• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.124.2-124.2
• /
• 2016

Corrosion resistance and adhesion of electro-paint (E-paint) with fluoride conversion coating (FCC) on AZ31 Mg alloy were studied. Corrosion resistance and adhesion were studied as a function of FCC-treatment time and concentration of FCC-bath. Aqueous hydrogen fluoride (HF) solutions, with concentrations ranging from 0.5 M to 5 M, were used to form FCC on chemically polished AZ31 Mg alloy samples for six different times; 10, 30, 60, 90, 120, and 180s. The results from salt spray test (SST) showed that corrosion resistance of E-paint appeared to decrease with increasing FCC treatment times in low concentration FCC baths. The number of blisters formed on the FCC-treated samples increased with increasing FCC treatment time of more than 1 min in low concentration (0.5 M to 1 M) solutions. On the other hand, samples treated in the 5 M HF solution for 120s showed no delamination or blistering even after 1200h of SST.

• 소성∙가공
• /
• 제13권4호
• /
• pp.350-358
• /
• 2004

The effects of alloying elements on microstructural features and mechanical properties in 0.55%C medium carbon steels were investigated. The samples were austenitized at 105$0^{\circ}C$ for 30min. followed by quenching in a salt bath in the temperature range of 500 ~ $620^{\circ}C$. The addition of Cr resulted in the decrease of the volume fraction of pro-eutectoid ferrite and interlamellar spacing in pearlite and the increase of strength. However, the addition of B caused the increase of the volume fraction of pro-eutectoid ferrite. Reduction of area and Charpy impact values were influenced by the combined effect of microstructural features, such as the volume fraction of pro-eutectoid ferrite, interlamellar spacing and the thickness of lamellar cementite in pearlite.

• 대한기계학회논문집
• /
• 제8권5호
• /
• pp.476-480
• /
• 1984

본 연구에서는 S15C 및 S45C의 이온 질화에 있어서 확산층 및 합성층의 생성 속도를 계산하였고 이를 기초로 질소의 활성화 에너지를 구하였다.

• 대한기계학회논문집
• /
• 제8권3호
• /
• pp.217-223
• /
• 1984

본 논문에서는 이온질화 처리강의 미끄름 마멸현상에 대하여 이론 및 실험적 으로 규명하고 종래의 질화법과 비교하였다. 또한 미끄럼 마멸을 나타내는 일반식 V/L=C*(P/H)를 이용하여 이온질화, 염욕질화 및 가스질화에서의 C 값을 구하였으며 여기에서 V는 마멸체적, L은 마멸길이, P는 마멸하중, H는 경도이며 C는 마멸상수이다.

• 대한물리치료과학회지
• /
• 제1권1호
• /
• pp.187-194
• /
• 1994

The Han Zeong Mag was the typical hydro-therapy of Korea. It looks like hot air bath of western physical therapy. It developed out of the CHO-SEON, King SE JONG(1422). It is warmed fire of pine wood in the room. At first, it runs a temperature about a few hundred and drop to $80^{\circ}C$ through 12 hours then the room air is exceeding dry. After 12h. reheated in the room. Women makes use of that place with bare body. Because for use salt rub of skin. They have low back pain, pain of muscle, muscle spasm, swelling of arthritis, stiffness of joint and it takes effect on the cosmetic of skin. The treatment effect was excellent to pain(28%), next arthritis(25%). But they have not order for treatment of a doctor. It's dangers of heat stroke and heart disease. Imtortant, must educated method of it's use and danger when it's bad use.

• 열처리공학회지
• /
• 제5권1호
• /
• pp.23-31
• /
• 1992

It is investigated that Fe-C-N compound layer, defusion layer, and induction hardened layer produced by nitrocarburizing blend heat treatment in austenitic temperature with high frequency induction heating of mild steel specimen sprayed sursulf salt-bath. As the temperature of blend-heat treatment got increased, the thickness and hardness of compound layer and diffusion layer were increased. Compound layer(max. $35{\mu}m$), diffusion layer (max. 2.5mm) and induction hardened layer were gained in the shortest time 10 sec and in the case of $1000^{\circ}C$ total hardness depth of those was about 3.5mm. When the blend-heat treated specimen was reheated, maximum hardness of compound layer was dropped more than that of the reheated compound layer after sursulf treated, whereas hardness of diffusion layer was increased.

• 한국표면공학회지
• /
• 제19권1호
• /
• pp.13-19
• /
• 1986

Manganese in the Anode slime and the paste-positive material of waste-dry cell was recovered by leaching with the hydrochloric acid solution. The impurities (Zn, Fe, Pb), co-leached with manganese were removed from the leached solution prior to electrolysis by hydrometallurgical techniques such as the neutralization with ammonium hydroxide and cementation on manganese powder. The electrodeposition of manganese from the purified chloride solution with sodium selenate was performed. Cathode current efficiency was found to be affected significantly by the concentration of sodium selenate and ammonium chloride salt, bath temperate, current density and PH. The current efficiency of about 88.7% was obtained by electrolysis manganese chloride solution with sodium selenate (0.1/g) at 10$^{\circ}C$.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.543-546
• /
• 2008

In the present study, the effect of cold reduction ratio on the spherodization rate of SK85 high carbon steel sheet was investigated. High carbon steel sheet fabricated by POSCO was soaked at $800^{\circ}C$ for 2 hr in a box furnace and then treated at $570^{\circ}C$ for 5 min in a salt bath furnace followed by water quenching to obtain a fine pearlite structure. Cold rolling was conducted on the sheets of fine pearlite by reduction ratios of 20, 30, and 40 % and heat treatment for spheroidization was carried out at $720^{\circ}C$ for the various time intervals from 0.1 to 32 hrs. Area fraction of spheroidized cementite was measured with an image analyzer as a function of cold reduction ratios and duration times.

• 소성∙가공
• /
• 제13권5호
• /
• pp.415-421
• /
• 2004

The effect of transformation temperature on microstructural features and their effects on ductility in 0.55%C steels were investigated, compared with in 0.82%C eutectoid steel. The samples were austenitized at 100$0^{\circ}C$ for 30min. followed by quenching in a salt bath in the temperature range of 500 ~ $620^{\circ}C$. It was found that reduction of area(RA) increased with increasing transformation temperature and then, decreased after reaching its maximum value in steels containing pro-eutectoid ferrite less than 6%. The thickness of lamellar cementite was found to be the main factor controlling RA. Additionally, the presence of cementite thickness for the maximum ductility in all the tested steels was observed as about 0.015${\mu}{\textrm}{m}$ for tested steels.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.249-252
• /
• 1999

Boriding is one of the chemical method to increase surface hardness as well as carburizing, and nitriding. Gas boriding and boron paste boriding methods were investigated to replace salt bath boriding. Boron paste boriding method is selected due to safety, small waste and low cost. And then boriding is also carried out micro-pulsed PECVD in order to increase efficiency of boriding. Mechanical properties, microstructure, surface concentration, and depth profile of borided layer is investigated by micro-vickers hardness tester, SEM, XRD, and AES.