• 대한화학회지
• /
• 제46권1호
• /
• pp.7-13
• /
• 2002

자화수가 특이한 물리화학적 성질을 갖고 있음은 여러 학자들에 의하여 꾸준히 연구되어 왔는데, 아직도 자화수의 특성이 명확하게 설명되지 못하고 있는 실정이다. 본 연구에서는 자화수가 염류들의 침전반응 및 석고의 가수 경화반응에 미치는 영향을 다음과 같이 관찰하였다. $25^{\circ}C$ 항온조 내부에서 실시한 salt filter assay 방법으로 침전반응을 조사하였으며, $20^{\circ}C$ 실온에서 석고의 가수 경화반응 시간을 Gillmore needle의 방법으로 측정함으로써 석고의 가수 경화 속도를 조사하였다. 0.1M 염 이온들을 반응시킨 염류의 침전 반응 결과, $BaSO_4,\;BaCO_3,\;CaCO_3$의 침전 생성물의 양은 대조군의 증류수에 비하여 자화수에서 각각 약 3.6%, 3.8%, 4.4% 씩 증가되었으며, 석고의 최종 경화시간은 대조군의 증류수에 비하여 자화수에서 현저하게 감소되었으므로 자화수가 석고의 가수 경화속도를 촉진시키는 것으로 나타났다. 이는 대조군의 증류수에 비하여 자화수는 물분자가 치밀하게 구조화되어서 수많은 cluster들을 형성함으로서 물분자 사이의 결합 및 반응력이 증가되며, $Ba^{2+}$ 또는 $Ca^{2+}$ 같은 염류들에 대하여 특징적으로 반응해 침전반응 속도와 가수 경화 반응 속도가 증가된 것으로 추측된다.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.257-260
• /
• 2007

In order to further improve the corrosion resistance and wear resistance of the Ni-P coatings of electroless plating, electroless Ni-P/n-$Al_2O_3$ composite deposits were prepared by adding some nano $Al_2O_3$ Particles in Ni-P plating bath. The bath composition and proproties were studied in this paper. The orthogonal test was applied in order to get the new composite solution, taking the initial stable potential as evaluation standard and considering the elements correlation at the same time. The processing parameters have been optimized by single factor experiment in which the depositing speed was chosen as the evaluation standard. The results showed that the process is stable and the composite Ni-P/n-$Al_2O_3$ deposits werebright and smooth, whose hardness and corrosion resistance are much better than simple Ni-P coatings. Furthermore the surface appearance and structure of the composite Ni-P/n-$Al_2O_3$ coating were investigated by SEM and XRD method. It was proved that the coating surface is typical cystiform cells and its structure is amorphous. All test results ofcomposite coating showed that all various physical coating properties had been improved by adding nano-particles. The hardness of optimal coating is more than 600HV and increases to 1000HV after heat-treating, and its hardness is 20~50% higher than Ni-P coating. The rust points appeared in 200 hour by immersing the coating into the 10%HCl solution and the corrosive speed is $3{\times}10^{-3}mg/(cm^2{\cdot}h)$which was obtained after 300 hour. In the same condition Ni-P coating is $5.6{\times}10^{-3}mg/(cm^2{\cdot}h)$. The salt spray resistance of the layers can exceed 600h with the thickness $20{\mu}m$.

• 분석과학
• /
• 제5권1호
• /
• pp.143-152
• /
• 1992

본 연구는 니켈기 초내열 합금 KM 1557의 내식성 및 고온 산화 성질을 조사하기 위하여 황산, 염산, 질산, 인산 및 초산에서의 부식시험과 $900^{\circ}C$, $950^{\circ}C$, $1050^{\circ}C$에서의 고온산화시험, 그리고 $900^{\circ}C$에서 75% $Na_2SO_4-25%$ NaCl 염욕에서 고온황화 침지시험을 실시하였다. 각 시험 후 시편의 단면을 광학현미경으로 관찰하였으며, EPMA 및 X-ray mapping으로 분석하여 시편의 조성분포를 조사하였다. 각종 산에서의 내식성 및 염욕에서의 고온 내식성은 우수하였으며 고온산화시험 결과 산화물의 양은 내부 및 입계간 산화물인 $Al_2O_3$층의 깊이에 주로 영향을 받는 것으로 나타났다.

