• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.180-187
• /
• 2007

In this paper, we propose an automatic method which combines two or more images acquired by camera on the air-vehicle into a larger image mosaics. The shift, scaling, rotation factors between two images can be calculated by using the correspondences between the points of the images. In order to estimate these factors, we find the relative positions of two images with respect to each other by using the SIFT descriptor and the RANSAC algorithm. After estimating the factors, the images can be merged into a single image mosaic by warping the target image. To avoid seams when mosaics are constructed from overlapped images, we apply the average gray level value of points within a overlapped zone. We have tested our proposed method on various image sets and have confirmed that our method produced good result subjectively.

• Journal of Information Technology Applications and Management
• /
• v.27 no.6
• /
• pp.75-87
• /
• 2020

The Human Resource (HR) system comprises of various interrelated HR practices that forms the bundles. These bundles of Human Resource practices impact the organizational performance. The hard and soft HR bundles are the two sets of the same continuum that describes the strategic approach of the HR system. The purpose of this study is to identify the hard and soft HRM practices from the literature and then empirically test them with the help of factor analysis. The study is conducted on the service industry employees in India. The survey includes the employees from the middle and top-level executives of the service firms. The sample size for the study is 160. Principal component analysis with VARIMAX rotation and Confirmatory Factor Analysis was used to obtain the results. The data analysis was done on SPSS V.20 and AMOS V.22. The results provide knowledge of the HR practices under the hard and soft HRM bundles implemented in the service industry.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05a
• /
• pp.8-8
• /
• 1992

The study of magnetic properties of ferro and ferri-magnetic materials has shown that, due to their different time constants, magnetisation mechanisms (domain wall displacement, spin rotation and wall bulging) can be separated by using the complex permeability formalisms, they exhibit characteristic features in $\mu$′ versus $\mu$" plots. In many cases. the elements (inductances, resistances and capacitances) of the equivalent circuit representing the friquency behaviour, can also be associated with physical parameters of the sample [1-3]. In a different approach, domain wall dynamics can be represented by a motion equation with mass, damping and restoring force terms [4]. In this paper, we show that these two approaches are consistent and how they are related.

• The Journal of Information Systems
• /
• v.32 no.4
• /
• pp.189-210
• /
• 2023

Purpose This study aims to investigate factors that positively influence the continuous Artificial Intelligence(AI) Learning Continuity of business major students. Design/methodology/approach To evaluate the impact of AI education, a survey was conducted among 119 business-related majors who completed a software/AI course. Frequency analysis was employed to examine the general characteristics of the sample. Furthermore, factor analysis using Varimax rotation was conducted to validate the derived variables from the survey items, and Cronbach's α coefficient was used to measure the reliability of the variables. Findings Positive correlations were observed between business major students' AI Learning Continuity and their AI Interest, AI Awareness, and Data Analysis Capability related to their majors. Additionally, the study identified that AI Project Awareness and AI Literacy Capability play pivotal roles as mediators in fostering AI Learning Continuity. Students who acquired problem-solving skills and related technologies through AI Projects Awareness showed increased motivation for AI Learning Continuity. Lastly, AI Self-Efficacy significantly influences students' AI Learning Continuity.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.518-521
• /
• 2004

Ginseng saponin was isolated from panax ginseng root using high-speed countercurrent chromatography (HSCCC). Preliminary studies were performed to optimize physical properties of two-phase solvent system and operating parameters including rotation speed of column, elution mode of mobile phase, and flow rate. Two-phase solvent system for isolation of ginseng saponins was composed of chloroform, water, and methanol as blending solvent. Chloroform-aqueous methanol (4:6) systems with various concentration of methanol in water were evaluated for retention of stationary phase in column. Retention of stationary phase decreased with increasing flow rate in tail-to-head elution mode using upper phase as mobile phase and head-to-tail elution mode using lower phase as mobile phase. Latter mode produced high retention at flow rate of 5 mL/min. Optimum conditions for isolation of saponin were chloroform/methanol/water (40/39/21) solvent system; mobile phase, of lower organic layer, flow rate, of 5 mL/min, head to tail elution mode, rotation speed, of 800 rpm, and sample injection, of $200{\mu}L$, Recovery yield of ginseng saponin from panax ginseng root extract by HSCCC was 63.6%, and the purity of HSCCC fractions was verified by TLC.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.61-67
• /
• 1997

Piezoelectric gyroscopes are the devices to measure angular rotational velocity of a system with respect to an inertial frame of reference means of the Coriolis principle. Most of current piezoelectric gyroscopes detect rotational velocity about a single axis of rotation. This paper describes development of a new dual axial gyroscope made out of the piezoelectric ceramic, PZT, which can overcome the limitation of the current single axial type. The validity of the new structure is checked through finite element analysis. Based on the design, an experimental sample of the sensor is fabricated and its performance is discussed in comparison with the theoretical expectation. The resutls show that the present gyroscope is capable of measuring the rotational velocity over two orthogonal axes simultaneously with good enough sensitivity and distinction between the two axial components of the rotation.

