• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.543-550
• /
• 2022

The U.S. Department of Energy conducts the Solar Decathlon competition as a student-based achievement that encourages sustainable design with energy efficiency and solar energy technologies. In the 2020 competition, the University of Nevada, Las Vegas (UNLV) team designed, fabricated, and constructed a net-zero modular house that applies innovative and highly efficient building technologies. This paper focused on the lessons learned during the early phases of this ongoing modular project. The research methodology included obtaining feedback from key project participants using a well-structured questionnaire. The results showed that the major items/challenges in the project's planning phase included selecting the modular size, planning the construction system, planning the materials and procurement, estimating costs and duration, selecting a fabricator, collaboration and communication, safety, and planning module transportation. These findings will help modular practitioners and future Solar Decathlon competition participants better understand how and what factors they should consider most during the early phases through the lessons learned.

• Journal of Microbiology and Biotechnology
• /
• 제21권9호
• /
• pp.954-959
• /
• 2011

There have been a number of studies conducted in order to compare the efficiencies of recovery rates, utilizing different protocols, for the isolation of L. monocytogenes. However, the severity of multiple cell injury has not been included in these studies. In the current study, L. monocytogenes ATCC 19112 was injured by exposure to extreme temperatures ($60^{\circ}C$ and $-20^{\circ}C$) for a one-step injury, and for a two-step injury the cells were transferred directly from a heat treatment to frozen state to induce a severe cell injury (up to 100% injury). The injured cells were then subjected to the US Food and Drug Administration (FDA), the ISO-11290, and the modified United States Department of Agriculture (mUSDA) protocols, and plated on TSAyeast (0.6% yeast), PALCAM agar, and CHROMAgar Listeria for 24 h or 48 h. The evaluation of the total recovery of injured cells was also calculated based on the costs involved in the preparation of media for each protocol. Results indicate that the mUSDA method is best able to aid the recovery of heat-injured, freeze-injured, and heat-freeze-injured cells and was shown to be the most cost effective for heat-freeze-injured cells.

• 한국건설안전학회 논문집
• /
• 제2권2호
• /
• pp.70-75
• /
• 2019

본 연구는 건설관련 업무를 수행하는 종사자들을 대상으로 DfS제도에 대한 설문을 실시하고 그 결과를 분석하여 개선방향을 제시하는 것을 목적으로 한다. 설문결과는 제도에 대한 인지도 및 필요성에 대해서 약 82%, 93%의 긍정적인 결과가 나타남으로써 제도가 차츰 정착되고 있음을 알 수 있었다. 또한, 제도의 개선방향에 대해서 가장 높은 응답율을 나타낸 3가지는 첫째, DfS관련 수행인원의 전문성 향상, 둘째, DfS관련 주체들의 인식개선, 셋째, DfS관련 적정비용 반영이었다. 위 개선사항의 실현을 위한 방안으로는 담당자 전문성 향상을 위한 교육과정 마련, 인식개선을 위한 인센티브제 시행, 시공단계에서 활용가능한 보고서 작성을 위한 적정대가 지급기준 마련을 제안하였다. 아울러 설계단계부터 건설사고 위험요소를 선제적으로 관리하는 제도가 되기 위하여 한국시설안전공단의 적극적인 역할수행이 필요할 것이다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.277-278
• /
• 2001

The successful operation of a product In service depends upon the effective provision of logistic support in order to achieve and maintain the required levels of performance and customer satisfaction. Logistic support encompasses the activities and facilities required to maintain a product (hardware and software) in service. Logistic support covers maintenance, manpower and personnel, training, spares, technical documentation and packaging handling, storage and transportation and support facilities.The cost of logistic support is often a major contributor to the Life Cycle Cost (LCC) of a product and increasingly customers are making purchase decisions based on lifecycle cost rather than initial purchase price alone. Logistic support considerations can therefore have a major impact on product sales by ensuring that the product can be easily maintained at a reasonable cost and that all the necessary facilities have been provided to fully support the product in the field so that it meets the required availability. Quantification of support costs allows the manufacturer to estimate the support cost elements and evaluate possible warranty costs. This reduces risk and allows support costs to be set at competitive rates.Integrated Logistic Support (ILS) is a management method by which all the logistic support services required by a customer can be brought together in a structured way and In harmony with a product. In essence the application of ILS:- causes logistic support considerations to be integrated into product design;- develops logistic support arrangements that are consistently related to the design and to each other;- provides the necessary logistic support at the beginning and during customer use at optimum cost.The method by which ILS achieves much of the above is through the application of Logistic Support Analysis (LSA). This is a series of support analysis tasks that are performed throughout the design process in order to ensure that the product can be supported efficiently In accordance with the requirements of the customer.The successful application of ILS will result in a number of customer and supplier benefits. These should include some or all of the following:- greater product uptime;- fewer product modifications due to supportability deficiencies and hence less supplier rework;- better adherence to production schedules in process plants through reduced maintenance, better support;- lower supplier product costs;- Bower customer support costs;- better visibility of support costs;- reduced product LCC;- a better and more saleable product;- Improved safety;- increased overall customer satisfaction;- increased product purchases;- potential for purchase or upgrade of the product sooner through customer savings on support of current product.ILS should be an integral part of the total management process with an on-going improvement activity using monitoring of achieved performance to tailor existing support and influence future design activities. For many years, ILS was predominantly applied to military procurement, primarily using standards generated by the US Government Department of Defense (DoD). The military standards refer to specialized government infrastructures and are too complex for commercial application. The methods and benefits of ILS, however, have potential for much wider application in commercial and civilian use. The concept of ILS is simple and depends on a structured procedure that assures that logistic aspects are fully considered throughout the design and development phases of a product, in close cooperation with the designers. The ability to effectively support the product is given equal weight to performance and is fully considered in relation to its cost.The application of ILS provides improvements in availability, maintenance support and longterm 3ogistic cost savings. Logistic costs are significant through the life of a system and can often amount to many times the initial purchase cost of the system.This study provides guidance on the minimum activities necessary to Implement effective ILS for a wide range of commercial suppliers. The guide supplements IEC60106-4, Guide on maintainability of equipment Part 4: Section Eight maintenance and maintenance support planning, which emphasizes the maintenance aspects of the support requirements and refers to other existing standards where appropriate. The use of Reliability and Maintainability studies is also mentioned in this study, as R&M is an important interface area to ILS.

