• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.364-367
• /
• 2004

The purpose of this study is to investigate quality of recycled fine aggregate manufactured by drying manufacturing system which is the manufacture method of high quality recycled fine aggregate, and to analyze on the fresh, hardened and durability properties of recycled concrete using it. Therefore it is to present the fundamental data for structural application of recycled concrete. The results of this study are as follows; Quality of recycled fine aggregate by drying manufacturing system is improved, and compressive and tensile strength of recycled concrete using high quality recycled fine aggregate are similar to those of normal concrete. But, durability such as carbonation, salt damage and dry shrinkage show decreased somewhat.

• 한국분말재료학회지
• /
• 제5권4호
• /
• pp.241-249
• /
• 1998

Sintering kinetics of ball-milled $MoSi_2$ was studied with the addition of Ni. $MoSi_2$ powder with the average particle size of 1 $\mu\textrm{m}$ was obtained from ball-milling of 10 $\mu\textrm{m}$ powder. Small amount of Ni was added to the ball-milled $MoSi_2$ powder by salt solution and reduction method. The powder was compacted into cylindrical shape at 200 MPa and isothermally sintered in a $H_2$ atmosphere at the temperature range of 1100~$1400^{\circ}C$ for 3~600 minutes. The changes of linear shrinkage and sintered density were monitored as a function of sintering time. The microstructure was observed by using optical microscopy and scanning electron microscopy. Phases were identified by X-ray diffratometer and electro-probe micro analysis. Sintering kinetics of Ni-added powder was compared to as-milled powder and the apparent activation energy was calculated from Arrhenius plot.

• Journal of the Korean Wood Science and Technology
• /
• 제9권4호
• /
• pp.1-21
• /
• 1981

미송(美松) 및 포푸라 내수합판(耐水合板)을 내장용내화제(內裝用耐火劑)로 가압처리한 다음 저온(低溫), 중온(中溫) 및 고온건조상태(高溫乾燥狀態)에서 재건조(再乾燥)를 실시(實施)하였다. 붕사(硼砂)-붕산(硼酸), 크롬화(化) 염화아연, 미나리스, 파이레소오트 및 일종(一種)의 상업용(商業用) 내화제(耐火劑)로 내화처리(耐火處理)를 실시(實施)하였다. 건조방법(乾燥方法)은 키른건조(乾燥)와 열판건조(熱板乾燥)를 적용(適用)하였으며 건조속도(乾燥速度)와 건조결함(乾燥缺陷)에 관하여 검토(檢討)하였다. 붕사(硼砂)-붕산(硼酸)은 수분처리합판(水分處理合板)과 유사(類似)한 건조속도(乾燥速度)를 나타내었으나 기타(其他)의 내화제(耐火劑)는 일층(一層) 늦은 건조속도(乾燥速度)를 나타내었고 더 많은 건조결함(乾燥缺陷)을 일으키는 경향(傾向)이 있었다. 특(特)히 크롬화(化) 염화아연은 가장 건조속도(乾燥速度)가 느렸으며 가장 많은 건조결함(乾燥缺陷)을 일으키는 경향(傾向)이 있었다. 열판건조(熱板乾燥)는 키른 건조(乾燥)와 비교(比較)하여 같은 온도수준(溫度水準)에서 삼배(三倍)나 더 빨리 건조(乾燥)하였으나 열판압력을 50 $1b/in^2$(3.52$kg/cm^2$)를 적용(適用)하였기 때문에 두께 수축율(收縮率)은 이배(二倍)를 나타내었다.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1218-1230
• /
• 1994