• Journal of Chest Surgery
• /
• 제29권12호
• /
• pp.1299-1305
• /
• 1996

고칼륨과 저온이 혈관내피세포의 acetylcholine(Ach)에 의한 혈관이완에 미치는 영향을 알아보기 위하여 흰쥐의 흉부 대동맥을 이용하여 Ach과 sodium nitroprusside(SNP)에 대한 이완 반응을 측정하였다. 실험은 다섯 군으로 나누어서 실시하였으며 각 군을 10례로 하였다. 1군은 대조군으로 어떤 조작도 가하지 않고 organ bath에서 등랑성 긴장도를 측정하였고, 2군(내피세포 제거군)은 내피세포를 물리적으로 제거후 1군과 같은 방법으로 긴장도를 측정하였고, 37$^{\circ}C$ 57에 45분간 처리후 혈관의 등장성 긴장도를 측정하였다. 대조군, 457,4mST및 3757군에서의 Ach에 대한 혈관의 이완은 유의한 차이가 없었으며,내피세포 제거군에서는 Ach에 대한 혈관의 이완이 대조군에 비해 현저하게 감소되었으며, SUP에 대한 혈관의 이완은 모든 군에서 유의한 차이가 없었다. 이에 저자들은 다음과 같은 결론을 내릴 수 있었다. 고농도의 칼륨과 저온자체는 흰쥐의 흉부대동맥 내피세포의 Ach에 대한 이완능을 저해하지 않는다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.382-385
• /
• 2008

In the present study, the effect of cold reduction ratio on the spheroidization rate of SK85 high carbon steel sheet was investigated. High carbon steel sheet fabricated by POSCO was soaked at $850^{\circ}C$ for 2 hr in a box furnace and then treated at $570^{\circ}C$ and $670^{\circ}C$ for 10 min in a salt bath furnace followed by water quenching to obtain a fine pearlite structure and coarse pearlite structure. Cold rolling was conducted on the sheets by reduction ratios of 20, 30, and 40 % and heat treatment for spheroidization was carried out at $720^{\circ}C$ for the various time intervals from 1 to 32 hrs. Area fraction of spheroidized cementite was measured with an image analyzer as a function of cold reduction ratios and duration times.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.350-353
• /
• 2009

In the present study, the effect of initial microstructure, cold reduction ratio, and annealing temperature on the spherodization rate of SK85 high carbon steel sheet was investigated. High carbon steel sheet fabricated by POSCO was soaked at $800^{\circ}C$ for 2 hr in a box furnace and then treated at $570^{\circ}C$ for 5 min in a salt bath furnace followed by water quenching to obtain a fine pearlite structure. Cold rolling was conducted on the sheets of fine pearlite by reduction ratios of 20, 30, and 40% and heat treatment for spheroidization was carried out at 600 and $720^{\circ}C$ for the various time intervals from 0.1 to 32 hrs. Area fraction of spheroidized cementite was measured with an image analyzer as a function of cold reduction ratios and duration times.

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.940-948
• /
• 2007

The Advanced Spent Fuel Conditioning Process(ACP), which is the process of the reduction of uranium oxide by lithium metal in a high temperature molten salt bath for spent fuel, was developed at Korea Atomic Energy Research Institute (KAERI). Since the ACP equipment is located in an intense radiation field (hot cell) as well as in a high temperature, it must be remotely operated and maintained. The ACP hot cell is very narrow so the workspace of the wall-mounted mechanical Master-Slave Manipulators(MSMs) is restricted. A Bridge Transported Servo Manipulator(BTSM) system has been developed to overcome the limitation of an access that is a drawback of the mechanical MSMs. The BTSM system consists ot a bridge crane with telescoping tubeset, a slave manipulator, a master manipulator, and a control system. We applied a bilateral position-position control scheme with friction compensation as force-reflecting controller. In this paper, the transmission characteristics on the tendon-and-pulley train is numerically formulated and analyzed. Also, we evaluate the performance of the force-reflecting servo manipulator.