• 한국산학기술학회논문지
• /
• 제21권7호
• /
• pp.638-644
• /
• 2020

본 연구는 항공기 하중에 따라 발생하는 균열을 가정하여 항공기 취약 구조의 수명을 분석하고 구조 보강 개선을 수행하였다. 항공기 구조의 선제적 수명 예측 및 수명 관리를 통해 구조 건전성 및 안전성을 확보하였다. 특히, 항공기 구조물 취약부위의 수명 분석을 통해 운용 하중의 영향이 큰 Bulkhead의 개선이 필요한 3부위를 선정하였다. 분석 대상 항공기의 균열크기 검사능력은 0.03inch 수준과 비교하여 임계균열크기는 취약 3부위 중 최하인 0.032inch이다. 상대적으로 검사능력 대비 임계균열크기가 매우 적어 항공기 안전을 위해 개선이 필요하다. 그리고 피로수명 해석 결과 항공기 요구 수명인 15000 운용시간 이상 대비 취약 3부위 중 최하인 약 1450 운용시간은 항공기 초기검사 및 재검사 시간의 반복 횟수를 증가시켜 비용 및 인력의 소요를 발생시킨다. 결국, 식별된 취약 3부위의 구조 보강을 통해 형상을 개선하였다. 발생 균열에 대한 구조 내성의 증가를 통해 최하의 임계균열크기가 0.13inch로 확보되어 항공기 안전성이 증가하였다. 항공기 운용 중 발생하는 균열에 대한 최하의 구조 피로수명은 >25000 운용시간으로서 요구 수명 이상으로 분석되어 균열 및 파단에 의해 발생하는 수리비용과 과도한 보강범위 보다 최적화된 개선을 수행하였다.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.50-61
• /
• 2018

방위력개선사업의 선행연구는 소요가 결정된 무기체계의 효율적인 획득방법 결정을 지원하기 위해 사업초기 단계에 수행되고 있다. 사업 초기단계의 선행연구는 그 중요성이 간과되어 소홀히 진행되어 왔으며, 이로 인한 성능 미충족 및 비용증가 등의 사업추진간 문제점이 지속적으로 발생되고 있다. 제한된 시간내 많은 항목의 선행연구를 수행한 결과, 핵심검토항목을 깊이 있게 검토하지 못함으로써 사업추진간 예상되는 위험을 식별하고 감소시키는 역할을 제대로 수행하지 못하고 있다. 따라서, 본 논문에서는 방위력개선사업 선행연구 단계에서 수행시 고려해야 할 핵심요소들을 식별하기 위해 시스템안전 분석과정에서 사용되고 있는 FTA/FMEA 기법의 활용에 대해 연구하였다. 구체적으로 수행방안 도출시 FTA/FMEA 기법의 적용에 대한 착안점 및 주어진 조건에 부응하도록 개선을 통해 핵심검토 항목 도출을 위한 방법론을 구축하였다. 본 연구의 결과를 토대로 방위력개선사업 선행 연구단계에서 핵심 수행요소 재정립을 통해 향후 방위력 개선사업의 사업관리 측면에서 발생할 수 있는 불필요성 및 예상되는 위험을 제거함에 따라, 비용 및 시간을 절감하고 위험감소를 통한 사업의 안정적 추진을 기대할 수 있을 것으로 기대된다.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.435-448
• /
• 2013

