• 열처리공학회지
• /
• 제21권3호
• /
• pp.137-143
• /
• 2008

Effect of quenching medium on the mechanical properties of ductil iron GCD 50 has been investigated using ADI treated specimens. The specimens have been austenitized at $900^{\circ}C$ for 2 hours, followed by controlled cooling to $800^{\circ}C$ under the cooling rate of $0.05^{\circ}C/sec$, then austempered at $380^{\circ}C$, $330^{\circ}C$, $280^{\circ}C$ and $230^{\circ}C$ for 1 hour. The specimens treated in the salt of 5% water were found to have higher tensile strength than that of the normal salt bath. Elongation and impact energy increased in proportion to the increase of retained austenite volume fraction. The increase of cooling rate of the salt by the addition of 5% water to the salt resulted in the increase of retained austenite volume fraction and the formation of fine bainitic ferrite.

• 대한화학회지
• /
• 제59권1호
• /
• pp.97-102
• /
• 2015

• 한국표면공학회지
• /
• 제15권2호
• /
• pp.77-81
• /
• 1982

The conditions for the formation of low temperature sulfurized layer and wear characteristics are as follows ; 1. Salt bath KSCN 98%∼K2S 2% showed porous sulfurized layer. 2. Sulfurized layer thickness at 200$^{\circ}C$ and 30minutes time was about 10$\mu\textrm{m}$. 3. Sulfurized layer thickness increased with time.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.332-333
• /
• 2007

The effect of asymmetric rolling on the recrystallization texture of an AA 3003 Aluminum alloy was investigated by X-ray diffraction. It was found that the texture of asymmetrically rolled sheets prior to subsequent heat treatment promoted the formation of the <111>//ND textures, and remained after heat treatment at $275^{\circ}C$ during 20 min in salt bath condition.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.572.1-572.1
• /
• 2006

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.298-303
• /
• 2011

Aramid fibers have been widely used as the reinforcement for composites due to their high modulus and strength. Nowadays the safety measures is required to improve the personal protection. The dyeing of aramid fibers is considered to be very difficult and their dyeing mechanism is not well illucidated. Therefore, this study is to establish the dyeing & printing technology for aramid fibers. The effects of swelling agent and neutral salt in the dye bath on the obtained colors were studied. Also dyeing method of aramid fibers depending on dyeing temperature and dye concentration were established. Color fastness of the dyed aramid fabric with cationic dyes were acceptable excluding light fastness.

• 한국염색가공학회지
• /
• 제6권4호
• /
• pp.46-53
• /
• 1994

Polymer cationic agent was prepared by the initial polymerisation of epichlorohydrin followed by amination with diethylamine. Cotton fibre treated with the polymer (6~8% o.w.f.) is highly cationic and exhibit increased substantivity for reactive dyes under neutral to weakly acid conditions. The modified substrate could be dyed with reactive dyes without salt or a little salt from dye bath. The increased concentration of cationic agents resulted in an increase the colour yield. Futhermore, treated cotton has an electropositive surface charge. Adsorption of Reactive dye can be attributed to both van der waals force and electrostatic attraction.

• 한국염색가공학회지
• /
• 제7권2호
• /
• pp.1-8
• /
• 1995

Polymer cationic agent was prepared by the initial polymerization of epichlorohydrin followed by amination with diethyl-amine. Cotton fibre treated with the polymer (6∼8% o.w.f.) is highly cationic and exhibit increased substantivity for anionic dyes. The modified substrate could be dyed with direct dyes without salt or a little salt from dye bath. The increased concentration of cationic agents resulted in an increase the colour yield. Futhermore, treated cotton has an electropositive surface charge. Adsorption of direct dye can be attributed to both van der waals force and electrostatic attraction.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.219-223
• /
• 1999

A new additive for semi-brightness finish in nickel electroplating, having a quarternary ammonium salt structure, has been developed in this study. The effectiveness of the new additive was tested in laboratory-scale eletroplating tests as well as in a full-scale factory plating line. An examination of the plated surface showed that the new additive is as good as the one produced by the most commonly used additive in the nickel plating industry. The plated surface was examined by SEM, EPMA, and Reflectance Spectroscopy, and was found to be compatible to the one obtained with commercial additives. The new additive has a shelf life comparable with those of other commercially available additives. The additive developed in this study has an excellent potential to be used commercially.

• The Korean Journal of Physiology and Pharmacology
• /
• 제4권1호
• /
• pp.55-61
• /
• 2000

The present study was conducted to investigate the possible role of the sympathetic nervous system in two-kidney, one clip (2K1C) and deoxycorticosterone acetate (DOCA)-salt hypertension. 2K1C and DOCA- salt hypertension were made in Sprague-Dawley rats. Four weeks after induction of hypertension, systolic blood pressure measured in conscious state was significantly higher in 2K1C $(216{\pm}18\;mmHg)$ and DOCA-salt $(205{\pm}29\;mmHg)$ groups than that in control $(128{\pm}4\;mmHg).$ The third branches (＜300 ${\mu}m$ in outer diameter) of the mesenteric artery were isolated and cut into ring segments of $2{\sim}3$ mm in length. Each ring segment was mounted in tissue bath and connected to a force displacement transducer for measurement of isometric tension. The arterial rings were contracted by application of norepinephrine (NE) in a dose-dependent manner. The amplitude of the NE-induced contraction of the vessels was significantly larger in hypertension than in control. The NE-induced contraction was significantly enhanced by neuropeptide Y (NPY) in hypertension. Reciprocally, NPY-elicited vasocontraction was increased by NE in hypertension. These results suggest that the sympathetic nervous system contributes to the development of 2K1C and DOCA-salt hypertension.