• 한국식품영양학회지
• /
• 제11권4호
• /
• pp.409-415
• /
• 1998

This study was carried out to investigate the effects of freezing temperature on quality of vacuum packaging freezed beef. In case of thaw drip loss, the freezing of -3$^{\circ}C$ and -20$^{\circ}C$ were 5.23% and 5.17% to 60 days respectively, were increased significantly during freezing. The cooking loss of water bath and pan were increased significantly during freezing than the beginning of freezing, but were no different between -3$^{\circ}C$ and -20$^{\circ}C$. The salt soluble protein extractability was decreased during freezing, the -20$^{\circ}C$ freezing was higher than -3$^{\circ}C$freezing. The water soluble protein extractability was increased during freezing higher than during freezing. The myoglobin denatured percentage of the -3$^{\circ}C$ freezing was higher than -20$^{\circ}C$ freezing, the 15 days storage of -3$^{\circ}C$ freezing was highest to 96%. The shear force value was not change during freezing, the myofibrillar fragmentation index during freezing was higher than the beginning of freezing, but was not change during freezing. The pH was decreased to freezing 45 days, after that increased.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.81-88
• /
• 1999

This paper was carried out to know the influence of advanced austempered ductile cast iron (ADI) on the tool life and mechanical properties of drilling machinability. For manufactured method of ADI, the spheroidal graphite cast iron were austenized at 90$0^{\circ}C$ for 1 hour and then austempered for 2 hour at 37$0^{\circ}C$ in the salt bath. And interrelationship has been investigated between tool life and mechanical characteristics of specimen material on drilling condition when the ordinary and step-feed drilling are carried out to drill holes of specimens. Tensile strength and hardness of ADI decrease and elongation of ADI increases with the increase austempered temperature. It is known that about 2 times of tool life in the case of step-feed decreases compared with ordinary feed due to the high hardness of ADI and hardness ascribed to the fact that retained austenite became to martensite state due to cutting heat in drilling. Under the constant feed rate 0.1mm/rev relation between hardness and length of end tip after drilling can be formularized to Hv=$788.46L^{-0.096}$ for the cutting speed 6.1m/min.

• 소성∙가공
• /
• 제22권3호
• /
• pp.158-164
• /
• 2013

The spheroidization behavior of cementite in a SK85 high carbon steel was investigated in this study. Fine and coarse pearlite microstructures were obtained by appropriate heat treatments according to the TTT diagram of SK85 high carbon steel. Hot rolled plates of SK85 steel were austenitized at $800^{\circ}C$ for 2 hrs and then put directly into a salt bath at either $570^{\circ}C$ or $670^{\circ}C$ to obtain a fine pearlite (FP) structure and a coarse pearlite (CP) structure, respectively. Cold rolling was subsequently conducted on those specimens with reduction ratios from 0.2 to 0.4. Spheroidization heat treatments were conducted at the subcritical temperatures of 600 and $720^{\circ}C$ for 1 to 32 hrs to elucidate the effect of initial microstructures, heat treatment temperature, and cold reduction ratios on the cementite spheroidization rate. Spheroidization proceeded with fragmentation of cementite plates, spheroidization of the cementite platelets, and coarsening consecutively. Mechanical fragmentation of cementite by cold rolling expedited the rate of spheroidization. The spheroidization rate of FP was much more rapid than that of CP and the spheriodization rate increased with increases in the cold reduction ratio.