최저 36.7% (SABP 30)에서 최고 89.7% (SAGS 20)까지 처리구간 차이가 53% 정도 나타났다. 하지만 파종 6주 전후로 성숙기 밀도 수준에 도달해서 SABP 및 SAEP 일부 혼합구를 제외한 대부분 처리구에서 잔디밀도는 90% 전후로 비슷하였다. 실험 종료 시 최종 활착율은 최저 60.7% (SAEP 10)에서 최고 96.7% (SAPP 50)까지 처리구간 차이가 36.0%나 크게 나타났다. 잔디 활착율 및 밀도에 대한 최적 혼합율은 개량재 종류에 따라서 일정하지 않았다. SABP와 SAGS 개량재의 최적 혼합비율은 각각 10% 및 20%로 나타났지만, SAEP와 SAPP 개량재는 50%가 최적의 비율로 나타났다. 따라서 잔디밭 조성 전에 과학적인 분석을 통해 개별 토양개량재의 적정 혼합비율을 결정해서 실무에 적용하는 것이 필요하며, 또한 향후 주요 잔디 초종에서 외국산 및 국내산 토양개량재가 잔디생육에 미치는 종합적인 포장 적응성 실험을 통해 실무 응용에 활용하는 것이 바람직하다.

• Ocean Science Journal
• /
• 제41권3호
• /
• pp.139-148
• /
• 2006

The distribution of the taxonomical composition and the density of meiobenthos depending on the sediment type has been studied in bottom sediments of Nha Trang Bay. The maximal population density and the taxonomical diversity were observed in the silted coarse and heterogeneous sand ($1031.4{\pm}419.7\;ind.\;10\;cm^{-2}$), whereas the minimal level of density and diversity ($588.1{\pm}152.5\;ind.\;10cm^{-2}$) was in the coarse and heterogeneous sand with shell debris and corals. The correlation between the median diameter of sediment particles and population density of meiobenthos has been revealed (r=0.82, p<0.05). In bottom sediments of Nha Trang Bay, twenty six taxonomic groups of meiobenthos were observed. Nematodes dominated in all sediment types. Representatives of four orders, twenty eight families and ninety seven genera of marine nematodes were identified. The vertical distribution of meiobenthos in different sediment types was considered. A sediment column (10 cm height) was sectioned by five 2 cm portions. In the last layer (8-10 cm) the most number of meiobenthic groups was found in sandy sediments. In the lower layers of silt sediments, only nematodes were found.

• 한국지반공학회지:지반
• /
• 제3권3호
• /
• pp.7-20
• /
• 1987

교번 삼축 압축시험, 교번 전단응력 시험, 액상화 시험 및 진동 테이블 시험 등을 하기 위하여 제작되는 공시체로서 잘 다져진 모래를 사용하게 되며 진동에 의해 다져진 모래의 공시체가 균일한 밀도를 갖는다는 가정하에 상기한 실험을 하여 왔다. 지금까지 이러한 가정에 대한 연구가 충분히 되어 있지 않았으며 신뢰도 높은 실험을 하기 위하여는 공시체내에 모래의 밀도가 균일한 공시체를 제작하는 것이 중요하다. 이 연구에서는 진동에 의해서 모래 공시체를 제작할 경우 공시체내에 밀도의 변화가 발생하는지 여부와 각 진동인자가 밀도변화에 미치는 영향을 조사하였다. 이 연구 결과 진동 전에 균일한 밀도 를 갖는 공시체가 진동 후엔 공시체의 높이에 따라 상당한 밀도의 변화가 발생하였음을 보였으며 이러한 현상은 과재 하중, 입도 및 진동가속도의 크기에 따라 상당한 영향을 받는 것으로 밝혀졌다.