• 한국식품위생안전성학회지
• /
• 제31권5호
• /
• pp.327-334
• /
• 2016

본 연구는 "축산물의 가공기준 및 성분규격"에 기준규격은 설정되어 있지 않으나, 국제 기준과의 조화를 위해 규격 신설 검토 대상 성분인 비오틴의 분석법을 마련하고자 수행하였다. 조제유류에 미량으로 함유된 비오틴함량 분석을 위해 선택성과 정밀성이 뛰어난 LC-MS/MS를 이용한 분석법을 확립하고 시중에 유통중인 제품을 대상으로 적용성을 검토하였다. 비오틴 표준품을 이용하여 LC-MS/MS를 이용한 기기분석조건을 확립하고, 식품의 기준 및 규격 분석법을 참고로 0.01 M 인산이수소칼륨(pH 4.8) 용액을 이용하여 시료중의 비오틴을 추출하여 분석하였다. 분석법 검증은 특이성, 직선성, 검출한계 및 정량한계, 정확성, 정밀성에 대해 수행되었다. 5~60 ng/mL의 농도범위에서 $R^2=0.999$ 이상의 우수한 직선성을 확인할 수 있었으며, LOD와 LOQ는 각각 0.10, 0.31 ng/mL 이었다. CRM (NIST SRM 1849a) 및 표준물질 첨가법을 이용하여 정확성을 검토하였으며, CRM에서 103%, 조제분유에서 101~104%, 조제우유에서 99~101%의 회수율을 확인할 수 있었다. 정밀성을 검토한 결과 시료 채취량에 따른 상대표준편차가 조제분유 0.4~0.9%, 조제우유1.4~1.6%로 확인하였으며, 실험일자에 따른 재현성은 조제분유에서 1.3%, 조제우유에서 1.2%로 확인하였다. 본 연구에서 확립된 분석법을 적용하여 조제분유 39건, 조제우유 3건, 성장기용조제분유 23건 등 국내 유통중인 조제유류 65건에 대해 적용성 검토를 실시한 결과 전체시료에서 분석이 용이하였으며, 모두 표시기준에 적합함을 확인하였다.

• 한국환경농학회지
• /
• 제40권2호
• /
• pp.108-117
• /
• 2021

BACKGROUND: Dichlobentiazox is a newly registered pesticide in Korea as a triazole fungicide and requires establishment of an official analysis method for the safety management. Therefore, the aim of this study was to determine the residual analysis method of dichlobentiazox for the five representative agricultural products. METHODS AND RESULTS: Three QuEChERS methods were applied to establish the extraction method, and the EN method was finally selected through the recovery test. In addition, various adsorbent agents were applied to establish the clean-up method. As a result, it was found that the recovery of the tested pesticide was reduced when using the d-SPE method with PSA and GCB, but C₁₈ showed an excellent recovery. Therefore this method was established as the final analysis method. For the analysis, LC-MS/MS was used with consideration of the selectivity and sensitivity of the target pesticide and was operated in MRM mode. The results of the recovery test using the established analysis method and inter laboratory validation showed a valid range of 70-120%, with standard deviation and coefficient of variation of less than 3.0% and 11.6%, respectively. CONCLUSION: Dichlobentiazox could be analyzed with a modified QuEChERS method, and the method determined would be widely available to ensure the safety of residual pesticides in Korea.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권3호
• /
• pp.85-91
• /
• 2021

건축시설물 중 제1종 시설물과 제2종 시설물은 유지관리를 위해 정기적으로 정밀안전점검과 정밀안전진단을 실시한다. 건축물의 점검 및 진단을 실시하는 경우 상태평가, 기울기 및 침하, 안전성평가를 종합하여 건축물의 등급이 결정된다. 그리고 평가등급은 점검 및 진단의 주기를 결정한다. 평가 등급이 좋지 않다면 점검 및 진단 주기는 짧아지고, 이로 인한 유지관리 비용은 증가하게 된다. 따라서 건축물을 평가하는 방법은 명확하여야 한다. 상태평가는 부재단위 평가, 층단위 평가, 종합 평가로 이루어진다. 이 중 부재단위 평가는 현장조사와 시험 결과를 통해 등급을 판정한다. 본 연구에서는 상태평가의 첫 번째 단계인 부재단위 평가에 대해 평가방법과 평가기준을 분석하여 개선점을 도출하였으며, 이를 개선하여 현재 부재의 상태점수를 반영할 수 있는 함수식을 제시하였다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.42-42
• /
• 2018

