• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.433-436
• /
• 2007

We analyzed the sloped ground safety factor, which is not presented in the design specification, using a computational analysis program L-Pile Plus 13.8. To achieve this we chose a required parameter set and a level ground safety factor presented in the design specification, and then determined its values comparing with the change of the safety factor according to the parameter. Using these parameters, we estimated the sloped ground safety factor for the slope of 35 degrees considering the improvement value of the slope presented in the design specification. As a result of this analysis, we obtained the smaller safety factor by about 0.7 times than the case of the level ground and verified that a number of concrete poles fail to assure 1 degree of the safety factor. We, therefore, concluded that an adjustment of the embedment depth is required in the case of the sloped ground.

• 한국안전학회지
• /
• 제21권2호
• /
• pp.128-137
• /
• 2006

Traffic accidents occur due to complex influences of transportation companies, drivers, and road environment. This study found that education and surroundings for transportation companies, driving habits of drivers, and road safety facilities and accessory facilities were main factors that affected strongly traffic accidents. Also, it found that driving habits of drivers could affect accidents heavily more than two other factors. Road safety and accessory facilities were analysed that they affected traffic accidents independently with transportation companies and their own drivers. Therefore, in order to achieve a traffic accident prevention as our main target, those companies need to produce atmosphere that their own drivers can have safety awareness, and related institutions for the above target should run parallel with policy assistance and strict traffic enforcement. In the end, this study suggests that transportation companies should secure manpower wholly being charged with traffic safety and financial resources investing in it.

• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.55-61
• /
• 2024

In this paper, in order to study the relationship between the safety culture of highway management agencies and disaster reduction activities (BCMS), a measurement tool was identified through previous research on safety culture, and the validity of the measurement tool was confirmed through exploratory factor analysis. I want to check. The subjects of the study were workers belonging to disaster reduction activity management system certification organizations among highway management organizations. The highway management agencies are the Korea Expressway Corporation, which manages the functional continuity of national highways nationwide, and 8 of the 21 private road agencies that manage the functional continuity of the highways. The safety culture measurement tool is an indicator that measures safety culture factors, and is reorganized by the researcher based on survey items from previous studies, with management/manager safety values and attitudes, safety communication, safety education and training, and safety regulations/management system as subfactors. A total of 24 questions were comprised of the survey tool. As a result of the study, the result of exploratory factor analysis was that the safety culture scale was extracted into four factors based on theoretical grounds, and the total cumulative variance was 80.360%. When checking the questions for each factor, it was found that all the questions loaded on the factor that was originally intended to be measured. Factor 1 is management, factor 2 is safety, and factor 3 is communication., Factor 4 was named education. Number of questions: 4 management questions, 3 safety questions, communication It consisted of 4 questions and 2 education questions.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 추계학술대회
• /
• pp.113-129
• /
• 2010

Proper pre-safety training is one of core mandatory in order to reduce injuries at the construction fields. In this study, we investigate the employee's opinions of safety training, safety recognition, the actual conditions of safety through survey. As a result of study, incident factors are roughly divided into technical factor, managerial factor, and educational factor. We confirmed that the educational factor led by deficiency of safety awareness and knowledge was the major factor. It needs to be resettled or revised properly to match with the incident trends and the safety training curriculum should also be improved and drastically revised with special quality. The managerial workers' safety recognition is lower than the site ones regarding the correct understanding of the importance of the training.. It suggest that the education method and system in construction fields might have fundamental problems.

• 건설안전기술
• /
• 통권51호
• /
• pp.75-83
• /
• 2010

In terms of deregulation requests from business, incidents at construction sites are rapidly increasing after reducing the regular safety training hours. Especially, to prevent incidents through safety trainings for construction site workers, who have lots of hazardous tasks than general manufacturing, is not only to protect property of both the companies and the country but also to increase their profits. That is why there are loud voices regarding that the safety training is a core mandatory to prevent industrial incidents. But, most companies, as soon as the deregulation for safety training is implemented, mitigated conducting safety trainings to prevent incidents. With this, theincidents are currently to be increased and caught in a vicious circle of many incidents at the smaller companies because of their absentmindedness regarding safety training due to their poorness as subcontractors of major companies, comparing to major companies. This study explains that incident factors are roughly divided into technical factor, managerial factor, and educational factor. And, we confirmed that the educational factor led by deficiency safety awareness and knowledge was the major factor.

• 한국안전학회지
• /
• 제30권2호
• /
• pp.9-13
• /
• 2015

This paper describes the analysis of deterioration characteristics for connection factor used in grounding system. The connection method of grounding system is specified in IEC standard. In order to analyze the deterioration characteristics for connection factor, deterioration test was carried out when the connection factor was buried in salt water and underground. The test connection factors were C-type sleeve, clamp, and exothermic welding. As a consequence, most of the connection factor was corroded, and the electrical resistance decreased after deterioration. The analytical results can be used to establish the safety of grounding system.