In manufacturing process of porous glass-ceramics by the filler method, the sintering behaviour of crystallizable glass powder mixed with various salts was studied and also the effects of precipitated crystal phases on the properties of porous glass-ceramics were investigated. Fine-grained crystallizable glass powder was homogeneously mixed with various slat having grain size 100~200 ${\mu}{\textrm}{m}$ and sintered for densification. After washing out the inorganic salt with distilled water, the porous sintered body was heat treated additionly for crystallization. The MgO-Al2O3-SiO2 base glass was used as crystallizable glass powder and the water soluble salts such as K2SO4 and MgSO4 were used as filler. When K2SO4 was used, leucite crystal phase was formed as a result of the ion exchange and porous glass-ceramics which exhibit high temperature resistance and high thermal expansion coefficient of 17$\times$10-6/$^{\circ}C$ could be obtained. On the contrary, when MgSO4 was used, only slight ion exchange is observed and $\mu$-cordierite and $\alpha$-cordierite crystal phases were formed and porous glass-ceramics which exhibit low thermal expansion coefficient schedule were determined with the results of DTA curves, thermal shrinkage curves and XRD patterns analysis. From DTA curves and thermal shrinkage curves, it was found that the sintering densification have been completed at the temperature range of exothermic peak for crystallization. The pore size distributions and pore diameters were measured by mercury porosimeter. The pore diameter of porous glass-ceramics was 10~15 ${\mu}{\textrm}{m}$ when 100~200${\mu}{\textrm}{m}$ grain size of K2SO4 was used and it was 25~30 ${\mu}{\textrm}{m}$ when the same grain size of MgSO4 was used. The porous glass-ceramics K2SO4 used shows bimodal pore size distribution and its porous skeleton structure was ascertained by SEM observation.

• 한국수산과학회지
• /
• 제53권4호
• /
• pp.583-587
• /
• 2020

Imitation fish roe (IFR) based on calcium alginate hydrogels (CAG) can be heat treated for sterilization and salted to prolong the shelf life. However, these processes change the physical properties of IFR, and it is necessary to minimize these changes. In this study, we investigated the effects of xanthan gum (XG) treatment on the quality and stability of IFR. Both non-XG and XG-treated IFRs were treated with boiling water (95℃), sodium chloride (0.5-2.0%, w/v), and autoclaving. The non-XG treated IFR shrunk slightly after the boiling water and autoclaving processes. By comparison, shrinkage of the XG-treated IFR after autoclaving was significantly reduced. The sphericity of the non-XG treated IFR was reduced by the boiling water, sodium chloride, and autoclaving treatment. However, the sphericity of the XG-treated IFR was maintained by 90% or more, preserving the IFR shape at a level visually recognized as spherical. In addition, unlike the non-XG treated IFR, the XG-treated IFR showed high rupture strength even after the salt and heat treatments. Our findings provide useful information for the industrialization of IFR based on CAG with heat and salt treatments.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권4호
• /
• pp.588-595
• /
• 2003

The optimum level of fresh granulated low-calcium (0.2%) skim milk co-precipitate, as fat substitute in low-fat ground pork patties was determined on the basis of physico-chemical, cooking and sensory properties. Low-fat ground pork patties (<10% total fat), formulated with 15 per cent water, 4 per cent added fat, 1.5 per cent salt and 4-10 per cent milk co-precipitate, were evaluated for proximate composition, cooking characteristics and compared with control patties with 15 % added fat. The moisture and protein content of raw and cooked low-fat patties were significantly (p<0.05) higher than control. The incorporation of milk co-precipitate in low-fat patties improved cooking yield, fat and moisture retention and reduced shrinkage. The sensory properties of low-fat patties were comparable with control patties. The overall acceptability of low-fat patties formulated with 7% milk co-precipitate was significantly (p<0.05) higher than patties with 10% level and non-significantly (p<0.05) higher than low-fat patties containing 4% milk co-precipitate and control. Instrumental Texture Profiles of developed low-fat patties and control patties were comparable with slight increases in hardness and gumminess of the low-fat product. The developed low-fat ground pork patties (7% milk co-precipitate) had lower TBA values, better microbiological and sensory refrigerated storage stability than high-fat control patties packaged in air permeable films for 21 days.