The aim of this study is to investigate and develop the extended models for Economic Cash Amount(ECA), Cash Break Even-Point(BEP), and Cash Flow Statement(CFS) by referencing systematic literature review in the field. The study develops three extended models to determine the optimal cash amount: ECA model with interest opportunity cost, financing transaction cost and financing fail cost, ECA model with daily cash supply and interest opportunity cost, ECA model with financing fail cost and interest opportunity cost. Earnings Before Interests, Tax, Depreciation and Amortization(EBITDA) is obtained by subtracting noncash depreciation costs from Earning Before Interest and Tax(EBIT), which is efficient metric to evaluate operating cash flow. The research also develops two extended Cash BEP models, considered as interest and corporate tax, in order to indentify the break-even point as EBITDA equals zero. Furthermore, this paper proposes the modified version of CFS by introducing the reclassification of operating and financing accounts in the statement of financial position. In addition, the study also present the reclassification of five types of profit, such as gross profit, EBIT, ordinary profit, special profit, and net profit within the statement of comprehensive income. In order to provide a better understanding of the proposed cash flow models, numerical examples, such as two-sample t test and Analysis of Variance(ANOVA), are presented to demonstrate the statistical significance according to the industrial types for net working capital(i.e cash-to-cash), net profit, operating cash flow and free cash flow.

• 한국건설관리학회논문집
• /
• 제7권6호
• /
• pp.151-164
• /
• 2006

선진 외국에서는 1990년대 초반부터 재래식 도로면 크랙실링 작업의 생산성 및 안전성, 품질을 향상시키고, 도로 이용자의 간접비용을 줄이기 위한 하나의 기술적 접근방법으로 도로면 크랙실링 자동화 장비를 개발하기 위해 다양한 연구노력을 수행해 오고 있다. 최근 국내에서도 도로면 크랙실링 공법의 효용성을 인지하고 재래식 크랙실링 작업을 자동화하기 위해 도로면 크랙실링 자동화 장비(APCS)를 개발해 오고 있다. 본 연구에서는 개발된 크랙실링 자동화 장비의 현장 실험시 재래식 방식과 자동화 방식의 생산성을 효과적으로 비교 측정할 수 있는 생산성 측정 모델을 개발하고, 이를 통해 도출된 생산성 데이터를 바탕으로 경제성 분석 기법(편익/비용 비율 분석, 수익률 분석, 손익분기점 분석, 민감도 분석)을 활용하여 자동화 방식을 도입 적용함으로써 얻을 수 있는 경제적 타당성 분석을 수행하고자 한다. 또한, 재래식 크랙실링 방식을 자동화함으로써 얻을 수 있는 사회적 편익 즉, 교통 혼잡 비용의 감소로 인한 경제적 편익을 시뮬레이션 기법을 활용하여 분석하고자 한다. 이를 통해, 재래식 방식과 비교한 자동화크랙실링 방식의 경제적 타당성 및 사회적 편익을 정량적으로 분석 제시함으로써 개발된 크랙실링 자동화 장비의 실용화 가능성을 높일 수 있을 것으로 기대된다.

• 한국안전학회지
• /
• 제26권2호
• /
• pp.89-98
• /
• 2011

The traffic accidents at a construction site, which happen due to construction vehicles' frequent access to a construction site, its subsequent conflicts with ordinary vehicles and pedestrians, and inappropriate installation & management of traffic security facilities, have not many proportions in all traffic accidents, but obviously, the accident damage is quite serious when comparing the level of the fatal per one accident. This research conducted an analysis of traffic accident injury severity using Ordered Probit Model in relation to 241 traffic accident cases that occurred caused by construction sites among the traffic accidents that took place in Seoul and Gyeoggi-do region for two years from 2006 until 2007. As a result, the significant variables enough to explain traffic accident injury severity were analyzed to be the state of road surface, linear shape of an accident spot & whether the damaging car belongs to the vehicle for construction, and whether vehicles have access to a construction site at the time of an accident. Through this, this research found out some fact as follows: first, there need to be more aggressive management of the vehicles for construction and a year-round placement of the manpower who can control vehicular access to a construction site. Second, it is necessary to get drivers to recognize the fact that there exists a construction site on the construction section which is on the border of curved roads in advance to prevent a traffic accident, helping to reduce socioeconomic loss & costs incurred by a traffic accident.

• 보건행정학회지
• /
• 제25권2호
• /
• pp.67-70
• /
• 2015

To establish an appropriate policy for robotic surgery in Korea, the National Evidence-based Collaborating Agency (NECA) and the Korean Society of Health Policy and Administration held a round-table conference (RTC) to gather opinions through a comprehensive discussion of scientific information in gastric cancer. The NECA RTC is a public discussion forum wherein experts from diverse fields and members of the lay public conduct in-depth discussions on a selected social issue in the health and medical field. For this study, representatives from the medical field, patient groups, industry, the press, and policy makers participated in a discussion focused on the medical and scientific evidence for the use of robotic surgery in gastric cancer. According to the RTC results, robotic surgery showed more favorable results in safety and efficacy than open surgery and it is similar to laparoscopy. When the cost-effectiveness of robotic surgery and laparoscopy is compared, robotic surgery costs are higher but there was no difference between the two of them in terms of effectiveness (pain, quality of life, complications, etc.). In order to resolve the high cost issue of the robotic surgery, a proper policy should be implemented to facilitate the development of a cost-effective model of the robotic surgery equipment. The higher cost of robotic surgery require more evidence of its safety and efficacy as well as the cost-effectiveness issues of this method. Discussions on the national insurance coverage of robotic surgery seems to be necessary in the near future.