• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.3057-3075
• /
• 2020

End-to-end network delay plays an vital role in distributed services. This delay is used to measure QoS (Quality-of-Service). It would be beneficial to know all node-pair delay information, but unfortunately it is not feasible in practice because the use of active probing will cause a quadratic growth in overhead. Alternatively, using the measured network delay to estimate the unknown network delay is an economical method. In this paper, we adopt the state-of-the-art matrix completion technology to better estimate the network delay from limited measurements. Although the number of measurements required for an exact matrix completion is theoretically bounded, it is practically less helpful. Therefore, we propose an online adaptive sampling algorithm to measure network delay in which statistical leverage scores are used to select potential matrix elements. The basic principle behind is to sample the elements with larger leverage scores to keep the traits of important rows or columns in the matrix. The amount of samples is adaptively decided by a proposed stopping condition. Simulation results based on real delay matrix show that compared with the traditional sampling algorithm, our proposed sampling algorithm can provide better performance (smaller estimation error and less convergence pressure) at a lower cost (fewer samples and shorter processing time).

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.87-92
• /
• 1988

In this paper, a new focusing method, to be called the pipelined sampled delay focusing (PSDF), is implemented. This method improves the lateral resolution in ultrasound imaging system. In PSDF, the analog belay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, the method offers continuous dynamic focusing on the resolution pixel basis, and eliminates the constraint that the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권9호
• /
• pp.517-522
• /
• 1999

This paper addresses the issue of current sampling in a high performance AC drive system fed by a discontinuous PWM inverter. The effect of the sampling error due to the measurement delay produced by an input stage low pass filter and an A/D converter is described in the case of discontinuous PWM. To compensate for the sampling error, a method to estimate the delay time of the whole measurement system based on the measured current is proposed and its effectiveness is verified by experimental results. The proposed algorithm can automatically estimate the system delay introduced by the low pass filter and the A/D converter at the commissioning stage. By delaying the current sampling by the estimated value, experimental results indicate that more than 50% reduction of current ripple can be achieved.

• Journal of Nutrition and Health
• /
• 제26권4호
• /
• pp.443-454
• /
• 1993

The purposes of this study were to analyze the work patterns of selected hospital foodservices by Work Sampling methodology, and to investigate the relationship among operational factors affecting productivity. The hospitals were classified into 3 groups by the percentage of patient meals, and the percentage of special patient diet, and the menu items of patients meals. The groups clustered were characterized by productivity. Work Sampling methodology was utilized to analyze the work patterns of hospitals with selected 3 hospitals to investigate the productivity the productivity and labor times used in each work functions. Productivity index analyzed by Work Sampling were 10.36 min/meal, 10.95 min/meal, and 12.19 min/meal, respectively X, Y, Z hospital. Z hospital was significantly different from time used in direct work function and delay. Direct work function time was the highest, delay the lowest in Z hospital. The relation between the results of Work Sampling and the productivities of 3 groups showed not by delay but direct work function in the classification used in this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.87.5-87
• /
• 2001

In the past, we presented the tracking system with one sampling delay. In this paper, first we propose a tracking system with N-th sampling delay, in the case where an input-output pulse transfer function of a plant Z$\_$-N/. Secondly we propose a system configuration converting an input-output pulse transfer function of a plant into Z$\_$-N/ with the inverse system of the plant. Moreover, the proposed tracking system configuration is applied to an actual Ball and Beam system and good results are obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1235-1238
• /
• 1987

In this paper, a new focusing method, to be called the sampled delay focusing (SDF), is proposed. This method improves the lateral resolution in ultrasound imaging system. In SDF, the analog delay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, this method offers continuous dynamic focusing on the resolution pixel basis if the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.

• 한국음향학회지
• /
• 제22권8호
• /
• pp.680-686
• /
• 2003

디지털 도파관 모델은 악기의 물리적 모델링에 사용되는 일반적인 방법이다. 디지털 도파관 모델에서 파동의 움직임은 시간 또는 공간을 기준으로 해석 가능하다. 음의 샘플링이 시간을 기준으로 이루어지므로 악기 모델은 시간에 의한 파동의 움직임으로 묘사되는 것이 일반적이다. 본 논문에서는 현에 대한 공간 기준의 디지털 도파관 모델에 악기 몸체 모델을 추가해 악기 음을 합성하였다. 그렇게 함으로써 합성 음의 음질을 향상시키고 악기 모델의 음색 조절 변수들을 효과적으로 처리할 수 있었다. 공간 기준 샘플링에서 현 및 몸체에서 발생하는 미소 지연 오차에 대해 설명하고 FD (Fractional Delay) 필터를 이용해 미소 지연을 처리하는 방법을 보였다. 그리고 지연에 수에 따른 합성음의 변화를 설명하고 그 결과를 시간 기준 디지털 도파관 모델과 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1474-1479
• /
• 2004

In this paper, the design of the network system using the CAN and the analysis of effects of time delay in the system are presented. A conventional implementation technique induces many problems because of the amount and complexity of wiring and maintenance problems. The network system reduces these problems, but it cause another problem; time delay. Time delay in a sampling time does not have much effects on the system, but time delay over the sampling time changes the control frequency and ended up makes the system unstable. It is verified that time delay between each parts has different effects on the entire system. The results from this paper will be a base for studying algorithms to reduce effects of time delay in the system using the CAN.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.899-903
• /
• 2019

네트워크 제어 시스템에서는 송신 신호의 시간 변동 지연이 불가피하다. 전송 지연이 고정된 샘플링 시간보다 길면 시스템이 불안정해진다. 이 문제를 해결하기 위해 본 논문은 논리 기반의 퍼지 신경망을 이용하여 지연을 예측하는 방법을 제안하며, 예측된 시간 지연은 네트워크 제어 시스템의 샘플링 시간으로 사용된다. 제안된 방법의 효과를 검증하기 위해, 실제 시스템에서 수집된 지연 데이터를 사용하여 논리 기반 퍼지 신경 네트워크를 훈련하고 테스트한다.

• 제어로봇시스템학회논문지
• /
• 제9권8호
• /
• pp.632-639
• /
• 2003

This paper proposes a simple compensation scheme for the time delay caused by measurement, calculation and selection of voltage vector in Direct Torque Control (DTC) of an induction motor. In general scheme, it is difficult to know the exact delay time, furthermore the delay time can be varied by program routines for calculation and processing of measured data. In this proposed scheme, by applying voltage vector at the beginning of next sampling period, a fixed delay time is achieved and its compensation becomes much simpler. Furthermore, with the simple compensation algorithm, an improved performance can be achieved by shortening sampling period. Experimental results prove the feasibility of the proposed scheme in induction motor control.