• 한국잠사곤충학회지
• /
• 제23권1호
• /
• pp.65-69
• /
• 1981

絹의 錫加工에 있어서 鹽化第二錫과 알미늄鹽의 倂用處理條件이 增量率에 미치는 影響을 究明하고 錫加工絹의 物性變化에 관한 基礎的인 處理條件을 檢討하였다. 1. 絹의 錫加工時 알미늄鹽의 適正處理濃度는 5%內外이었다. 2. 錫과 알미늄鹽 倂用處理區의 絹布增量率은 44%로서 錫單一處理區의 28%에 비하여 16%가 向上되었으나 處理絹布의 防皺度는 若干 低下되며 剛軟度는 增加하는 傾向이었다. 3. 錫加工絹布의 soaping에 의한 收縮率은 錫 單一處理區와 錫 및 알미늄倂用處理區 모두 對照區에 비하여 顯著히 減少되었다. 4. 錫加工絹布의 染色過程에서의 脫着率은 反應性染科로 染色할 경우 酸性染科染色에 비하여 減少되었다. 5. 錫加工絹布에 柔軟劑處理를 하므로서 剛軟度를 低下시키므로서 錫處理絹布의 柔軟性을 向上시킬 수 있었다.

• 한국응용과학기술학회지
• /
• 제10권1호
• /
• pp.49-55
• /
• 1993

Ground Calcium Carbonate, among paper coating pigments, will influence less dispersant demand, less binder demand, increase coating solids from 58% to 70%, which means high speed coating, less shrinkage during drying, less energy consumption, more uniform coverage of fibers. The quality point of view of Ground Calcium Carbonate, brightness, particle size, Particle size distribution, hardness, impurities content are important. More important factors of Ground Calcium Carbonate which influence the paper coating process are dispersion mechanisms and their effects. The study was made to investigate the effect of Ground Calcium Carbonate dispersion by sodium salt of polyacrylate dispersant composition and dispersion condition. Basic tests such as physical, optical and chemical were perfumed, and dispersion effects were investigated by different conditions. The results showed that the type of dispersant affected the dispersion effects, and the Ground Calcium Carbonate has critical dispersant demand.

• 한국염색가공학회지
• /
• 제8권4호
• /
• pp.42-51
• /
• 1996

Alkaline hydrolysis to improve the hand of PET/acetate union fabric was studied in relation to skin saponification and retarding effect of salts on the alkaline hydrolysis of cellulose acetate fiber, accelerating effect of salts on the alkaline hydrolysis of PET fiber, and changes of total hand value(T.H.V) of PET/acetate union fabric treated with alkali/salt solution. It was found that the rate of saponification of acetate was delayed by the addition of salts such as LiCl, NaCl and CH$_{3}$COONa into NaOH solution below 10 minutes. The rate of shrinkage of acetate fabric treated with 5g/l NaOH solution at 9$0^{\circ}C$ and 60 minutes showed 20 % but it was decreased 8% by. the addition of 120g/l Concentration of inorganic salts. We could know that the rate of alkaline hydrolysis of filament yarn treated with alkali solution at 9$0^{\circ}C$ and 60 minutes was delayed about 3 % using 2,000T/M of hard twist yarn, especially acetate filament treated with alkali solution at 9$0^{\circ}C$ and 10 minutes was delayed about 10%. T.H.V. of PET/acetate union fabric was increased from 2.77 to 3.04~3.18 by the addition of salts into alkali solution.

• Advances in concrete construction
• /
• 제5권6호
• /
• pp.671-683
• /
• 2017

Commonly used concrete in general, consists of cement, fine aggregate, coarse aggregate and water. Natural river sand is the most commonly used material as fine aggregate in concrete. One of the important requirements of concrete is that it should be durable under certain conditions of exposure. The durability of concrete is defined as its ability to resist weathering action, chemical attack or any other process of deterioration. Durable concrete will retain its original form, quality and serviceability when exposed to its environment. Deterioration can occur in various forms such as alkali aggregate expansion, freeze-thaw expansion, salt scaling by de-icing salts, shrinkage, attack on the reinforcement due to carbonation, sulphate attack on exposure to ground water, sea water attack and corrosion caused by salts. Addition of admixtures may control these effects. In this paper, an attempt has been made to replace part of fine aggregate by tailing material and part of cement by fly ash to improve the durability of concrete. The various durability tests performed were chemical attack tests such as sulphate attack, chloride attack and acid attack test and water absorption test. The concrete blend with 35% Tailing Material (TM) in place of river sand and 20% Fly Ash (FA) in place of OPC, has exhibited higher durability characteristics.