• 한국항공운항학회지
• /
• 제25권2호
• /
• pp.12-17
• /
• 2017

Manned aircraft structural design is based on structural safety factor of 1.5, and this safety factor is equivalent to a probability of failure of between 10-2 and 10-3. The target failure probability of FARs is between 10-6 and 10-9 per flight according to aircraft type. NATO released STANAG 4703 to established the airworthiness requirements for small UAV which is less than 150kg. STANAG 4703 requires the Target Level of Safety according to MTOW. The requirements of failure probability for small UAV is between 10-4 and 10-5. In this paper, requirements of airworthiness certification for small UAV were investigated and the relationship of safety factors to the probability of structural failure is analyzed to reduce measure of safety factor and structural weight of unmanned aircraft.

• 기술사
• /
• 제19권1호
• /
• pp.3-11
• /
• 1986

The analysis of Geotechnical stability problems by the limit equilibrium method involve assuming the shape of the failure and then investigating many surfaces of the shape to identify the one on which failure seems most likely to occur. These arbitrary assumptions most frequently concern to the locations or directions of side force on slice and the overall factor of safety is considered identical to the local factor of safety. In this paper, let the factor of safety of a slope at wedge block stage differently, when an upper part of the potential sliding mass has a simple active stress field and the lower part of the passive stress field and overall factor of safety is obtained by the average of local factor and computer program based on the modified wedge Method is proposed for this thesis. The new algorithm based on tile modified new method is made for estimating the safety factor of Earth Dam. Compared with conventional method for many cases tile average values of the factor of safety determined by the modified new method are very nearly the same. For all of the cases studied the difference was found 0.03. Finally this new method is thought to be very useful in slope stability analysis.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.85-89
• /
• 2013

In the current domestic, many industrial accidents have happened. And these are analyzed according to several factors. But it is difficult that they evaluate their business safety. Thus, we conducted a study on business specific safety assessment techniques in order that business know their safety level and perform appropriative safety activities. Study methods are survey and AHP (Analytic Hierarchy Process). Each specific weighting factors to calculate the survey was conducted for safety and consulting experts (20 persons). Weight factor was used to AHP decision support as one of the ways through a number of alternatives to the ratings for the Minesota Multiphasic. Factors are each type of industry, specific industrial scale, disaster type and strength, worker age and tenure period, and region. First, survey was conducted with 20 professionals to estimate the weighting factors. Weights between factors using the AHP analysis tool based on the mean values were calculated. Second, last 3 years between the industrial accidents statistics were used to calculate the weights for each of the rating factors in the Occupational Safety and Health Agency. Grade weights between each factor which was based on the rating of each factor was calculated as the average of three years. Finally, the weights between each factor and the grade weights for each factor using the safety level of the enterprise were calculated so that you can evaluate the weighting.

• 한국농공학회지
• /
• 제33권4호
• /
• pp.105-120
• /
• 1991

This study was performed to investigate the minimum safety factor of embankment in consideration of seismic coefficient by the psuedo-static analysis The variables were cohesion, the internal friction angle, angle of slope, height of seepage, height of embankment, depth of replacement The results obtained were compared with those by Fellenius method, simplified Bishop method and Janbu method. The results were summarized as follows: 1.The increasing rate of the minimum safety factor with the increasing of cohesion appeared larger in Fellenius method and Bishop method than in Janbu method. And that with the increasing of the internal friction angle appeared the lowest value in Janbu method. The minimum safety factor was influenced larger on the internal friction angle than on cohesion. 2.The variation of the minimum safety factor with the height of seepage at 0m and 5 m was nearly similar to Fellenius method, Bishop method and Janbu method. On the other hand, it was decreased suddenly at 25 m. 3.The minimum safety factor with the height of embankment was decreased remarkably under 10 m with the increasing of seismic coefficient. But, it was decreased slowly more than 10 m. As the height of embankment was low, the influence of cohesion appeared larger. 4.In heigher case of the depth of replacement, the phenomenon of reduction of the minimum safety factor appeared remarkably with seismic coefficient increased. And in lower case of the depth of replacement, the minimum safety factor was similar in Fellenius method and Bishop mehtod. But it appeared larger in Bishop method and Janbu method than in Fellenius method with the depth of replacement increased. 5.As the cohesion and the internal friction angle were large, the phenomenon of reduction of the minimum safety factor with the increasing of seismic coefficient appeared remarkably. Also, the influence of seismic coefficient in minimum safety factor appeared larger with the soil parameter increased. 6.When the seismic coefficient was considerated, investigation of the structural body on the slope stability appeared profitably in Fellenius method and Janbu method than in Bishop method.