• Journal of Korean Society of Forest Science
• /
• v.95 no.4
• /
• pp.443-452
• /
• 2006

This study was conducted to investigate the site and growth characteristics of Mackia amurensis stand in natural forest of Mt. Joongwang, Pyongchang-Gun, Gangwon-Do, Korea. The 28 sample plots ($30m{\times}30m$) were established to examine the vegetation and site characteristics for M. amurensis stand. Stem analysis was performed on two sample trees for each of the 5 plots situated at intervals of 100 m by altitude. M. amurensis trees were mainly distributed at the ridge and the slope facing north, with altitudes ranging from 790 to 1,170 m. The M. amurensis grew at relatively deep A-layer of soil with high moisture but infertile. Dominant species with M. amurensis were Quercus mongolica, Fraxinus rhynchophylla, Acer pseudo-sieboldianum, A. pictum subsp. mono, Ulmus davidiana var., japonica, Tilia amurensis, and Populus davidiana. TWINSPAN classified four communities in Mt. Joongwang area; M. amurensis-P. davidiana community (xeric type), M. amurensis-U. davidiana var. japonica community (xeric type), M. amurensis-T. amurensis community (moist type), and M. amurensis-Styrax obassia community (moist type). According to the community type, trees per ha were more abundant in the area of the moist types than the xeric types. Height growth of M. amurensis increased with increasing ages until 10 years, and then decreased thereafter, especially at altitude of 1,020m. M. amurensis showed rapid early growth of height and volume, indicating possible high biomass production under enough light. Growth of M. amurensis increased greatly at about 40 years if released from severe competitions. The rotation age of natural M. amurensis stand was expected for above 50 years.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.32.3-33
• /
• 2015

There exist scaling relations that link the mass of supermassive black holes with both the velocity dispersion and the mass of the central stellar cusp of their host galaxies. This implies that these two components grow in tandem. Feedback from actively accreting supermassive black holes (AGN), in the form of multi-phase gas outflows, has been argued to be the agent of this co-evolution. Here we employ the powerful GMOS integral field spectroscopy unit on the 8.2m Gemini-North telescope to investigate ionized gas outflows of luminous Type 2 AGN in the local Universe (z<0.1). Our sample of 6 galaxies is drawn from the Sloan Digital Sky Survey (SDSS) and was selected based on their [OIII] dust-corrected luminosity (>1042 erg/s) and signatures of outflows in the [OIII] line profile of their spatially integrated SDSS spectra. These are arguably the best candidates to explore AGN feedback in action since they are < 1% of a large local type 2 AGN SDSS sample selected based on their [OIII] kinematics. We combine a careful spectral decomposition of the [OIII] and $H{\alpha}$ line profiles with spatial information on ~0.5kpc scales to understand the outflow kinematics and energetics in these objects. We find clear evidence for strong outflows in [OIII] and occasionally $H{\alpha}$ that are clearly driven by the ionizing radiation of the AGN. We kinematically and spatially decompose outflowing and rotating ionized gas components. We find [OIII] to be a better tracer of AGN outflows, while $H{\alpha}$ appears to be strongly affected by both stellar rotation and outflows induced by ongoing star formation. The observed kinematics and spatial distribution of the ionized gas imply a large opening angle for the outflow. Finally, we find the projected outflow velocity to decrease as a function of distance, while its dispersion shows a more complex structure with a potentially initially increasing trend (out to 0.5-1kpc distances).

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.103-114
• /
• 1993

The purpose of this study was to determine whether any difference existed in craniofacial morphology between parents of children with cleft lip and/or palate and parents of children without cleft lip and/or palate as well as the characteristics of craniofacial morphology in parents of children with cleft lip and/or palate. Thirty three measurements of the various regions of cranium and face were obtained from lateral cephalometric radiograms in parents of 28 children with cleft lip and palate, 18 children with cleft lip, and 22 children with cleft palate. There were 28 couples and 40 single parents in this sample. There were 92 individuals including 41 males and 51 females. The measurements were compared with those in control subjects, including 40 adult males and 40 adult females, who had no history of craniofacial abnormalities. The total sample was compared for the sex independently. The obtained results were as follows. 1. In the cranium, both parents of cleft children had significantly shorter posterior cranial base length(S-Ba). 2. In the upper face, a significantly shorter anteroposterior length of maxilla(A'-Ptm'), particularly in the anterior region (A'-K), anterior facial depth(A-SBaL), posterior facia! height(Ptm'-SNL) and relation of subnasale to the cranial base (∠BaN'Sn) were noted in fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers. 3. In the lower face, both parents of cleft children showed a significantly greater Y axis angle(∠NSGn) and ramal plane angle(∠SNL-RP) in fathers of cleft children. Thus both patents showed a posteriorly rotation of mandible. The thickness of the lower lip(B-B') was significantly thicker in fathers of cleft children. 4. In the facial profile, a significantly shorter posterior facial height(S-Go) and greater angle of soft tissue facial convexity (∠BaN'Pog') were noted in the fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers.

• Journal of the Korean Society of Radiology
• /
• v.9 no.6
• /
• pp.403-408
• /
• 2015

Hard X-ray has been widely used in medical and industrial fields because it can be applied to observe the inside of a sample. Computed tomography provides sectional images of the sample through the reconstruction of the projection images. The quality of sectional images strongly depends on that of projection images. Ring artifact appeared on the seconal image can be made by the abnormal pixels of the detector used. In this study, we examine the ring artifact ratio in the circle phantom as a function of detection error of the detector used in computed tomography. The ring artifact increased with the increment of detection error under parallel and fan beam geometries and strongly increased near the center of rotation. The corrections, dead pixel and flat field corrections, for the images taken with the detector are required before the image reconstruction process to reduce the ring artifact in the computed tomography.