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.97-97
• /
• 2019

사삼(沙蔘, Adenophorae Radix)은 "대한민국약전외한약(생약)규격집(KHP)"에 잔대 Adenophora triphylla var. japonica Hara 또는 사삼(당잔대, A. stricta Miq.)의 뿌리로 수재되어 있으나, 형태학적으로 유사한 제니(모시대, A. remotiflorus Miquel), 층층잔대(윤엽사삼, A. tetraphylla (Thunb.) Fisch), 더덕 Codonopsis lanceolata (Sieb. et Zucc.)과 오 혼용 우려가 있어 이들을 구별하기 위한 종 감별법이 필요하다. 본 연구에서는 '사삼'과 오 혼용 우려가 있는 종들을 구별할 수 있는 유전자 마커 개발을 위하여 DNA 바코드로 활용되고 있는 유전자 부위를 분석하여 ITS (25%), atpB-rbcL (15%), atpF-atpH (14%), rpl16 (13%), trnL-F (10%), matK (9%), rpoC1 (7%)에서 변이율(percent of variable sites)을 확인하였다. 또한, 분석한 유전자 부위 중 종간 차이를 확인하기 용이한 matK 구간을 활용해 기원종인 잔대, 당잔대와 형태적으로 유사하여 오 혼용될 우려가 있는 층층잔대, 모시대 및 더덕을 감별 할 수 있는 유전자 마커를 개발하였다. 본 연구를 통해 얻어진 염기서열과 분자 마커는 '사삼'의 품질관리에 유용하게 활용 가능할 것으로 사료된다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.98-98
• /
• 2019

제니(薺苨, Adenophorae Remotiflori Radix)는 "대한민국약전외한약(생약)규격집(KHP)"에 모시대(Adenophora remotiflorus Miquel)의 뿌리로 수재되어있으나, 형태학적으로 유사한 잔대(A. triphylla), 당잔대(A. stricta) 및 더덕(Codonopsis lanceolata)과 오 혼용 우려가 있어 이들을 구별하기 위한 정확하고 객관적인 종 감별법이 필요하다. 본 연구에서는 '제니'의 기원인 모시대와 오 혼용 우려가 있는 종들을 구별 할 수 있는 유전자 마커를 개발하기 위하여 Genbank에 등록된 ycf2 구간을 활요하여 모시대와 잔대, 당잔대를 구분 할 수 있는 INDEL (insertion/deletion) 마커를 개발하였다. 또한, 보다 정확한 종감별을 위해 DNA 바코드로 활용되고 있는 유전자 부위의 염기서열을 분석하여 ITS (25%), atpB-rbcL (15%), atpF-atpH (14%), rpl16 (13%), trnL-F (10%), matK (9%), rpoC1 (7%)에서 변이율(percent of variable sites)을 확인하였다. 향후, 본 연구에서 개발된 INDEL 마커와 더불어 추가적으로 개발을 진행 중인 분자 마커는 한약재 '제니'의 품질관리에 활용 가능할 것으로 사료된다.

• 대한인간공학회지
• /
• 제35권2호
• /
• pp.75-84
• /
• 2016

Objective: The aim of this study is to suggest some improvement ideas based on the validity and the reliability analyses of the current safety culture measurement method applied to the Korean nuclear power industry. Background: Wrong safety culture is known as one of the major causes of the disasters such as the space shuttle Columbia disaster or the Fukushima Nuclear Power Plant accident. Assessment of safety culture of an organization is important to build a safer organizational environment as well as to identify the risks hidden in the organization. Method: A face validity of the current safety culture measurement method was analyzed by comparison of the key factors of safety culture in the Korean nuclear power industry with those factors reviewed in the previous studies. The current interview method was analyzed to identify the problems which degrade the consistency of evaluation. Results: Most safety culture factors reviewed in the literatures are covered in the list of the Korean nuclear power industry safety culture factors. However the unstructured questions used in the interview may result in inconsistency of safety culture evaluation among interviewers. Conclusion: This study suggests some examples which might improve the consistency of interviewers' evaluation on safety culture such as a post interview evaluation form. Application: An extended post interview evaluation form might help to increase the accuracy of the interviewing method for Korean nuclear industry safety culture evaluation.

• 품질경영학회지
• /
• 제49권2호
• /
• pp.127-143
• /
• 2021

Purpose: Smart Safety Living Lab is a Living Lab facility, constructed and operated by KITECH in Korea, to support the user experience(UX) evaluation, planning and certification of smart safety products and services. The purpose of this study is to develop a UX evaluation methodology that accommodates the characteristics of the Living Lab and smart safety products and services for a systematic and efficient UX evaluation in the Smart Safety Living Lab. Methods: A generic model of UX evaluation was first derived based on a review of related literature. Then, the generic model is revised to accommodate the characteristics of the Smart Safety Living Lab and smart safety products and services, resulting in the UX Evaluation Methodology for Smart Safety Living Lab (SSLL-UXEM). Results: The developed SSLL-UXEM consists of a structured process for UX evaluation, a guideline for conducting each step of the process, and a set of forms for recording the major evaluation results in each step. Conclusion: SSLL-UXEM can help to enhance the efficiency of the UX evaluation process and the consistency of the UX evaluation results. SSLL-UXEM is also expected to serve as a basis for UX evaluation in various living lab environments in the future.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1657-1667
• /
• 2007

This study propose a model for railway safety evaluation with which the safety of whole railway system can be evaluated. The evaluation model is to generate a safety index which quantitatively represent the degree of railway safety. Safety index is proposed a function of three indexes; an accident index, safety management index, and safety culture index. This paper describes the first result from the study on the safety target which will be a key starting point toward the development of safety evaluation model. It is recommended that the safety target be composed of several sub-targets that are apportioned to constituent components. It is concluded that the classification of safety target influence on deciding components or attributes that constitute each sub-indexes; an accident index, safety management index, and safety culture index. Based on this study, a railway safety evaluation model will be developed in the next study.

• Biomolecules & Therapeutics
• /
• 제22권4호
• /
• pp.363-369
• /
• 2014

Synthetic cannabinoids (CBs) such as the JWH series have caused social problems concerning their abuse liability. Because the JWH series produces euphoric and hallucinogenic effects, they have been distributed illegally under street names such as "Spice" and "Smoke". Many countries including Korea have started to schedule some of the JWH series compounds as controlled substances, but there are a number of JWH series chemicals that remain uncontrolled by law. In this study, three synthetic CBs with different binding affinities to the $CB_1$ receptor (JWH-073, 081, and 210) and ${\Delta}^9$-tetrahydrocannabinol (${\Delta}^9$-THC) were evaluated for their potential for psychological dependence. The conditioned place preference test (unbiased method) and self-administration test (fixed ratio of 1) using rodents were conducted. $K_i$ values of the three synthetic cannabinoids were calculated as supplementary data using a receptor binding assay and overexpressed $CB_1$ protein membranes to compare dependence potential with $CB_1$ receptor binding affinity. All mice administered JWH-073, 081, or 210 showed significantly increased time spent at unpreferred space in a dose-dependence manner in the conditioned place preference test. In contrast, all tested substances except ${\Delta}^9$-THC showed aversion phenomenon at high doses in the conditioned place preference test. The order of affinity to the $CB_1$ receptor in the receptor binding assay was JWH-210 > JWH-081 >> JWH-073, which was in agreement with the results from the conditioned place preference test. However, no change in self-administration was observed. These findings suggest the possibility to predict dependence potential of synthetic CBs through a receptor binding assay at the screening level.